Polyamide12 (Nylon12)/natural rubber (NR) blend was prepared by melt mixing in a Brabender mixer using polystyrene/maleated natural rubber (PS/MNR) copolymer as a reactive compatibilizer. The influence of compatibilizer loading (1, 3, 5, 7, and 10 phr), shear rate (10–500 s−1), and temperature (200–220°C) on the flow properties (i.e., shear viscosity (η), power law index, flow activation energy (Ea), and extrudate swell) of (Nylon12/NR)/(PS/MNR) blends was investigated. The blends showed pseudoplastic behavior from an evident increase of shear stress and a reduction of η with increasing shear rate. The values of η and Ea of the blends were also found to increase with the compatibilizer loading. It suggests that PS/MNR copolymer functioned properly and enhanced the compatibility and interfacial interaction between Nylon12 matrix and NR domains via the formation of amide and succinimide linkages at the interfaces. This reactive compatibilization also caused in a reduction of extrudate swell apparently due to slower elastic recovery of polymer chains.
LaiSMLiaoYCChenTW. The preparation and properties of compatibilized nylon 6/ABS blends using functionalized polybutadiene. Part I: impact properties. Polym Eng Sci2005; 45: 1461–1470.
6.
Mohammadian-GezazSGhasemiIOromiehieA. Study of the properties of compatibilized ABS/PA6 blends using response surface methodology. J Vinyl Addit Technol2009; 15: 191–198.
7.
BoseSBhattacharyyaARKodgirePV. Fractionated crystallization in PA6/ABS blends: influence of a reactive compatibilizer and multiwall carbon nanotubes. Polymer2007; 48: 356–362.
8.
KudvaRAKeskkulaHPaulDR. Fracture behavior of nylon6/ABS blends compatibilized with an imidized acrylic polymer. Polymer2000; 41: 335–349.
9.
AraújoEMHageECarvalhoAJF. Acrylonitrile–butadiene–styrene toughened nylon6: the influences of compatibilizer on morphology and impact properties. J Appl Polym Sci2003; 87: 842–847.
10.
KumarCRNairSVGeorgeKE. Blends of nylon/acrylonitrile butadiene rubber: effects of blend ratio, dynamic vulcanization and reactive compatibilization on rheology and extrudate morphology. Polym Eng Sci2003; 43: 1555–1565.
11.
IshakaZAMChowaWSTakeichiT. Influence of SEBS-g-MA on morphology, mechanical, and thermal properties of PA6/PP/organoclay nanocomposites. Eur Polym J2008; 44: 1023–1039.
12.
AgrawalPRodriguesAWBAraújoE. Influence of reactive compatibilizers on the rheometrical and mechanical properties of PA6/LDPE and PA6/HDPE blends. J Mater Sci2010; 45: 496–502.
13.
MarcoCEllisGGómezMA. Rheological properties, crystallization, and morphology of compatibilized blends of isotactic polypropylene and polyamide. J Appl Polym Sci1997; 65: 2665–2677.
14.
OlagokeOKolapoA. Handbook of thermoplastics. New York: CRC Press, 1997.
15.
UtrackiLA. Compatibilization of polymer blends. Can J Chem Eng2002; 80: 1008–1016.
16.
Holsti-MiettinenRMSeppäläJVIkkalaOT. Functionalized elastomeric compatibilizer in PA 6/PP blends and binary interactions between compatibilizer and polymer. Polym Eng Sci1994; 34: 395–404.
17.
MinkovaLYordanovHFilippiS. Interfacial tension of compatibilized blends of LDPE and PA6: the breaking thread method. Polymer2003; 44: 7925–7932.
18.
KimJPalK. Effect of compatibilizers in WPC composites. Recent advances in the processing of wood–plastic composites. Springer-Verlag Berlin Heidelberg, 2011, pp. 103–127.
19.
MasciaL. Polymers in industry from A to Z: a concise encyclopedia. Weinheim: Wiley-VCH Verlag GmbH & Co. KGaA, 2011.
20.
EbeweleRO. Polymer science and technology. Boca Raton: CRC Press, 2010.
21.
CogswellFN. Polymer melt rheology – a guide for industrial practice. Cambridge: Woodhead Publishing Limited, 1982.
22.
MeisterJJ. Polymer modification: principles, techniques, and applications. New York: CRC Press, 2000.
XieBHYangMBLiSD. Studies on polyamide-6/polyolefin blend system compatibilized with epoxidized natural rubber. J Appl Polym Sci2003; 88: 398–403.
25.
LievanaEKarger-KocsisJ. Impact modification of PA-6 and PBT by epoxy-functionalized rubbers. Macromol Symp2003; 202: 59–66.
26.
JhaADuttaBBhowmickAK. Effect of fillers and plasticizers on the performance of novel heat and oil-resistant thermoplastic elastomers from nylon-6 and acrylate rubber blends. J Appl Polym Sci1999; 74: 1490–1501.
27.
JhaABhowmickAK. Influence of dynamic vulcanization and phase interaction on the swelling behavior of the thermoplastic elastomeric blends of nylon-6 and acrylate rubber in various solvents and oil. J Appl Polym Sci1998; 69: 2331–2340.
28.
JhaABhowmickAK. Thermoplastic elastomeric blends of nylon-6/acrylate rubber: influence of interaction on mechanical and dynamic mechanical thermal properties. Rubber Chem Technol1997; 70: 798–814.
29.
MuksingNNithitanakulMGradyBP. Melt rheology and extrudate swell of organobentonite-filled polypropylene nanocomposites. Polym Test2008; 27: 470–479.
30.
NakasonCKaesamanASamohZ. Rheological properties of maleated natural rubber and natural rubber blends. Polym Test2002; 21: 449–455.
31.
SaedanMNavaratTSombatA. Grafting of maleic anhydride on natural rubber molecules in a molten state. Bangkok: The National Research Council of Thailand, 1997.
32.
Van PuyveldePOommenZKoetsP. Effect of reactive compatibilization on the interfacial slip in nylon-6/EPR blends. Polym Eng Sci2003; 43: 71–77.
