In air filtration, nonwoven materials are known to be pertinent structures for fine filtration and moderate pressure drop. In order to develop a filter that combines good permeability and high efficiency, it is important to identify the relevant structural parameters of the nonwoven. The main criteria studied in this paper are fiber fineness, solid volume fraction and basis length (total length of fiber in unit area of nonwoven). The effect of combining different fiber diameters in order to reach the best compromise is also investigated. Our results show that the use of binary blends of different fiber diameters improves overall filtration behavior, in comparison to nonwoven filters with equivalent unimodal diameter distribution. A theoretical filtration model is used to predict filtration behavior for different structural characteristics and these predictions are compared to experimental results. However, this comparison demonstrates the limits of existing models in the case of fiber blends.
SutherlandK. Profile of the international filtration & separation industry: Market prospects to 2009. Oxford: Elsevier, 2005.
2.
GregorE. Primer on nonwoven fabric filtration media, http://www.egregor.com (2003), Accessed: February 2011.
3.
LambGCostanzaPA. Influences of fiber geometry on the performance of nonwoven air filters. Part II: Fiber diameter and crimp frequency. Text Res J1979; 49: 79–87.
4.
SongCBParkHS. Analytic solutions for filtration of polydisperse aerosols in fibrous filter. Powder Technol2006; 170: 64–70.
5.
SteffensJCouryJR. Collection efficiency of fiber filters operating on the removal of nano-sized aerosol particles: I-Homogeneous fibers. Sep Purif Technol2007; 58: 99–105.
6.
LambGCostanzaPA. Influences of fiber geometry on the performance of nonwoven air filters. Text Res J1975; 45: 452–463.
7.
LambGCostanzaPA. Influences of fiber geometry on the performance of nonwoven air filters: Part III: cross-sectional shape. Text Res J1980; 50: 362–370.
8.
ZhuCLinCHCheungCS. Inertial impaction-dominated fibrous filtration with rectangular or cylindrical fibers. Powder Technol2000; 112: 149–162.
9.
CiachTGradonL. Multilayer fibrous filters with varied porosity and fiber diameter. J Aerosol Sci1998; 29: 935–936.
10.
LisowskiAJankowskaEThorpeA. Performance of textile fiber filter material measured with monodisperse and standard aerosols. Powder Technol2001; 118: 149–159.
11.
HeldmannC. Air filtration composite structures with superior filtration efficiency and optimised low pressure drop using finest meltblown and staple fibers. In proceedings of Filtrex08, Köln, Germany, 2008.
12.
RupertsederW. Improved filter efficiency through integrated nanofibers. In proceedings of Filtrex08, Köln, Germany, 2008.
13.
KrucinskaI. The influence of technological parameters on the filtration efficiency of electret needled non-woven fabrics. J Electrost2002; 56: 143–153.
14.
ZobelSMazeBVahedi TafreshiH. Simulating permeability of 3-D calendered fibrous structures. Chem Eng Sci2007; 62: 6285–6296.
15.
RaynorPCLeithD. The influence of accumulated liquid on fibrous filter performance. J Aerosol Sci2000; 31: 19–34.
16.
ContalPSimaoJThomasD. Clogging of fiber filters by submicron droplets. Phenomena and influence of operating conditions. Aerosol Sci2004; 35: 263–278.
17.
ThomasDPenicotPContalP. Clogging of fibrous filter by solid aerosol particles: experimental and modelling study. Chem Eng Sci2001; 56: 3549–3561.
18.
HuangSHChenCWChangCP. Penetration of 4.5 nm to 10 µm aerosol particles through fibrous filters. Aerosol Sci2007; 38: 719–727.
19.
BarrettLWRousseauAD. Aerosol loading performance of electret filter media. Am Ind Hyg Assoc J1998; 59: 532–539.
20.
21.
KimJJasperWHinestrozaJ. Direct probing of solvent-induced charge degradation in polypropylene electret fibres via electrostatic force microscopy. J Microsc2007; 225: 72–79.
22.
SmithPAEastGCBrownRC. Generation of triboelectric charge in textile fibre mixtures, and their use as air filters. J Electrostat1988; 21: 81–98.
23.
KuwabaraS. The forces experienced by randomly distributed parallel circular cylinders or spheres in a viscous flow at small Reynolds numbers. J Phys Soc Jpn1959; 14: 527–532.
24.
LeeKWLiuBYH. Theoretical study of aerosol filtration by fibrous filters. Aerosol Sci Tec1982; 1: 147–161.
25.
DaviesCN. Filtration of aerosols. J Aerosol Sci1983; 14: 147–161.
26.
ThomasDContalPRenaudinV. Modeling pressure drop in HEPA filters during dynamic filtration. J. Aerosol Sci1999; 30: 235–246.
27.
BrownRC. Air filtration. London: Pergamon Press, 1993.
28.
29.
LiuBYHRubowKL. Efficiency, pressure drop and figure of merit of high efficiency fibrous and membrane filter media. In proceedings of 5th world filtration conference, Nice, France, 1990.
30.
31.
ChenXVromanPLewandowskiM. Study of the influence of fiber morphology on liquid diffusion within nonwoven structures: effect of fiber diameter. Text Res J2009; 79: 1364–1370.
32.
SakanoTOtaniYNamikiN. Particle collection of medium performance air filters consisting of binary fibers under dust loaded conditions. Sep Purif Technol2000; 19: 145–152.
JaganathanSVahedi TafreshiHPourdeyhimiB. On the pressure drop prediction of filter media composed of fibers with bimodal diameter distribution. Powder Technol2008; 181: 89–95.
35.
FrisingTThomasDContalP. Influence of filter fiber size distribution on filter efficiency calculations. Chem Eng Res Des2003; 81: 1179–1184.
