A Micromechanical Approach to the Tensile Strength of a Knitted Fabric Composite

Abstract

This paper describes a micromechanical approach to estimate the tensile strength of a knitted fabric reinforced composite. In this new approach, the state of stress in each constituent phase of the composite is explicitly expressed as a function of externally applied overall stress, by means of a bridging matrix. The maximum normal strength theory of isotropic materials is applied to each constituent phase at every load increment level. Once either the fiber or the matrix attains its ultimate strength, the corresponding applied overall stress is defined as the ultimate strength of the composite. In this way, the failure mode of the composite is automatically indicated and so is the strength margin of the constituent phases. The developed strength theory has been applied to several unidirectional composites and also to a plain weft knitted glass fiber fabric reinforced epoxy composite. The predicted tensile strengths in all cases are in good agreement with the corresponding experimental data. Parametric studies have also been carried out to investigate the effects of various geometric and material parameters of the constituent phases on the tensile strength of knitted fabric composites. Useful insights have been gained.

Keywords

tensile strength failure mode micromechanical approach knitted fabric composites textile composites

Get full access to this article

View all access options for this article.

References

1. Ramakrishna, S. , Hamada, H. , Kotaki, M. , Wu, W. L. , Inoda, M. and Maekawa, Z. "Future of Knitted Fabric Reinforced Polymer Composites," in Proc. of 3rd Japan International SAMPE Symposium, Tokyo, 1993, pp. 312-317.

2. Horsting, K. , Wulhorst, B. , Franzke, G. and Offermann, P.

"New Types of Textile Fabrics for Fiber Composites,"

SAMPE J., 1993, 29:7-12.

3. Dewalt, P. L. and Reichard, R. P. "Just How Good are Knitted Fabrics?", J. Reinf Plast. and Comp., 1994, 13:908-917.

4. Mayer, J. , Ruffieux, K. , Tognini, R. and Wintermantel, E. "Knitted Carbon Fibers, a Sophisticated Textile Reinforcement that Offers New Perspectives in Thermoplastic Composite Processing," in Proc. of ECCM6, Bordeaux, 1993, pp. 219-224.

5. Ramakrishna, S. and Hull, D.

"Tensile Behavior of Knitted Carbon-Fiber Fabric/Epoxy Laminates, Part II: Prediction of Tensile Properties,"

Comp. Sci. Tech., 1994, 50:249-258.

6. Ramakrishna, S.

"Characterization and Modeling of the Tensile Properties of Plain Weft-Knit Fabric-Reinforced Composites,"

Comp. Sci. and Tech., 1997, 57:1-22.

7. Mayer, J. and Wintermantel, E.

"Failure Behavior of Knitted Carbon Fiber Reinforced Thermoplastics,"

Proc. Euromat '95, Venice/Padua (Italy), 1995.

8. Hamada, H. , Fujita, A. , Yokoyama, A. and Maekawa, Z.

"Unified Approach for Predicting Mechanical Behaviors of Textile Composites,"

Proc. ACS-Meeting, Delaware (USA), 1994, pp. 377-385.

9. Gommers, B. , Verpoest, I. and Houtte, P. V.

"Modeling the Elastic Properties of Knitted-Fabric-Reinforced Composites,"

Comp. Sci. and Tech., 1996, 56:685-694.

10.

10. Ruan, X. P. and Chou, T. W.

"Experimental and Theoretical Studies of the Elastic Behavior of Knitted-Fabric Composites,"

Comp. Sci. and Tech., 1996, 56:1391-1403.

11.

11. Ramakrishna, S. , Huang, Z. M. , Teoh, S. H. , Tay, A. A. O. and Chew, C. L.

"Application of Leaf and Glaskin's Model for Estimating the 3D Elastic Properties of Knitted Fabric Reinforced Composites,"

J. Textile Inst. (in press).

12.

12. Leaf, G. A. V. and Glaskin, A.

"The Geometry of A Plain Knitted Loop,"

J. Textile Inst., 1955, 45:T587-T605.

13.

13. Adams, D. F. 1974. "Elastoplastic Behavior of Composites," in Mechanics of Composite Materials, G. P. Sendeckyj , ed., Academic Press, New York, pp. 169-208.

14.

14. Aboudi, J.

"Micromechanical Analysis of the Strength of Unidirectional Fiber Composites,"

Comp. Sci. and Tech., 1988, 33:79-96.

15.

15. Hashin, Z. and Rotem, A.

"A Fatigue Failure Criterion for Fiber Reinforced Materials,"

J. Comp. Materials., 1973, 7:448-464.

16.

16. Becker, W. , Pindera, M. I. and Herakovich, C. T. 1987. "Mechanical and Thermal Characterisation of Unidirectional Aramid/Epoxy, CCMS-86-08, VPI-86-29, Virginia Polytechnic Institute and State University.

17.

17. Tsai, S. W. and Hahn, H. T. "Introduction to Composite Materials," Chapter 9, Micromechanics, Technomic Publishing Co., Inc., Lancaster, Basel, 1980, pp. 377-431.

18.

18. Hashin, Z. , Theory of Fiber Reinforced Materials, NASA CR-1974, 1972.

19.

19. Hermans, J. J.

"The Elastic Properties of Fiber Reinforced Materials When the Fibers Are Aligned,"

Proc. Koninkl. Nederl. Akad. Wetenschappen, B70, p. 1-1.

20.

20. Hill, R.

"Theory of Mechanical Properties of Fiber-Strengthened Materials: I. Elastic Behavior,"

J. Mech. Phys. Solids, 1964, 12(12):199-212.

21.

21. McCullough, R. L.

"Micro-Models for Composite Materials-Continuous Fiber Composites, Micromechanical Materials Modeling,"

Delaware Composites Design Encyclopedia, James M. Whitney and Roy L. McCullough , eds., Vol. 2, Technomic Publishing Co., Inc., Lancaster, 1990.

22.

22. Chamis, C. C.

"Mechanics of Composite Materials: Past, Present, and Future,"

J. Comp. Technol. Res., 1989, 11:3-14.