This paper presents a method for modelling the seam puckering of multi-layer fabrics by considering the thread shrinkage as well as seam structure and fabric compression properties. A theoretical investigation and numerical calculation of forces acting on the sewing thread were carried out. Based on this, the forces causing the thread tension puckering were analyzed and a seam model to calculate the deformation of a multi-layer seam when threads shrink is presented. Three types of seams were simulated and satisfactory results were obtained
Park, C.K., and Kang, T.J., Objective Evaluation of Seam Pucker Using Artificial Intelligence Part Three: Using the Objective Method to Analyze the Effects of Sewing Parameters on Seam Pucker, Textile Res. J.69, 919—924 (1999).
2.
Park, C.K., and Kang, T.J., Objective Evaluation of Seam Pucker Using Artificial Intelligence Part One: Geometric Modeling of Seam Pucker, Textile Res. J.69, 735—742 (1999).
3.
Inui, S., and Shibuya, A., Objective Evaluation of Seam Pucker, Int. J. Clothing Sci. Technol.4, 53—64 (1992).
4.
Stylios, G., and Parsons-Moore, R. , Seam Pucker Prediction Using Neural ComputingInt. J. Clothing Sci. Technol.5, 24—27 (1993).
5.
Fan, J., Macalpline, J.M.K., and Lu, D., The Use of a 2-D Digital Filter in the Objective Evaluation of Seam Pucker on 3-D Surfaces, J. Textile Inst.90, 445—455 (1999).
6.
Kang, T.J., Cho, D.H., and Whang, H.S., A. NewObjective Method of Measuring Fabric Wrinkle Using 3-D Projecting Grid Technique , Textile Res. J.69, 261—268 ( 1999).
7.
Kang, T.J., Park, C.K., and Lee, J.Y., Evaluation of Seam Pucker Using Fractal Geometry, J. Textile Inst.90, 621—636 (1999).
8.
Park, C.K., and Kang, T.J., Objective Evaluation of Seam Pucker Using Artificial Intelligence Part Two: Method of Evaluating Seam Pucker, Textile Res. J.69, 835—845 (1999).
9.
Inui, S., and Shibuya, A., Seam Pucker Simulation, Int. J. Clothing Sci. Technol.10, 128—142 (1998).
10.
Inui, S., Okabe, H., and Yamaraka, T., Simulation of Seam Pucker on Two Strips of Fabric Sewn Together, Int. J. Clothing Sci. Technol.13, 53—64 (2001 ).
11.
Baraff, D., and Witkin, A., LargeSteps in Cloth Simulation , Computer Graphics (Proc. SIGGRAPH), 43—54 (1998 ).
12.
Provot, X., Collision and Self-Collision Handling in Cloth Model Dedicated to Design Garments, in “Graphics Interface'97,” 1997.
13.
Provot, X., Deformation Constraints in a Mass-Spring Model to Describe Rigid Cloth Behavior , in “Graphics Interface'95,” 1995 .
14.
Hu, J.L. , and Teng, J.G., Computational Cloth Mechanics: Present Status and Future Trends, Finite Elem. Anal. Design21, 225—237 (1996).
15.
Bridson, R. , Fedkiw, R., and Anderson, J., Robust Treatment of Collisions, Contact and Friction for Cloth Animation, ACM Trans Graphics (ACM SIGGRAPH2002), 21, 594—603 ( 2002).
16.
Wong W.S.-K. , and Baciu, G.Dynamic Interaction between Deformable Surfaces and Nonsmooth Objects, IEEE Trans. Visual. Computer Graphics , 11, 329—340 (2005).
17.
Wong, W.S.K., and Baciu, G., Hardware-Based Collision and Self-Collision for Rigid and Deformable Surfaces , in “MIT Presence” Special Issue, 2004.
18.
Wong, S.-K. , Baciu, G., and Hu, J.L., Multi-Layered Deformable Surfaces for Virtual Clothing, in “Proc. of the ACM Symposium on Virtual Reality Software and Technology, VRST2004,” Hong Kong, 2004.
