In this article, injection processing of wood flour/PP composite and the effects of processing parameters on its mechanical properties are investigated. Injection pressure and pressure holding time were systematically chosen as the critical processing parameters. The results of this research work indicate that increasing injection pressure and holding time has considerable effect on final modulus of elasticity, noticeable decreasing effect on elongation, and insignificant effect on tensile strength.
Yao, F., Wu, Q., Lei, Y. and Xu, Y. ( 2008). Rice Straw Fiber-reinforced High-density Polyethylene Composite: Effect of Fiber Type and Loading, Ind. Crops Prod , 28(1): 63-72.
2.
Czvikovszky, T. ( 1999). Wood-polypropylene Composites-Polypropylene: An A-Z Reference , pp. 882-889, Klower, Amsterdom.
3.
English, B., Celemons, C., Stark, N. and Schneider, J.P. ( 1996). Waste-wood-derived Fillers for Plastics, Fpl-Gtr91. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Product Laboratory.
4.
Chotirat, L. , Chaochanchaikul, K. and Sombatsompop , N. (2007). On Adhesion Mechanisms and Interfacial Strength in ABS/Wood Sawdust Composites , Int. J. Adhesion and Adhesives, 27(8): 669-678.
Clemons, C. ( 2002). Wood-Plastics Composites in the United States, Forest Products Journal, 52(6): 10.
7.
Youngquist, J.A. (1995). Unlikely Partners? The Marriage of Wood and Plastics, Forest Products Journal , 45(10): 25-30.
8.
Dearmitt, D. and Breese, K.D. (2001). Filled Polypropylene: A Cost Performance Comparison of Common Fillers, Plastic Additives and Compounding, 3(9): 28-33.
9.
English, B., Stark, N. and Clemons, C. ( 1997). Weight Reduction: Wood Versus Mineral Fillers in Polypropylene , 4th International Conference on Wood/Fiber-Plastics Composites, pp. 237-244.
10.
Bengtsson, M. , Gatenholm, P. and Oksman, K. (2005). The Effect of Crosslinking on the Properties of Polyethylene/Wood Flour Composites, 65: 1468-1479.
11.
Cui, Y. , Lee, S., Noruziaan, B., Cheung, M. and Tao, J. (2008). Fabrication and Interfacial Modification of Wood/Recycled Plastic Composite Materials, Composites Part A: Applied Science and Manufacturing, 39(4): 655-661.
12.
Sain, M.M. and Kokta, B.V. ( 1994). Polyolefin-wood Filler Composite I: Performance of M-Phenylene Bismaleimide-modified Wood-fiber in Polypropylene Composite, Journal of Applied Polymer Science;54: 1545-1559.
13.
Dalvag, H., Klason, C. and Stromvall, H. ( 1985). The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part II. Filling with Processing Aids and Coupling Agents, Int. Journal of Polymeric Materials, 11: 9-38.
14.
Mathias, L.J. and Wright, J.R. (1993). New Lightweight Materials: Balsa Wood-Polymer Composites Based on Ethyl-a (Hydroxymethyl) Acrylate, Journal of Applied Polymer Science, 48: 2241.
15.
Saheb, D.N. and Jog, J.P. ( 1999.) Natural Fiber Polymer Composites: A Review, Advances in Polymer Technology, 18(4): 351-363.
16.
Coutinho, F.M.B. , Costa, T. and Carvalho, D.L. (1997). Polypropylene-wood Fiber Composites: Effect of Tretment and Mixing Conditions on Mechanical Properties , Journal of Applied Polymer Science, 65: 1227-1235.
17.
Coutinho, F.M.B. and Costa, T. (1999). Performance of Polypropylene-wood Fiber Composites, Polymer Testing, 18: 581-587.
18.
Gatenholm, P. and Felix, J.M. ( 1993). Interphase Design in Cellulose Fiber/Polypropylene Composites , In T.C. Chung, (ed.), New Advances in Polyolefins, pp. 237-244, Plenum Press, New York.
19.
Wu, J., Yu, D., Chan, C., Kim, J. and Mal, Y. ( 2000). Effect of Fiber Pretreatment Condition on the Interfacial Strength and Mechanical Properties of Wood Fiber/PP Composites, Journal of Applied Polymer Science, 76: 1000-1010.
20.
Zhao, Y. et al. (2006). Properties of Poly(vinyl chloride)/Wood flour/Montmorillonite Composites: Effects of Coupling Agents and Layered Silicate, Polymer Degradation and Stability, 91(12): 2874-2883.
21.
Nachtigall, M.B., Cerveira, S.G. and Rosa, M.L. (2007). New Polymeric-coupling Agent for Polypropylene/Wood-flour Composites, Polymer Testing , 26(5): 619-628.
22.
Adhikary, K.B. , Pang, S., Staiger, M.P. (2007). Dimensional Stability and Mechanical Behaviour of Wood-Plastic Composites based on Recycled and Virgin High-density Polyethylene (HDPE), Composites Part B: Engineering, 39(5): 807-815.
23.
Ichazo, M.N. , Albano, C. and Gonzalez, J. (2001). Polypropylene/Wood Flour Composites; Treatments and Properties, Composite Structure , 54: 204-214.
24.
Chanda, M. and Salil, K.R. ( 2007). Plastics Technology Handbook, 4th edn. Boca Raton Publication, CRC Press.
25.
Klyosov, A.A. (2007). Wood-Plastic Composites , Wiley Publications, New Jersey .
26.
Xantos, M. ( 1993). Processing Conditions and Coupling Agent Effects in Polypropylene/Wood Flour Composites, Plastics and Rubber Processing and Applications , 3(3): 223-228.
27.
Takase, S. and Shiraishi, N. ( 1989). Studies on Composites from Wood and Polypropylene, Journal of Applied Polymer Science, 37: 645-659.
28.
Kuruvilla, J., Joseph, P.V. and Thomas, S. (1999). Effect of Processing Variables on the Mechanical Properties of Sisal-fiber-reinforced Polypropylene Composites, Composites Science and Technology, 59: 1625-1640.
29.
Behravesh, A.H., Park, C.B., Pan, M. and Venter, R.D. (1996). Effective Suppression of Cell Coalescence During Shaping in the Extrusion of Microcellular HIPS Foams, 212th National ACS Meeting, Polymer Preprints, 37(2): 767-768.
30.
Baldwin, D.F. , Park, C.B. and Suh, N.P. (1996). An Extrusion System for the Processing of Microcellular Polymer Sheets: Shaping and Cell Growth Control, Polymer Engineering. Science, 36(10): 1425-1435.
31.
Behravesh, A.H. , Ghaasemi, H. and Kowkabi, M. (2002). Production and Processing Parameter Evaluation of Wood-fiber/PP Composites in Twin Extruder, Proceeding of the 10th International Mechanical Engineering Conference, Tehran, Vol. 4, pp. 2414-2418 (in Persian).
