Acrylonitrile butadiene rubber (NBR) has been used as a compatibilizer for natural rubber—poly (ethylene-co-vinyl acetate) (NR—EVA) blends, vulcanized by sulfur. A significant reduction in solvent uptake is observed for compatibilized samples. This has been explained in terms of the increased interfacial adhesion between NR and EVA components of the blends in the presence of the compatibilizer. The threshold compatibilizer loading has been found to be 6 phr. The observed sorption features have been complemented by the evaluation of the surface morphology and mechanical properties of the blends. The kinetics of transport process through the compatibilized blends has also been discussed.
Eastwood, E. , Viswanathan, S., O'Brien, C.P., Kumar, D. and Dadmun, M.D. (2005). Methods to Improve the Properties of Polymer Mixtures: Optimising Intermolecular Interactions and Compatibilization, Polymer, 46(12): 3957—3970.
2.
Pionteck, J. , Sadhu, V.B., Jakisch, L., Potschke, P., Haussler, L. and Janke, A. (2005). Crosslinkable Coupling Agents: Synthesis and Use for Modification of Interfaces in Polymer Blends , Polymer , 46(17): 6563—6574.
3.
Hong, S., Gil, Y.S., Hwang, S.S. and Hong, S.M. (2004). Effect of Poly (esterimide)s as Compatibilizers on the Physical Properties of Poly (etherimide)/Thermotropic Liquid Crystalline Polymer in-situ Composites, Polym. J., 36(4): 271—283.
4.
Wu, J. (2003). The Interfacial Properties and Porous Structures of Polymer Blends Characterized by Synchrotran Small Angle X-Ray Scattering , Polymer, 44(26): 8033—8043.
5.
Mathew, M. and Thomas, S. (2003). Compatibilization of Heterogeneous Acrylonitrile Butadiene Rubber/Polystyrene Blends by the Addition of Styrene Acrylonitrile Copolymer: Effect on Morphology and Mechanical Properties, Polymer, 44(4): 1295—1307.
6.
Cabanelas, J.C. , Serrano, B., Gonzalez , M.G. and Baselga. (2005). Confocal Microscopy Study of Phase Morphology Evolution in Epoxy/Polysiloxane Thermosets, Polymer , 46(17): 6633—6639.
7.
Martin, P., Gallez, C., Devaux, J., Legras, R., Leemans, L., van Gurp, M. and van Duin, M. (2003). Reactive Compatibilization of Blends of Polybutyleneterephtalate with Epoxide Containing Rubber. The Effect of the Concentrations in Reactive Functions, Polymer, 44(18): 5251—5262.
8.
Fayt, R. and Teyssie, P. (1990). Molecular Design of Multicomponent Polymer Systems XVIII: Emulsification of High Impact Polystyrene and Low Density Polyethylene Blends into High Impact Alloys, Polym. Eng. Sci., 30(16): 937—943.
9.
Ravikumar, H.B. and Ranganathaiah , C. (2005). Compatibilizer-Induced Microstructural Changes in Poly (trimethylene terephthalate)/EPDM Blends Studied by the Positron Annihilation Life Time Technique and Differential Scanning Calorimetry, Polym. Int., 54(9): 1288—1295.
10.
Yeh, J.T. , Fan-Chiang, C.C. and Yang, S.S. (1997). Effects of Composition of Modefied Polyamide on Barrier Properties of Polyethylene/Modefied Polyamide Blends, J. Appl. Polym. Sci., 64(8): 1531—1540.
11.
Nunez, R.G. , Padilla, H., DeKee , D. and Favis, B.D. (2001). Barrier Properties of Polyamide-6/High Density Polyethylene Blends, Polym. Bull. , 46(4): 323—330.
12.
Sujith, A., Radhakrishnan, C.K., Unnikrishnan, G. and Thomas, S. (2003). Mass Transfer Characteristics of Natural Rubber/Ethylene Vinyl Acetate Blends, J. Appl. Polym. Sci., 90(10): 2691—2702.
13.
Sujith, A. and Unnikrishnan, G. (2005). Barrier Properties of Natural Rubber/Ethylene Vinyl Acetate/Carbon Black Composites, J. Mat. Sci., 40(17): 4625—4640.
14.
Sujith, A. and Unnikrishnan, G. (2006). Molecular Sorption by Heterogeneous Natural Rubber/Poly (ethylene-co-vinyl acetate) Blend Systems , J. Polymer Research, 13(3): 171—180.
15.
George, S.C. and Varughese, K.T. (2000). Molecular Transport of Aromatic Solvents in Isotactic Polypropylene/Acrylonitrile-co-Butadiene Rubber Blends, Polymer , 41(2): 579—594.
16.
Franson, M. and Peppas, N.A. (1983). Influence of Copolymer Composition on Non-Fickian Water Transport through Glassy Polymers, J. Appl. Polym. Sci. , 28(4): 1299—1310.
17.
Harogoppad, S.M. and Aminabhavi , T.M. (1991). Diffusion and Sorption of Organic Liquids through Polymer Membranes. II. Neoprene, SBR, EPDM, NBR and Natural Rubber versus n-Alkanes, J. Appl. Polym. Sci. , 42(8): 2329—2336.
18.
Moon, Y.D. and Lee, Y.M. (1994). Dynamics of Solvent Diffusion in an Aromatic Polyimide , J. Appl. Polym. Sci., 51(5): 945—954.
19.
Elwy, A., Badwy, M.M. and Nasr, G.M. (1996). Electrical Properties and Penetration Rate of Solvent into Irradiated LDPE/SBR Conductive Blend, Polym. Degrad. Stab., 53(3): 289—294.
20.
Kumnuantip, C. and Sombatsompop. (2003). Dynamic Mechanical Properties and Swelling Behaviour of NR/Reclaimed Rubber Blends , Mater. Lett., 57(21): 3167—3174.
21.
Varghese, H. , Bhagawan, S.S. and Thomas, S. (1999). Effects of Blend Ratio, Crossslinking Systems and Fillers on the Morphology, Curing Behaviour, Mechanical properties and Failure Mode of Acrylonitrile Butadiene Rubber and Poly (ethylene-co-vinyl acetate) Blends, J. Appl. Polym. Sci., 71(14): 2335—2364.
22.
Spiros, H.A. , Irena, G. and Koberstein, J.T. (1989). Compatibilizing Effect of Block Copolymers Added to the Polymer/Polymer Interface , Macromolecules,22(3): 1449—1453.
23.
Thomas, S. and Praud'homme, R.E. (1992). Compatibilizing Effect of Block Copolymers in Heterogeneous Polystyrene/Poly (methyl methaacrylate) Blends, Polymer, 33(20): 4260—4268.
24.
Aminabhavi, T.M., Phayde, H.T.S., Ortego, J.D. and Rudzinski , W.E. (1996). Molecular Migration of Hazardous Liquids into Thermoplastic EthylenePropylene Random Copolymer and Isotactic Polypropylene Membranes, J. Hazard. Mater., 49(2—3): 125—141.
25.
Crank, J. (1975). The Mathematics of Diffusion, Clarendon Press, Oxford.
26.
Brown, W.R. , Jenkins, R.B. and Park, G.S. (1973). The Sorption and Diffusion of Small Molecules in Amorphous and Crystalline Poly Butadienes, J. Polym. Sci. Polym. Symp., 41: 45—54.
27.
Lucht, L.M. and Peppas, N.A. (1987). Transport of Penetrants in the Macromolecular Structure of Coals. V. Anomalous Transport in Pretreated Coal Particles, J. Appl. Polym. Sci., 33(5): 1557—1566.
