Nondestructive assessment of pore size in foam-based hybrid composite material

Abstract

In situ nondestructive evaluation (NDE) during processing of high-temperature polymer-based hybrids offers great potential to gain close control of and achieve the desired level of pore size, with low overall development cost. During the polymer-curing cycle, close control over the evolution of volatiles would be beneficial to avoid the presence of pores or control of their sizes. Traditional NDE methods cannot realistically be expected to evaluate individual pores in such components as each pore evolves and grows during curing. However, NDE techniques offer the potential to detect and quantify the macroscopic response of many pores that are undesirable or intentionally introduced into these advanced materials. In this article, preliminary results will be presented for nondestructive assessment of pore size in foam-based hybrid composite materials using ultrasonic techniques. The ultrasonic method was chosen due to its high sensitivity to the change of composition in material, ability to provide the required depth of penetration and ability to provide the needed modulus information for the cured material through appropriate velocity measurements. Pore size was evaluated through the frequency content of ultrasonic signal. The effects of pore size on the attenuation of ultrasound were studied. Feasibility of this method was demonstrated on two types of foams with various pore sizes.

Keywords

foam pore size nondestructive ultrasonic

Get full access to this article

View all access options for this article.

References

Sayers

. Ultrasonic velocity dispersion in porous materials. J Phys D: Appl Phys 1981; 14: 413–420.

Roth

Kiser

Swichard

, Szatmary SA and Kerwin DP Quantitative mapping of pore fraction variations in silicon nitride using an ultrasonic contact scan technique. Res Nondestr Eva 1995; 6: 125–168.

Biot

. Theory of propagation of elastic waves in a fluid-saturated porous solid, I. Low frequency range. J Acoust Soc Am 1956; 28: 168–178.

Biot

. Theory of propagation of elastic waves in a fluid-saturated porous solid, II. Higher frequency range. J Acoust Soc Am 1956; 28: 179–191.

Berryman

. Confirmation of Biot’s theory. Apply Phys Lett 1980; 37: 382–384.

Johnson

Plona

. Acoustic slow waves and the consolidation transition. J Acoust Soc Am 1982; 72: 556–565.

Nagy

Adler

. Slow wave propagation in air-filled porous materials and natural rocks. Appl Phys Lett 1990; 56: 2504–2506.

Filipow

Jackson

. Ultrasonic wave propagation in water-saturated aluminum foams. Ultrasonics 1998; 36: 759–765.

The photo showing the definition of pore size and cell was from the web site at http://www.ergaerospace.com/ (Permission to use the photo and web link was granted on August, 18, 2010).