The use of pine wood in wood-plastic composite WPC promotes sustainability by incorporating recycled or renewable materials, reducing the reliance on traditional wood sources, and minimizing environmental impact. This study focuses on treating pine wood flour (WF) with biological treatments (xylanase, pectinase, laccase, steam explosion) for use in WPC. The Scanning Electron Microscopy (SEM), Fourier Transform Infared spectroscopy (FTIR), biochemical analysis, and Thermo Gravimetric Analysis (TGA) were used to evaluate the effectiveness of the treatments in terms of the morphological, compositional, surface, and thermal stability of WF. The wear behavior of WPC was exanimate before and after hydrothermal aging. Morphological analysis of WF revealed that the enzymatic treatment produced a clean surface; it removed Xylan and led to a higher cellulose content (70%), and more porosity, and improved thermal stability and adhesion between WF and high density polyethylene (HDPE). Through analysis of wear and aging, we found the best wear resistance for laccase treatment among all WPC before and after aging, and it was lower than the HDPE. These findings highlight the positive impact of the enzymatic treatment on the adhesion between WF and HDPE, leading to reduced water absorption and increased wear resistance.
BledzkiAKSperberVEFarukO. Natural and wood fiber reinforcement in polymers. Shrewsbury: Rapra Technology, 2002. (Rapra review reports).
2.
FahimMChandN. Tribology of natural fiber polymer composites. Amsterdam: Elsevier, 2008.
3.
RamechMRajeshkumarLSalikalaG, et al.A critical review on wood-based polymer composites: Processing properties, and prospects. Polym2022; 14(3): 589.
4.
AurrekoetxeaJSarrionandiaMGomezX. Effects of microstructure on wear behaviour of wood reinforced polypropylene composite. Wear2008; 5(6): 606–611.
5.
JeamtrakullSKositchaiyongAMarkpinT, et al.Effect of wood constituents and content, and glass fiber reinforcement on wear behaviour of wood/WPC composites. Compos Part B: Eng2012; 43(7): 2721–2729.
6.
MohantyJRDasSNDasHC. Effect of Fiber Content on Abrasive Wear Behavior of Date Palm Leaf Reinforced Polyvinyl Pyrrolidone Composite. ISRN Tribol. 2014; 2014:1–10.
7.
WambuaPIvensJVerpoestI. Natural fibres: can they replace glass in fibre reinforced plastics. Compos Sci Technol. 2003;63(9):1259–1264.
8.
TserkiVZafeiropoulosNESimonF, et al.A study of the effect of acetylation and propionylation surface treatments on natural fibres. Compos Part A Appl Sci Manuf2005; 36(8):1110–1118.
9.
DemirHAtiklerUBalköseD, et al.The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene–luffa fiber composites. Compos Part Appl Sci Manuf2006; 37(3): 447–456.
10.
GobalYRamechM. Mechanical, wear, and hydrophobic properties of silane-treated corn husk fibre and betel nut epoxy composites. Biomass Conv and Bior2023.
11.
RojoEAlonsoMVOlietM, et al.Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites. Compos Part B Eng2015; 68: 185–192.
12.
AlixSPhilippeEBessadokA, et al.Effect of chemical treatments on water sorption and mechanical properties of flax fibres. Bioresour Technol. 2009; 100(20): 4742–4749.
13.
AzizSHAnsellMP. The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1–polyester resin matrix. Compos Sci Technol. 2004; 64(9): 1219–1230.
14.
KarthikeyanSRajiniNJawaidM, et al.A review on tribological properties of natural fiber based sustainable hybrid composite. Proc Inst Mech Eng Part J J Eng Tribol2017; 231(12): 1616–1634.
15.
SouissiSLachtarFElloumiA, et al.Properties of wood polymer composites based on polypropylene/olive wood flour: effects of fiber treatment and compatibilizer. Iran Poly Jour2022; 31: 1511–1521.
16.
HamdiMNEmanOTMonaAA, et al.Enhanced wooden polymer composites base on polyethylene and nano-modified wood flour. Egyp Jour Petr2022; 31: 39–45.
17.
AbrahamEDeepaBPothenLA, et al.Environmental friendly method for the extraction of coir fibre and isolation of nanofibre. Carbohydr Polym2013; 92(2): 1477–1483.
18.
AlyMHashmiMSJOlabiAG, et al.Optimization of Alkaline Treatment Conditions of Flax Fiber Using Box–Behnken Method. J Nat Fibers2012; 9(4): 256–276.
19.
ChenZHuTQJangHF, et al.Modification of xylan in alkaline treated bleached hardwood kraft pulps as classified by attenuated total-internal-reflection (ATR) FTIR spectroscopy. Carbohydr Polym2015; 127: 418–426.
20.
DwivediUKChandN. Influence of MA-g-PP on abrasive wear behaviour of chopped sisal fibre reinforced polypropylene composites. J Mater Process Technol2009;2 09(12–13):5371–5375.
21.
MansouriABen NasrJBen AmarM, et al.Characterization of fiber extracted from Agave Americana after Burial in Soil. Fibers Polym2020; 21(4):724–732.
22.
AkinDEFoulkJADoddRB, et al.Enzyme-retting of flax and characterization of processed fibers. J Biotechnol2001; 89(2):193–203.
23.
BledzkiAKMamunAAJaszkiewiczA, et al.Polypropylene composites with enzyme modified abaca fibre. Compos Sci Technol2010; 70(5): 854–860.
24.
WongLYSaadWZMohamadR, et al.Optimization of cultural conditions for polygalacturonase production by a newly isolated Aspergillus fumigatus R6 capable of retting kenaf. Ind Crops Prod2017; 97:175–183.
25.
HananaSElloumiAPlacetV, et al.An efficient enzymatic-based process for the extraction of high-mechanical properties alfa fibres. Ind Crops Prod2015; 70: 190–200.
26.
WerchefaniMLacosteCElloumiA, et al.Enzyme-treated Tunisian Alfa fibers reinforced polylactic acid composites: an investigation in morphological, thermal, mechanical, and water resistance properties. Polym Compos2020; 41(5):1721–1735.
27.
ChaariRKhlifMMallekH, et al.Enzymatic treatements effect on the poly (butylene succinate/date palm fibers properties for bio-composite applications. Ind Crops Prod2020; 148: 112270.
28.
LiXQiangMYangM, et al.Combining fiber enzymatic prettreatments and coupling agents to improve physical and mechanical properties of hump hurd/wood/polypropylene composite. Materials2021; 14(21) 6384.
29.
MartinEBadelELégerSet al.Effect of laccase pre-treatement on the mechanical properties of lignin-based agrocomposites reinforced with wood fibers. Ind Crops Prod2022; 189: 115876.
30.
YoussefAMHasaninMSAbd El AzizME, et al.Green, economic, and partially biodegradable wood plastic composites via enzymatic surface modification of lignocellulosic fibers. Heli2019; 5(3): E01332.
31.
Hadj-TaiebNAyadiMTriguiS, et al.Hyperproduction of pectinase activities by a fully constitutive mutant (CT1) of Penicillium occitanis. Enzyme Microb Technol2002; 30(5): 662–666.
32.
BuswellJACaiYChangS. Effect of nutrient nitrogen and manganese on manganese peroxidase and laccase production by Lentinula (Lentinus) edodes. FEMS Microbiol Lett1995; 128(1): 81–87.
33.
PopescuM-CFroidevauxJNaviP, et al.Structural modifications of Tilia cordata wood during heat treatment investigated by FT-IR and 2D IR correlation spectroscopy. J Mol Struct2013; 1033: 176–186.
34.
SchwanningerMRodriguesJPereiraH, et al.Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose. Vib Spectrosc2004; 36(1): 23–40.
35.
MüllerURätzschMSchwanningerM, et al.Yellowing and IR-changes of spruce wood as result of UV-irradiation. J Photochem Photobiol B2003; 69(2): 97–105.
36.
CuiYLeeSNoruziaanB, et al.Fabrication and interfacial modification of wood/recycled plastic composite materials. Compos Part Appl Sci Manuf. 2008; 39(4): 655–661.
37.
BodîrlăuRTeacăCASpiridonI. Thermal investigation upon various composite materials. Rev Roum Chim2007; 52(1–2): 153–158.
38.
ChenYTshabalalaMGaoJ, et al.Thermal behaviour of extracted and delignified pine wood flour. Therm Chim Act2014; 591: 40–44.
39.
GeorgeMMussonePAlemaskinK, et al.Enzymatically treated natural fibers as reinforcing agents for biocomposite material: mechanical, thermal, and moisture absorption characterization. J Mater Sci2015; 51(5): 2677–2686.
GuermaziNHaddarNElleuchK, et al.Effect of filler addition and weathering conditions on the performance of PVC/CaCO 3 composites. Polym Compos2016; 37(7): 2171–2183.
42.
JeamtrakullSKositchaiyongAMarkpinT, et al.Effects of wood constituents and content, and glass fiber reinforcement on wear behavior of wood/PVC composites. Compos Part B Eng2012; 43(7):2721–2729.
43.
GuermaziNHaddarNElleuchK, et al.Investigations on the fabrication and the characterization of glass/epoxy, carbon/epoxy and hybrid composites used in the reinforcement and the repair of aeronautic structures. Mater Des 1980-20152014; 56: 714–724.
