Corrosion of rock bolts is a relatively slow process yet a potential problem for the underground mining industry. Mine groundwater in the strata through natural or mining-induced cracks together with the humid environment in the mine openings interact with the roof support systems often resulting in corrosion. Electrochemical studies of the commonly used rock bolt steel in the coal mining environments will lead to a better understanding of the material's performance and their ability to resist corrosion. The influence of pH, solution resistivity, total dissolved solids, and aggressive ions on the electrochemical properties of rock bolt steel are discussed. This preliminary study focuses on understanding the corrosion potential, polarization resistance, and corrosion rates of the rock bolt steel that is most commonly used in US underground coal mines. Based on the findings, it was observed that the polarization resistance (Rp) is inversely proportional to the corrosion rate (CR) over time.
ASTM. 1989 (2004). ASTM G102 standard practice for calculation of corrosion rates and related information from electrochemical measurements. West Conshohocken (PA): ASTM International.
2.
ASTM. 1994 (2004). ASTM G5 standard reference test method for making potentiostatic and potentiodynamic anodic polarization measurements. West Conshohocken (PA): ASTM International.
3.
ASTM. 1997 (2009). ASTM G59 standard test method for conducting potentiostatic and potentiodynamic anodic polarization measurements. West Conshohocken (PA): ASTM International.
4.
AzizN, CraigP, NemcikJ, HaiF.2014. Rock bolt corrosion – an experimental study. Min Technol. 123 (2): 69 – 77. doi: 10.1179/1743286314Y.0000000060
5.
BhagwatA, TadoliniSC.2018. Sacrificial anode technology for corrosion protection of mine roof bolts. Preprint presented at: SME Annual Meeting; Minneapolis, MN.
6.
BylapudiG.2014. Stress corrosion cracking of rebar roof bolts in U.S. underground coal mines – a preliminary study. Carbondale: Southern Illinois University Carbondale.
7.
BylapudiG, SpearingAJS, MondalK, BhagwatA.2015. Stress corrosion cracking – hypothetically a major threat to underground mine roof support systems and rock anchors. Trans Soc Min Metall Explor. 338: 510 – 517.
8.
BylapudiG, SpearingAJS, MondalK, BhagwatA.2019. Stress corrosion testing of roof bolt grade 60 steel in simulated underground coal mine atmosphere. Min Technol. 128 (4): 206 – 215. doi: 10.1080/25726668.2019.1616951
9.
BylapudiG, SpearingAJS, MondalK, BhagwatA.2020. Design and evaluation of the roof bolt corrosion test system in a simulated underground coal mine environment. Min Metall Explor. 37 (2): 593 – 604.
10.
ChenH, RamandiHL, WalkerJ, CroskyA, SaydamS.2018. Failure of the threaded region of rockbolts in underground coal mines. Min Technol. 127 (3): 146 – 154. doi: 10.1080/14749009.2018.1428060
11.
CraigPH, SaydamS, HaganP, VandermaatDP, EliasE, CroskyA.2015. Investigations into the corrosive environments contributing to premature failures of Australian coal mine rock bolts. 34th International Conference on Ground Control in Mining; Morgantown, WV.
12.
DiviS, ChandraD, DaemenJ.2011. Corrosion susceptibility of potential rock bolts in aerated multi-ionic simulated concentrated water. Tunn Undergr Space Technol. 26: 124 – 129. doi: 10.1016/j.tust.2010.07.003
DonerA, SahinEA, KardasG, SerindagO.2013. Investigation of corrosion inhibition effect of 3-[(2-hydroxy-benzylidene)-amino]−2-thioxo-thiazolidin-4-one on corrosion of mild steel in the acidic medium. Corros Sci. 66: 278 – 284. doi: 10.1016/j.corsci.2012.09.030
15.
DorionJF.2013. Corrosion of the mine support [PhD]. Laval University, Montreal.
16.
DorionJF, HadjigeorgiouJ, GhaliE.2009. Quantifying the rate of corrosion in selected underground mines. 3rd CANUS Rock Mechanics Symposium, Toronto.
17.
EliasE, VandermaatD, CraigP, ChenH, CroskyA, SaydamS, HaganP, HebblewhiteB.2013. Metallurgical examination of rock bolts failed in service due to stress corrosion cracking. Ground Support Conference; Australian Centre for Geomechanics, Perth. p. 473–483.
18.
GuoQ, PanJ, WangM, CaiM, XiX.2019. Corrosive environment assessment and corrosion-induced rock-bolt failure analysis in a costal underground mine. Int J Corros. 2019. Article ID 2105842, 9 pages. https://doi.org/10.1155/2019/2105842.
19.
HadjigeorgiouJ, SavguiraY, ThorpeSJ.2020. Impact of steel properties on the corrosion of expandable rock bolts. Rock Mech Rock Eng. 53: 705 – 721. doi: 10.1007/s00603-019-01939-w
20.
HassellR.2008. Corrosion of rock reinforcements in underground excavations [PhD]. Western Australian School of Mines. Curtin University, Perth.
21.
HebblewhiteB, FabjanczykM, GrayP.2003. Investigations into premature rock bolt failures in the Australian coal mining industry. Underground Coal Operators’ Conference. Paper 167. http://ro.uow.edu.au/coal/167.
22.
KangH, YangJ, MengX.2015. Tests and analysis of mechanical behaviour of rock bolt components for China's coal mine roadways. J Rock Mech Geotech Eng. 7 (1): 14 – 26. doi: 10.1016/j.jrmge.2014.12.002
23.
MaK, StankusJ, FaulknerD, MaL.2017. Development and evaluation of the inflatable PythonM3 bolt and innovative PyFlexU2 coating against highly-corrosive ground conditions. Conference Presentation. Febraury 2017, SME Annual Conference and Expo. Denver (CO).
24.
MishraB, PakJJ.2006. Corrosion in the mining and mineral industry. Corrosion in specific industries. Novelty, OH: ASM International. 13C: 1076 – 1082. https://doi.org/10.31399/asm.hb.v13c.a0004219.
25.
MSHA. 2015. Preventive roof/rib outreach program (PROP). MSHA.GOV: MSHA.
26.
OelbnerW, BertholdF, GuthU.2006. The IR drop – well-known but often underestimated in electrochemical polarization measurements and corrosion test. Mater Corros. 57 (6): 455 – 466. doi: 10.1002/maco.200603982
27.
RobergePR.2008. Corrosion engineering principles and practice. NEW YORK, United States of America: McGraw-Hill. doi: 10.1036/0071482431.
28.
RoyJM, PrestonR, BewickRP.2016. Classification of aqueous corrosion in underground mines. Rock Mech Rock Eng. 49 (8): 3387 – 3391. doi: 10.1007/s00603-016-0926-z
29.
ShutterDM, GearyW, HeyesPF.2001. Engineering performance of mining rock bolts. 29th International Conference on Safety in Mines Research Institutes, October, Szczyrk.
30.
SpearingAJS, BylapudiG, MondalK, BhagwatAW.2014. Rock anchor corrosion potential determination in US underground coal mines. Preprint Presented at: 6th South African Rock Engineering Symposium; December 5; Misty Hills, Muldersdrift.
31.
SpearingAJS, MondalK, BylapudiG.2010a. The corrosion of rock anchors in US coal mines. SME Annual Meeting; February 28; Phoenix (AZ).
32.
SpearingAJS, MondalK, BylapudiG.2010b. Experimental studies on corrosion of rock anchors in U.S. underground coal mines. Trans Soc Min Metall Explor. 328: 556 – 563.
33.
SpearingAJS, MondalK, BylapudiG, WeberJ.2013. Experimental research on rock anchor corrosion in US underground coal mines. Trans Soc Min Metall Explor. 334: 410 – 419.
34.
SpearingAJS, MuellerA.2009. Current trends in U.S. coal mine intersection support and roof falls. Trans Soc Min Metall Explor. 326: 16 – 20.
35.
SpellerFN.1951. Corrosion: causes and prevention. New York (NY): McGraw-Hill.
36.
ToshevY, MandovaV, BoshkovN, StoychevD, PetrovP, TsvetkovaN, RaichevskiG, TsvetanovC, GabevA, VelevR, KostadinovK.2006. Protective coating of zinc and zinc alloys for industrial applications. Second International Conference on Multi-Material Micro Manufacture. Elsevier. p. 323–326.
37.
VillaescusaE, HassellR, ThompsonA.2007. Corrosion of rock reinforcement in underground excavations. Minerals and Energy Research Institute of Western Australia. East Perth. Report No. 263.
38.
WeberJ.2013. Corrosion of rock anchors in Illinois coal basin mines. Carbondale: Southern Illinois University Carbondale.
39.
ZhangXG.1996. Corrosion potential and corrosion current. Corrosion and electrochemistry of zinc. Boston (MA): Springer. p. 125 – 156.
