A meso-scale finite element model for static damage in textile composites was established. The impregnated yarn is taken as homogeneous and transverse isotropic material, whose mechanical properties are calculated using Chamis’ equations. The damage modes are determined by using the Tsai-Wu criterion and additional criteria. The Murakami damage tensor is used to calculate the post-damage stiffness matrix. The model has been validated using plain weave and twill weave carbon–epoxy composites. The initiation of inter-fiber matrix cracks and fiber rupture were analyzed using this meso-FE model.
KarkkainenRLSankarBV. A direct micromechanics method for analysis of failure initiation of plain weave textile composites. Compos Sci Technol2006; 66: 137–150.
GreveLPickettAK. Modelling damage and failure in carbon/epoxy non-crimp fabric composites including effects of fabric pre-shear. Compos Part A: Appl Sci Manuf2006; 37: 1983–2001.
9.
LomovSVIvanovDSVerpoestI. Meso-FE modelling of textile composites: Road map, data flow and algorithms. Compos Sci Technol2007; 67: 1870–1891.
10.
NicolettoGRivaE. Failure mechanisms in twill-weave laminates: FEM predictions vs experiments. Compos Part A: Appl Sci Manuf2004; 35: 787–795.
11.
ZakoMUetsujiYKurashikiT. Finite element analysis of damaged woven fabric composite materials. Compos Sci Technol2002; 63: 507–516.
DasguptaABhandarkarSM. Effective thermomechanical behavior of plain-weave fabric-reinforced composites using homogenization theory. J Eng Mater Technol-Trans ASME1994; 116: 99–105.
14.
HamelinPBigaudD. A numerical procedure for elasticity and failure behavior prediction of textile-reinforced composite materials. J Thermoplast Compos Mater1999; 12: 201–213.
15.
KyeongsikWWhitcombJD. Three-dimensional failure analysis of plain weave textile composites using a global/local finite element method. J Compos Mater1996; 30: 984–1003.
16.
WhitcombJSrirenganK. Effect of various approximations on predicted progressive failure in plain weave composites. Compos Struct1996; 34: 13–20.
17.
BlackketterDMWalrathDEHansenAC. Modeling damage in a plain weave fabric-reinforced composite-material. J Compos Technol Res1993; 15: 136–142.
18.
CarvelliVPoggiC. A homogenization procedure for the numerical analysis of woven fabric composites. Compos Part A: Appl Sci Manuf2001; 32: 1425–1432.
19.
MurakamiS. Mechanical modeling of material damage. J Appl Mech1988; 55: 280–286.
20.
Hanaki S, Lomov SV, Verpoest I, et al. Estimation of fatigue life for textile composites based on fatigue test for unidirectional materials. In: Finite element modelling of textiles and textile composites, St-Petersburg, Russia, 26–28 September 2007.
21.
LomovSVGusakovAVHuysmansG. Textile geometry preprocessor for meso-mechanical models of woven composites. Compos Sci Technol2000; 60: 2083–2095.
22.
VerpoestILomovSV. Virtual textile composites software WiseTex: Integration with micro-mechanical, permeability and structural analysis. Compos Sci Technol2005; 65: 2563–2574.
23.
KurashikiTNakaiHHirosawaS. Mechanical behaviours for textile composites by FEM based on damage mechanics. Key Eng Mater2007; 334–335: 257–260.
24.
Kurashiki T, Zako M, Nakai H, et al. A practical numerical simulation system of mechanical behaviour of composites. In: Proc ECCM-12, 12th European conference on composite materials, Biarritz, France, 29 August–1 September 2006.
25.
Lomov SV, Ding X, Hirosawa S, et al. FE simulations of textile composites on unit cell level: validation with full-field strain measurements. In: Proc SAMPE Europe international conference, Paris, France, 5–7 April 2005, pp.28–33.
26.
ShioyaMHayakawaETakakuA. Non-hookean stress-strain response and changes in crystallite orientation of carbon fibres. J Mater Sci1996; 31: 4521–4532.
27.
ToyamaNTakatsuboJ. An investigation of non-linear elastic behavior of CFRP laminates and strain measurement using Lamb waves. Compos Sci Technol2004; 64: 2509–2516.
28.
IvanovDSIvanovSGLomovSV. Unit cell modelling of textile laminates with arbitrary inter-ply shifts. Compos Sci Technol2011; 72: 14–20.
29.
Kurashiki T, Zako M, Hirosawa S, et al. Estimation of a mechanical characterization for woven fabric composites by fem based on damage mechanics. In: ECCM-11, 11th European conference on composite materials, Rhodes, Greece, 31 May–03 June 2004.
30.
PellegrinoCGalvanettoUSchreflerBA. Numerical homogenization of periodic composite materials with non-linear material components. Int J Numer Meth Eng1999; 46: 1609–1637.
31.
WangXFWangXWZhouGM. Multi-scale analyses of 3D woven composite based on periodicity boundary conditions. J Compos Mater2007; 41: 1773–1788.
32.
ChamisCC. Mechanics of composite-materials – past, present, and future. J Compos Technol Res1989; 11: 3–14.
33.
RosenBW. Mechanics of composite strengthening. In: Bush S (ed.) Fiber composite materials, Metals Park, OH: ACM, 1965, pp. 37–75.
34.
HiraiTYoshidaH. The effect of moulding on the mechanical properties of FRP. J Soc Mater Sci Japan1974; 23: 954–959.
35.
TsaiSWWuEM. A general theory of strength for anisotropic materials. J Compos Mater1971; 5: 55–80.
36.
TsaiSW. Theory of composites design, Dayton, Ohio: Think Composites, 1992.
37.
GorbatikhLIvanovDLomovS. On modelling of damage evolution in textile composites on meso-level via property degradation approach. Compos Part A: Appl Sci Manuf2007; 38: 2433–2442.
38.
NishikawaYOkuboKFujiiT. Fatigue crack constraint in plain-woven CFRP using newly-developed spread tows. Int J Fatigue2006; 28: 1248–1253.
39.
TruongTCIvanovDSKlimshinDV. Carbon composites based on multi-axial multi-ply stitched preforms. Part 7: Mechanical properties and damage observations in composites with sheared reinforcement. Compos Part A: Appl Sci Manuf2008; 39: 1380–1393.
40.
KellyAZwebenCH. Comprehensive composite materials: fiber reinforcements and general theory of composites, Oxford: Elsevier, 2000.
41.
CurtisGJMilneJMReynoldsWN. Non-Hookean behaviour of strong carbon fibres. Nature1968; 220: 1024–1025.
42.
LomovSVIvanovDSTruongTC. Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test. Compos Sci Technol2008; 68: 2340–2349.
DaggumatiSVoetEPaepegemWV. Local strain in a 5-harness satin weave composite under static tension: Part I – Experimental analysis. Compos Sci Technol2011.
45.
DaggumatiSDe BaereIVan PaepegemW. Local damage in a 5 – harness satin weave composite under static tension: Part I – Experimental analysis. Compos Sci Technol. (in press).
46.
MoriTTanakaK. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall1973; 21: 571–574.
47.
RattanRBijweJFahimM. Optimization of weave of carbon fabric for best combination of strength and tribo-performance of polyetherimide composites in adhesive wear mode. Wear2008; 264: 96–105.
48.
Fagiano C, Baranger E, Ladeveze P, et al. Computational strategy for the mesoscale modelling of thermostructural woven composites. In: ECCM-15, 15th European conference on composite materials, Venice, Italy, 24–28 June 2012.
