Assessing operational stability in condensed-mode fluidized bed reactor for linear low density polyethylene production: Insights from a thermoregulating water valve malfunction analysis

Abstract

The reliability of thermal regulation systems is crucial for ensuring the stability of condensed-mode gas-phase fluidized bed reactors (FBRs) used in the production of linear low-density polyethylene (LLDPE). However, studies reporting on the practical industrial control engineering of such reactors relying on thermal equilibrium mechanisms are scarce. This study presents a thorough analysis of a hot thermoregulating water (TRW) valve-jamming incident and interprets the related phenomena and parameter changes. The effect of the catalyst activity and variations in the liquid-phase quantities on the TRW valve action are investigated in depth, and a general explanation is provided by analyzing typical distributed control system data trends and proven deductive reasoning. Results indicate that the polymerization stability is maintained by two thermal pathways. The first pathway is related to the latent (condensate)/sensible heat (gas) extraction and polymerization heat of the materials, and the second is associated with the TRW system, specifically the cold and hot TRW branches. These pathways exhibited synergistic bidirectional effects. Finally, a series of innovative measures are proposed for internal and external operations to fully prevent and respond to TRW valve malfunctions and maintain overall polymerization stability. This study enhances the dependability of linear low-density polyethylene production through advanced process optimization utilizing the Unipol prototype and offers perspectives on system engineering for polyethylene production processes.

Keywords

Linear low-density polyethylene gas-phase fluidized bed reactor condensed mode thermal balance thermoregulating water

Get full access to this article

View all access options for this article.

References

Ronca

. Polyethylene. In: Gilbert

(ed). Brydson’s plastics materials. 8th ed. Butterworth-Heinemann, 2017, pp. 247–278, DOI: 10.1016/B978-0-323-35824-8.00010-4.

Chew

LaMarche

WCQ

Cocco

. 100 years of scaling up fluidized bed and circulating fluidized bed reactors. Powder Technol 2022; 409: 117813, DOI: 10.1016/j.powtec.2022.117813.

Sozzani

Bracco

Comotti

, et al. Stoichiometric compounds of magnesium dichloride with ethanol for the supported Ziegler−Natta catalysis: first recognition and multidimensional MAS NMR study. J Am Chem Soc 2003; 125: 12881–12893, DOI: 10.1021/ja034630n.

Liu

. Progress in the catalyst for ethylene/α-olefin copolymerization at high temperature. Can J Chem Eng 2023; 101: 4992–5019, DOI: 10.1002/cjce.24854.

Kumawat

Gupta

. Fundamental aspects of heterogeneous Ziegler–Natta olefin polymerization catalysis: an experimental and computational overview. Polym Chem 2020; 11: 6107–6128, DOI: 10.1039/D0PY00753F.

Namkajorn

Alizadeh

Somsook

, et al. Condensed-mode cooling for ethylene polymerization: the influence of inert condensing agent on the polymerization rate. Macro Chem Phy 2014; 215: 873–878, DOI: 10.1002/macp.201300757.

Alizadeh

Namkajorn

Somsook

, et al. Condensed mode cooling for ethylene polymerization: Part II. The effect of different condensable comonomers and hydrogen on polymerization rate. Macromol Chem Phys 2015; 216: 985–995, DOI: 10.1002/macp.201500023.

McKenna

TFL

. Condensed mode cooling of ethylene polymerization in fluidized bed reactors. Macromol React Eng 2019; 13: 1800026, DOI: 10.1002/mren.201800026.

Alizadeh

McKenna

TFL

. Condensed mode cooling for ethylene polymerization: the influence of the heat of sorption. Macromol React Eng 2014; 8: 419–433, DOI: 10.1002/mren.201300165.

10.

Touloupidis

. Catalytic olefin polymerization process modeling: multi-scale approach and modeling guidelines for micro-scale/kinetic modeling. Macromol React Eng 2014; 8: 508–527, DOI: 10.1002/mren.201300188.

11.

Shamiri

Hussain

Mjalli

, et al. Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor. Chem Eng J 2010; 161: 240–249, DOI: 10.1016/j.cej.2010.04.037.

12.

Zhang

Shao

Chen

, et al. Kinetic parameter estimation of HDPE slurry process from molecular weight distribution: estimability analysis and multistep methodology. AIChE J 2014; 60: 3442–3459, DOI: 10.1002/aic.14527.

13.

Luo

Z-H

Zheng

Cao

Z-K

, et al. Mathematical modeling of the molecular weight distribution of polypropylene produced in a loop reactor. Polym Eng Sci 2007; 47: 1643–1649, DOI: 10.1002/pen.20848.

14.

Knuuttila

Lehtinen

Nummila-Pakarinen

. Advanced polyethylene technologies—controlled material properties. In Albertsson

A-C

(ed), Long Term Prop Polyolefins. Berlin, Heidelberg: Springer, 2004, pp. 13–28, DOI: 10.1007/b13519.

15.

Kashani

Abedini

Kalaee

. Simulation of an industrial linear low density polyethylene plant. Chem Prod Process Model 2011; 6: 455, DOI: 10.2202/1934-2659.1611.

16.

Tian

Chen

K-R

Liu

B-P

, et al. Short-chain branching distribution oriented model development for Borstar bimodal polyethylene process and its correlation with product performance of slow crack growth. Chem Eng Sci 2015; 130: 41–55, DOI: 10.1016/j.ces.2015.03.001.

17.

Choi

Ray

. The dynamic behavior of continuous stirred-bed reactors for the solid catalyzed gas phase polymerization of propylene. Chem Eng Sci 1988; 43: 2587–2604, DOI: 10.1016/0009-2509(88)80003-4.

18.

Cesca

. The chemistry of unsaturated ethylene-propylene-based terpolymers. J Polym Sci Macromol Rev 1975; 10: 1–230, DOI: 10.1002/pol.1975.230100101.

19.

Haag

Zimnoch Dos Santos

Dupont

, et al. Dynamic simulation and experimental evaluation of EPDM synthesis with ET(IND)2ZRCL2/MAO catalyst system. J Appl Polym Sci 2000; 76: 425–438, DOI: 10.1002/(SICI)1097-4628(20000418)76:3<425::AID-APP18>3.0.CO;2-9.

20.

Ver Strate

Cozewith

. Near monodisperse ethylene-propylene copolymers by direct Ziegler-Natta polymerization. Preparation, characterization, properties. Macromolecules 1988; 21: 3360–3371, DOI: 10.1021/ma00190a004.

21.

Soares

JBP

Hamielec

. Deconvolution of chain-length distributions of linear polymers made by multiple-site-type catalysts. Polymer 1995; 36: 2257–2263, DOI: 10.1016/0032-3861(95)95305-K.

22.

Chen

Tian

Luo

, et al. Modeling and simulation of borstar bimodal polyethylene process based on a rigorous PC-SAFT equation of state model. Ind Eng Chem Res 2014; 53: 19905–19915.

23.

Liu

Sharma

. Ziegler–Natta polymerization: HDPE, PP, LLDPE, and EPDM, integrated process modeling, advanced control and data analytics for optimizing polyolefin Manufacturing. John Wiley & Sons, 2023, pp. 163–265, DOI: 10.1002/9783527843831.ch5.

24.

Reyes-Lúa

Skogestad

. Multi-input single-output control for extending the operating range: generalized split range control using the baton strategy. J Process Control 2020; 91: 1–11, DOI: 10.1016/j.jprocont.2020.05.001.

25.

Reyes-Lúa

Zotică

Forsman

, et al. Systematic design of split range controllers. IFAC-PapersOnLine 2019; 52: 898–903, DOI: 10.1016/j.ifacol.2019.06.176.26.

26.

Hong

Shou

Chen

, et al. A reinforcement learning-based temperature control of fluidized bed reactor in gas-phase polyethylene process. Comp Chem Eng 2024; 183: 108588, DOI: 10.1016/j.compchemeng.2024.108588.