Sage Journals: Discover world-class research

Abstract

Polymer composites containing nanofillers are among the most promising research fields for advanced materials. Carbon nanotubes (CNTs) are considered an ideal inclusion for polymer nanocomposites due to superior electrical, thermal, and mechanical properties which can be explained with the unique atomic structure of the nanotubes. Multi-walled carbon nanotubes (MWCNTs) are used as extremely strong nano-reinforcements for composites to produce a new generation of fiber-reinforced plastics with better application properties. In this experimental study, PP/MWCNT polymer nanocomposites with nanofiller concentrations in the range of 0.05–1 wt% MWCNT and the maleic anhydride amount from 0 to 7.5 wt% were investigated. An experimental study is conducted to examine the influence of MWCNT and compatibilizer contents on the thermal, mechanical, and viscoelastic properties of polypropylene (PP)/MWCNT nanocomposites. Extruded samples are characterized by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and microindentation tests. Standard Berkovich indentation test determined by residual surface impression method based on load–displacement curves was used. DSC results show an increase in the crystallization temperature of maleinated PP with the increase of MWCNT contents proving the nucleation effect of CNTs. DMTA results prove the good modification properties of maleic anhydride in MWCNT/PP nanocomposites at 0.05 wt% nanotubes concentration. Elastic moduli, obtained from both DMTA and microindentation, are compared to investigate the difference between surface and bulk mechanical properties of nanocomposites with increasing nanotubes concentration. Measured values of elastic moduli are within comparable ranges, but the absolute values are different.

Keywords

Polypropylene MWCNT nanocomposites maleic anhydride DSC DMTA

Get full access to this article

View all access options for this article.

References

Iijima

. Helical microtubules of graphitic carbon. Nature 1991; 354(6348): 56–58.

Iijima

Ichihashi

. Single-shell carbon nanotubes of 1- nm diameter. Nature 1993; 363(6430): 603–605.

Kotsilkova

Milosheva

Ivanov

. Polymer nanocomposites for structural applications. Design, synthesis and characterization. In: Proceedings of XXth Congress of Chemists and Technologists of Macedonia, 17–20 September, Ohrid, Macedonia, 2008.

Szentes

Horvath

Varga

. Mechanical properties of polypropylene/multi walled carbon nanotube composites. Hung J Ind Chem 2010; 38(1): 67–70

Fereidoon

Zamani

Sabet

Dolati

. Experimental investigation on multi-wall carbon, nanotube/polypropylene nanocomposite under high and low velocity impact, 2011. In: International Conference on Nanotechnology and Biosensors, IPCBEE, Vol. 25, 28–30 December 2011, Dubai, Singapore: IACSIT Press, pp. 49–53.

Prashantha

Soulestin

Lacrampe

. Multi-walled carbon nanotube filled polypropylene nanocomposites based on masterbatch route: improvement of dispersion and mechanical properties through PP-g-MA addition. Express Polym Lett 2008; 2(10): 735–745.

Kotsilkova

Ivanov

Krusteva

. Ecosustainable polymer nanomaterials for food packaging. In: Silvestre

Cimmino

(eds) Evolution of Rheology, Structure and Properties around the Rheological Flocculation and Percolation Thresholds in Polymer Nanocomposites. Tailor & Francis Books, LLC, Boca Raton FL, 2013, pp. 55–86.

Abbasi

Derdouri

Carreau

. Effect of crystalline structure on morphology and properties of MWCNT nanocomposites. In: 67th Annual Technical Conference of the Society of Plastics Engineers, 22–24 June 2009, Chicago, Illinois, Publ: Curran Associates, Inc. 2009, pp. 552–556.

Kotsilkova

Ivanov

Krusteva

. Isotactic polypropylene composites reinforced with multiwall carbon nanotubes. Part 2. Thermal and mechanical properties related to the structure. J Appl Polym 2010; 115: 3576–3585.

10.

Teng

CCM

Huang

Y-W

. Effect of MWCNT contents on rheological and dynamic mechanical properties of multiwalled carbon nanotube/polypropylene composites. Compos A 2008; 39: 1869–1875.

11.

Logakis

Pollatos

Pandis

. Structure–property relationships in isotactic polypropylene/multi-walled carbon nanotubes nanocomposites. Compos Sci Technol 2010; 70: 328–335.

12.

Chen

Zhou

. Preparation and crystallization of carbon nanotube/maleic anhydride-grafted polypropylene composites. J Mater Sci Technol 2008; 24(2): 279–284.

13.

Ivanov

Krusteva

Djoumalijsky

. Effect of processing on rheology and structure of polypropylene/carbon nanotube composites. Nanosci Nanotechnol 2008; 8: 89–92.

14.

Ivanov

Krusteva

Kotsilkova

. Rheology of maleinated iPP/MWCNT composites. In Proceedings of 12th Int. Conference on MTCM, 22–24 September 2009, Varna, Bulgaria, 2009, pp. 319–324.

15.

Abbasi

Derdouri

Carreau

. Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. Polym Eng Sci 2011; 51(5): 992–1003.

16.

Lee

Kim

SHo

. Rheological and electrical properties of polypropylene/MWCNT composites prepared with MWCNT masterbatch chips. Eur Polym J 2008; 44: 1620–1630.

17.

Silvestre

Duraccio

Cimmino

. Food packaging based on polymer nanomaterials. Prog Polym Sci 2011; 36(12): 1766–1782.

18.

Cordeiro de Azeredo

Capparelli Mattoso

McHugh

. In: Reddy

(ed.) Advances in Diverse Industrial Applications of Nanocomposites, Chapter 4: Nanocomposites in Food Packaging– A Review. Rijeka: InTech, 2011, pp. 57–78.

19.

Robinson

DKR

Morrison

MJ.

Nanotechnology Developments for the Agrifood Sector. Report for the ObservatoryNANO, 2009. Available at: May 2009, www.observatorynano.eu

20.

Sekhon

. Food nanotechnology – an overview. Nanotechnol Sci Appl 2010; 3: 1–15.

21.

Cioffi

Rai

Nano-Antimicrobials, Progress and Prospects. Heidelberg: Springer-Verlag, 2012.

22.

Isasi

Mandelkern

Galante

. The degree of crystallinity of isotactic poly(propylene). J Polym Sci Polym Phys 1999; 37: 323–334.

23.

Sánchez

Rams

Campo

. Characterization of carbon nanofiber/epoxy nanocomposites by the nanoindentation technique. Compos B Eng 2011; 42(4): 638–644.

24.

Zhu

Zhang

Huang

. Modification of PP/HDPE blends by PP-PE sequential polymerization product. J Appl Polym Sci 1995; 58: 515–521.

25.

Tranchida

Piccarolo

Loos

. Mechanical characterization of polymers on nanometre scale through nanoindentation. A study on pile-up and viscoelasticity. Macromolecules 2007; 40: 1259–1267.

26.

Ivanov

Kotsilkova

Krusteva

. Effect of maleic anhydride on the rheological, mechanical and thermal properties of polypropylene/multiwall carbon nanotube composites. Nanosci & Nanotechnol 2010; 10: 34–37.

Thermal,mechanical and viscoelastic properties of compatibilized polypropylene/multi-walled carbon nanotube nanocomposites

Abstract

Keywords

Get full access to this article

References