Quasi-static, low-velocity impact (LVI) and ballistic impact loading conditions were used to find the material properties and dynamic responses of E-glass/phenolic composites. Standard American Society for Testing and Materials (ASTM) tests were used to find the density, Poisson’s ratio, tensile, compressive and shear strengths, and the elastic and shear moduli of the material. The quasi-static punch shear and crush strength tests were used to find the punch shear and crush strengths of the material. LVI tests were conducted to obtain force versus time curves for various loading conditions. Ballistic testing was conducted using a right circular cylinder (RCC) to find the V50 ballistic limit and the depth of penetration of the RCC at various impact velocities. The experimental results of this investigation can be used for structural design and to validate numerical solutions for both LVI and ballistic impact events.
Hexcel. Prepreg technology. Publication No. FGU 017b, March 2005.
2.
MIL-HDBK-17-2F. Department of defense composite materials handbook Volume 2. Polymer matrix composites materials properties. 2002. Philadelphia, PA: DAPS.
3.
St JohnNABrownJR. Flexural and interlaminar shear properties of glass-reinforced phenolic composites. Compos Part A1998; 29A: 939–946.
4.
AGY. High strenght class fibers. Publication No. LIT-2006-111, 2006.
5.
HayatMASulimanSMA. Mechanical and structural properties of glass reinforced phenolic laminates. Polym Test1998; 17: 79–97.
6.
MennaCAsproneDCaprinoG. Numerial simulation of impact tests on GFRP composite laminates. Int J Impact Eng2011; 38: 677–685.
7.
Yen CF, Cheeseman BA, Hoppel CP, et al. Modeling the compressive failure of plain weave composites. In: Proceedings of the American Society for Composites 19th annual technical conference, Atlanta, GA, 2004.
8.
XiaoJRGamaBAGillespieJWJr. Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading. Compos Struct2007; 78(2): 182–196.
9.
GamaBAGillespieJWJr. Punch shear based penetration model of ballistic. Compos Struct2008; 86: 356–369.
10.
Haque BZ, Chowdhury SC, Biswas I, et al. Modeling the low velocity impact damage behavior of S-glass/phenolic composites. In: SAMPE 2012, Baltimore, MD, 2012.
11.
Brown K, Brooks R and Warrior N. Numerical simulation of damage in thermoplastic composite materials. In: 5th European LS-DYNA Users Conference, Birmingham, UK, 2005.
12.
Haque BZ, Chowdhury SC, Biswas I, et al. Modeling the low velocity impact damage behavior of S-glass/phenolic composites. In: SAMPE 2012, Baltimore, MD, 2012.
13.
Haque BA, Biswas I, Chowdhury SC, et al. Modeling the depth of penetration and ballistic impact on S-glass/phenolic thick section composites. In: American Society for Composites 27th technical conference, Arlington, TX, 2012.
ASTM, D792-08. Standard test methods for density and specific gravity (relative density) of plastics by displacement, West Conshohocken, PA: American Society for Testing and Materials, 2008.
16.
ASTM, D3039/D3039M-08. Standard test method for tensile properties of polymer matrix composite materials, West Conshohocken, PA: American Society for Testing and Materials, 2008.
17.
ASTM, D5379/D5379M-05. Standard test method for shear properties of composite materials by the V-notched beam method, West Conshohocken, PA: American Society for Testing and Materials, 2005.
18.
ASTM, D6641/D6641M-09. Standard test method for compressive properties of polymer matrix composite materials using a combined loading compression (CLC) test fixture, West Conshohocken, PA.: American Society for Testing and Materials, 2009.
19.
ASTM, D7291-07. Through-thickness "Flatwise" tensile strength and elastic modulus of a fiber-reinforced polymer matrix composite material, West Conshohoken, PA: American Society of Test Methods, 2007.
Lambert JP and Jonas GH. Towards standardization in terminal ballistics testing: velocity representation. Aberdeen Proving Grounds, MD: BRL-R-1852 U.S. Army Ballistics Research Laboratory, 1976.
26.
Haque BZ and Gillespie JW, Jr. A new penetration equation satisfying momentum and energy conservation. In: SAMPE 2012, Baltimore, MD, 2012.
27.
BorvikTHopperstandOSLangsethM. Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates. Int J Impact Eng2003; 28: 413–464.
28.
ASTM, D3878-07. Standard terminology for composite materials, West Conshohocken, PA: American Society for Testing and Materials, 2007.
