Sage Journals: Discover world-class research

Abstract

A great value is nowadays being given to light-weight structures and durable light-weight materials and composites. In this respect, fiber reinforced plastics (FRP) are given more importance and are becoming one of the most distinguishing material categories next to metals. This research provides some results of mechanical properties of natural fiber reinforced polyolefins (PP, PE) in comparison to some biodegradable polymers, combined without any bonding enhancements, such as bonding agents or surface modifications. It is for this reason that the composites in this study do not show significant improvement in the mechanical properties of polymers; however they can be used as reference values for the mere natural fiber reinforcement. A comparison of polyolefins and biodegradable polymers shows that some biodegradable polymers eventually provide higher mechanical properties, mainly depending on the initial properties of the neat material.

Keywords

natural fibers flax hemp biodegradable polymers biocomposites

Get full access to this article

View all access options for this article.

References

Flemming, M. , Ziegmann, G. and Roth, S. (1995). Einführung, Faserverbundbauweisen: Fasern und Matrices, pp. 1-5 and 155-179, Springer-Verlag, Berlin, Heidelberg .

Flemming, M. , Ziegmann, G. and Roth, S. (1996). Einführung, Faserverbundbauweisen: Halbzeuge und Bauweisen, pp. 1-7, Springer-Verlag, Berlin, Heidelberg .

Taenzer, W. (2000). Der Bioabbau, Biologisch abbaubare Polymere, 1. Auflage, pp. 22-37, Deutscher Verlag fur Grundstoffindustrie, Stuttgart .

Taha, I. and Ziegmann, G. (2005). Bright Prospects for Light Weight Natural Reinforced Structures , In: 1st Ain Shams University Conference on Environmental Engineering in Cairo, 9.-12.04.05, Vol. II, pp. 1265-1275 .

Taha, I. and Ziegmann, G. (2005). On the Potential of Biodegradable Composites , In: SAMPE Europe International Conference Paris, 5.-7.04.05, pp. 364-369 .

Lampke, Thomas (2001). Naturfaserverstarkte Kunststoffe, Beitrag zur Charakterisierung Naturfaserverstarkter Verbundwerkstoffe mit Hochpolymerer Matrix, Dissertation an der TU Chemnitz, pp. 36-45.

Hill, C. A. S. and Abdul Khalil, H. P. S. (2000). Effect of Fibre Treatments on Mechanical Properties of Coir or Oil Palm Fiber Reinforced Polyester Composites , Journal of Applied Polymer Science, 78(9): 1685-1697 .

George, J. , Sreekala, M. S. and Thomas, Sabu (2001). A Review on Interface Modification and Characterization of Natural Fibre Reinforced Plastic Composites , Polymer Engineering and Science, 41(9): 1471-1485 .

Peijs, T. , Garkhail, S. , Heijenrath, R. , Van der Oeve, M. and Bos, H. (1998). Thermoplastic Composites based on Flax Fibres and Polypropylene: Influence of Fibre Length and Fibre Volume Fraction on Mechanical Properties, In: Macromolecular Symposia, Vol. 127, pp. 193-203, February 1998; Huthing & Wepf Verlag, Zug, Heidelberg, Oxford, CT, USA .

10.

Koller, I. (1994). Einfluss von Maisstarke auf die mechanischen Eigenschaften von PHB und BHB/HV, Physikalische Eigenschaften der mit Maisstarke gefullten Biopolymere PHB und PHB/HV, Dissertation zur Erlangung des Doktorgrades der Naturwissenschaftlichen Fakultat II - Physik der Universitat Regensburg, pp. 35-42, PhD Thesis at the University of Regensburg.

11.

Garkhail, S. , Heijenrath, R. W. H. and Peijs, T. (2000). Mechanical Properties of Natural Fibre Mat Reinforced Thermoplastics based on Flax Fibres and Polypropylene , Applied Composite Materials, 7(5-6): 403-414 .

A Comparison of Mechanical Properties of Natural Fiber Filled Biodegradable and Polyolefin Polymers

Abstract

Keywords

Get full access to this article

References