Effects of Organoclay Loading and Ethylene Glycol on Mechanical,Morphology and Thermal Properties of Ethylene Vinyl Acetate/Organoclay Nanocomposites

Abstract

Effects of organoclay loading (organophilic modified montmorillonite with octadecylamine) on the processing properties, tensile properties, morphology, thermal stability and water absorption behavior of ethylene vinyl acetate (EVA)/organoclay nanocomposites were studied. Organoclay loading from 2 to 10 phr was used as a filler in this study. The EVA/organoclay nanocomposites were produced using the melt compounding technique in an internal mixer, Haake Rheometer, at 120^°C and 50 rpm of rotor speed. Ethylene glycol was used to compatibilize the polymer matrix-filler system. The ethylene glycol loading was maintained at 2 phr for all compounding systems. The results indicate that the processing torque increases gradually from 0 to 10 phr of organoclay loading. The tensile strength increases at 2 phr organoclay loading. Young's modulus increases with increasing organoclay loading which slightly reduces the elongation at break. The 2 phr of organoclay loading also showed better thermal stability and less water absorption. These enhanced properties are due to the homogenous dispersion of individual silicate layers in EVA matrix, which is evidenced from the structure that evaluated using X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). This exfoliation was achieved without the addition of compatibilizer. Interestingly, the presence of ethylene glycol reduces the processing torque, improves the tensile strength, elongation at break, and thermal stability of the EVA/organoclay nanocomposites.

Keywords

nanocomposite ethylene vinyl acetate (EVA) copolymer organoclay compatibilizer ethylene glycol.

Get full access to this article

View all access options for this article.

References

Alexandre, M. and Dubois, P. (2000). Polymer-layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials , Mater. Sci. & Eng., Reports: A Review Journal, 28: 1—63.

Arroyo, M. , López-Manchado, M.A. and Herrero, B. (2003). Organo-montmorillonite as Substitute of Carbon Black in Natural Rubber Compounds, Polymer, 44: 2447—2453.

Ismail, H. and Suryadiansyah. (2004). Effect of Filler Loading on Polypropylene/Natural Rubber/Recycle Rubber Powder (PP/NR/RRP) Blends, J. Reinforced Plastic & Composites, 23: 639—650.

Liu, L. , Qi, Z. and Zhu, X. (1999). Studies on Nylon 6/Clay Nanocomposites by Melt-Intercalation Process, J. Appl. Polym. Sci., 71: 1133—1138.

Ma, J. , Qi, Z. and Hu, Y. (2001). Synthesis and Characterization of Polypropylene/Clay Nanocomposites, J. Appl. Polym. Sci., 82: 3611—3617.

Usuki, A. , Koiwai, A. , Kojima, Y. , Kawasumi, M. , Okada, A. , Kurauchi, T. and Kamigaito, O. (1995). Interaction of Nylon 6-Clay Surface and Mechanical Properties of Nylon 6-Clay Hybrid, J. Appl. Polym. Sci., 55: 119—123.

Takeichi, T. and Guo, Y. (2003). Synthesis and Characterization of Poly(urethane-benzoxazine)/Clay Hybrid Nanocomposites, J. Appl. Polym. Sci., 90: 4075—4083.

Uhl, F.M. , Davuluri, S.P. , Wong, S.C. and Webster, D.C. (2004). Organically Modified Montmorillonite in UV Curable Urethane Acrylate Films, Polymer, 45: 6175—6187.

Lee, D.C. and Jang, L.W. (1996). Preparation and Characterization of PMMA—Clay Hybrid Composite by Emulsion Polymerization, J. Appl. Polym. Sci., 61: 1117—1122.

10.

Kojima, Y. , Usuki, A. , Kawasumi, M. , Okada, A. , Kurauchi T. and Kamigaito, O. (1993). Sorption of Water in Nylon 6-Clay Hybrid, J. Appl. Polym. Sci., 49: 1259—1264.

11.

Varghese, S. , Karger-Kocsis, J. and Gatos, K.G. (2003). Melt Compounded Epoxidized Natural Rubber/ Layered Silicate Nanocomposites: Structure-Properties Relationships, Polymer, 44: 3977—3983.

12.

Zanetti, M. , Camino, G. , Thomann, R. and Mulhaupt, R. (2001). Synthesis and Thermal Behaviour of Layered Silicate—EVA Nanocomposites, Polymer, 42: 4501—4507.

13.

Duquesne, S. , Jama, C. , Le Bras, M. , Delobel, R. , Recourt, P. and Gloaguen, J.M. (2003). Elaboration of EVA-nanoclay Systems-characterization, Thermal Behavior and Fire Performance, Composites Science and Technology, 63: 1141—1148.

14.

Liang Y. , Wang Y. , Wu Y. , Lu Y. , Zhang H. and Zhang L. (2005). Preparation and Properties of Isobutylene-Isoprene Rubber (IIR)/Clay Nanocomposites, Polymer Testing, 24: 12—17.

15.

Edenbaum, J. (1992). Plastic Additives and Modifiers Handbook, Van Nostrand Reinhold, New York.

16.

Kato, M. , Usuki, A. and Okada, A. (1997). Synthesis of Polypropylene Oligomer—clay Intercalation Compounds, J. Appl. Polym. Sci., 66: 1781—1785.

17.

Morgan, A.B. and Gilman, J.W. (2003). Characterization of Polymer-layered Silicate (Clay) Nanocomposites by Transmission Electron Microscopy and X-ray Diffraction: A Comparative Study, J. Appl. Polym. Sci., 87: 1329—1338.

18.

Li, X. and Ha, C.-S. (2003). Nanostructure of EVA/Organoclay Nanocomposites: Effects of Kinds of Organoclays and Grafting of Maleic Anhydride onto EVA , J. Appl. Polym. Sci., 87: 1901—1909.

19.

Suh, I.S. , Ryu, S.H. , Bae, J.H. and Chang, Y.W. (2004). Effects of Compatibilizer on the Layered Silicate/ Ethylene Vinyl Acetate Nanocomposite, J. Appl. Polym. Sci. , 94: 1057—1061.

20.

Usuki, A. , Kato, M. , Okada, A. and Kurauchi, T. (1997). Synthesis ofpolypropylene-Clay Hybrid, J. Appl. Polym. Sci., 63: 137—139.

21.

Pinnavaia T.J. and Beall G.W. (2001). Polymer-Clay Nanocomposites , John Wiley & Sons, Chicester .

22.

Zhang, W. , Chen, D. , Zhao Q. and Fang Y. ( 2003). Effects of Different Kinds of Clay and Different Vinyl Acetate Content on the Morphology and Properties of EVA/Clay Nanocomposites , Polymer, 44: 7953—7961.

23.

Svoboda, P. , Zeng, C. , Wang, H. , Lee L.J. and Tomasko, D.L. (2002). Morphology and Mechanical Properties of Polypropylene/Organoclay Nanocomposites, J. Appl. Polym. Sci., 85: 1562—1570.

24.

Hasegawa, N. , Kawasumi, M. , Kato, M. , Usuki, A. and Okada, A. (1998). Preparation and Mechanical Properties of Polypropylene—Clay Hybrids Using a Maleic Anhydride-modified Polypropylene Oligomer, J. Appl. Polym. Sci., 67: 87—92.

25.

Chow, W.S. , Mohd Ishak, Z.A. , Karger-Kocsis, J. , Apolostov, A.A. and Ishiaku, U.S. (2003). Compatibilizing Effect of Maleated Polypropylene on the Mechanical Properties and Morphology of Injection Molded Polyamide 6/Polypropylene/Organoclay Nanocomposites, Polymer, 44: 7427—7440.

26.

Chow, W.S. , Abu Bakar, A. , Mohd Ishak, Z.A. , Karger-Kocsis, J. and Ishiaku U.S. (2005). Effect of Maleic Anhydride-grafted Ethylene—Propylene Rubber on the Mechanical, Rheological and Morphological Properties of Organoclay Reinforced Polyamide 6/Polypropylene Nanocomposites, Eur. Polym. J., 41: 687—696.

27.

Mishra, J.K. , Ryou, J.H. , Kim, G.H. , Hwangm, K.J. , Kim, I. and Ha, C.S. (2004). Preparation and Properties of New Thermoplastic Vulcanizate(TPV)/Organoclay Nanocomposites Using Maleic Anhydride Functionalized Polypropylene as a Compatibilizer, Materials Letters, 58: 3481—3485.

28.

Challa, G. (1993). Polymer Chemistry an Introduction, Ellis Horwood, New York.