Abstract
The effects of graft copolymers applied as compatibilizers for natural rubber/nitrile rubber (NR/NBR) blends at 50/50 (w/w) on cure characteristics, mechanical properties, thermal properties, oil resistance, and morphology were investigated. The graft copolymers of methyl methacrylate (MMA) onto NR initiated by benzoyl peroxide (NR-g-PMMA<BPO>) and by potassium persulfate (NR-g-PMMA<PPS>) under emulsion polymerization were synthesized and used to compatibilize the blends. The structures of the copolymers were characterized by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. NR was blended with NBR via a two-roll mill at 70°C under the compatibilizer loading ranging from 0 to 10 parts per hundred of rubber (phr). The results showed that the tensile property and tear strength of the blends increased with the increasing amount of NR-g-PMMA<BPO> as a compatibilizer. Thermal aging determined in terms of tensile properties exhibited the smaller difference between before and after aging in an oven with the increasing compatibilizer loading. The morphology of the compatibilized NR/NBR vulcanizates was investigated by scanning electron microscopy of the tensile fracture surfaces, which exhibited the improvement of interfacial adhesion between the two rubber phases. The thermal properties of compatibilized NR/NBR vulcanizates were reported in terms of a glass transition temperature under differential scanning calorimetry and dynamic mechanical analysis. The incorporation of an appropriate amount of the compatibilizer into the blends apparently improved the oil resistance of NR. Among them, the blend filled with 7.5 phr of NR-g-PMMA<BPO> showed the lowest volume change in IRM 903 oil.
Get full access to this article
View all access options for this article.