Corrosion of roof bolts in underground mine environments could have an adverse impact on ground control, which is directly related to workforce safety. Past studies state that stress corrosion cracking (SCC) of roof bolts is a significant problem in underground coal mines, resulting in premature bolt failures. However, it has not been seriously studied in U.S. underground coal mines. As a preliminary study, the most common roof bolt material used in U.S. mines, ASTM A 615 Grade 60 steel, was studied under stress corrosion conditions. ASTM G30 standard was applied to achieve this and tested in the simulated coal mine conditions. SCC was observed on samples that were tested for 180 days. Chloride SCC (ClSCC) was found to be the corrosion mechanism resulting in cracks from the EDS data. This paper mainly discusses the test protocol, shortcomings of this preliminary testing and makes recommendations based on the observations and results.
AritanAE, CanMF.2019. The corrosion effect on supports used in underground mining operations generated by low-rank salt bearing coals: the Central Anatolia case. Arab J Geosci. 12(200). DOI:10.1007/s12517-019-4349-5.
2.
ASTM. 1997 (2016). ASTM g30 standard practice for making and using U-bend stress-corrosion test specimens. ASTM International. West Conshohocken (PA): ASTM International.
3.
ASTM. 2003 (2011). ASTM g1 standard practice for preparing, cleaning, and evaluating corrosion test specimens. ASTM International. West Conshohocken (PA): ASTM International.
4.
ASTM. 2016. ASTM a615 standard specification for deformed and plain carbon-steel bars for concrete reinforcement. ASTM International. West Conshohocken (PA): ASTM International.
5.
BhagwatAW, TadoliniSC.2018. Sacrificial anode technology for corrosion protection of mine roof bolts. Preprint presented at: SME Annual Meeting; Minneapolis (MN).
6.
BylapudiG.2010. Corrosion of Rock Anchors in U.S. Coal Mines [Theses].
7.
BylapudiG.2014. Stress corrosion cracking of rebar roof bolts in U.S. underground coal mines – a preliminary study. Carbondale, IL: Southern Illinois University Carbondale.
8.
BylapudiG, SpearingAJS, MondalK, BhagwatA.2015. Stress corrosion cracking – hypothetically a major threat to underground mine roof support systems and rock anchors. Trans Soc Min, Metall Explor. 338:510–517.
9.
ChatterjeeUK.1995. Stress corrosion cracking and component failure: causes and prevention. Sadhana. 20(Part 1):165–184. doi: 10.1007/BF02747288
10.
ChenH, RamandiHL, WalkerJ, CroskyA, SaydamS.2018. Failure of the threaded region of rockbolts in underground coal mines. Transactions of the Institute of Mining and Metallurgy. Sect A: Mining Technology. 127(3):146–154.
11.
CraigB.2018. Some corrosion and metallurgy issues in coal mines. materials performance. Houston (TX): NACE International. p. 44–46.
12.
CraigPH, SaydamS, HaganP, VandermaatDP, EliasE, CroskyA.2015. Investigations into the corrosive environments contributing to premature failures of Australian coal mine rock bolts. 34th International Conference on Ground Control in Mining;; Morgantown (WV).
13.
EliasE, VandermaatD, CraigP, ChenH, CroskyA, SaydamS, HaganP, HebblewhiteB.2013. Metallurgical examination of rock bolts failed in service due to stress corrosion cracking. In: Brady B and Potvin Y, editors. Proceedings 7th International Symposium on Ground Support in Mining and Underground Construction, At Australian Centre for Geomechanics; Perth, Australia. p. 473–483.
14.
Garcia-DiazBL, MickalonisJI, WiersmaBJ.2009. Determination of corrosion inhibitor criteria for type III/IIIA tanks during salt dissolution operations-summary document. Aiken (SC): Savannah River National Laboratory. DE-AC09-08SR22470.
15.
GuoQ, PanJ, WangM, CaiM, XiX.2019. Corrosive environment assessment and corrosion-induced rockbolt failure analysis in a costal underground mine. Int J Corros. 2019. DOI:10.1155/2019/2105842.
16.
HebblewhiteBK, FabjanczykM, GrayP, CroskyA.2004. Premature bolt failures in Australian coal mines due to stress corrosion cracking. International Ground Support Conference; Perth. p. 509–520.
17.
HieuPH, TahirC.2010. Fundamental studies on stress-corrosion cracking in iron and underlying mechanisms. Acta Mater. 58:5142–5149. doi: 10.1016/j.actamat.2010.05.050
18.
JianZ, WenzhengJ, XianmingZ, BingL, BingZ, JiaxianX.2007. Experimental study on durableness of anchor with stress corrosion. Chin J Rock Mech Eng. 26(S1):3427–3431.
19.
JonesHR.1992. Mechanisms of stress corrosion cracking. In: JonesHR, editor. Stress-corrosion cracking: materials performance and evaluation. Materials Park (OH): ASM International; p. 1–40.
20.
JonesRH, RickerRE.1992. Chapter 1, mechanisms of stress-corrosion cracking. In: JonesRH, editor. Stress-corrosion cracking materials performance and evaluation. 1 ed. Materials Park (OH): ASM International; p. 1–40.
21.
KangH, WuY, GaoF, LinJ, JiangP.2013. Fracture characteristics in rock bolts in underground coal mine roadways. Int J Rock Mech Min Sci. 62(1):105–112. doi: 10.1016/j.ijrmms.2013.04.006
22.
LatypovaR, KauppiT, MehtonenS, HanninenH, PorterD, KomiJ.2019. Novel stress corrosion testing method for high-strength steels. Mater Corros. 70(3):521–528. doi: 10.1002/maco.201810462
23.
LyonKN, MarrowTJ, LyonSB.2015. Influence of milling on the development of stress corrosion cracks in austenitic stainless steel. J Mater Process Technol. 218:32–37. doi: 10.1016/j.jmatprotec.2014.11.038
24.
MaK, StankusJ, FaulknerD, MaL.2017. Development and evaluation of the inflatable PythonM3 bolt and innovative PyFlexU2 coating against highly-corrosive ground conditions. Denver (CO): SME Annual Conference and Expo.
25.
Michael BakerI. Jr.2004. Stress corrosion cracking study. Department of Transportation Research and Special Programs Administration. DTRS56-02-D-70036.
PileJ.2012. Corrosion potential determination studies in U.S. coal mines. In: Bylapudi G, editor.
28.
RoyJM, PrestonR, BewickRP.2016. Classification of aqueous corrosion in underground mines. Rock Mech Rock Eng. 49(8):3387–3391. doi: 10.1007/s00603-016-0926-z
29.
ShutterDM, GearyW, HeyesPF.2001. Engineering performance of mining rock bolts. 29th International Conference on Safety in Mines Research Institutes; Szczyrk, Poland.
30.
SpearingAJS, BylapudiG, MondalK, BhagwatAW.2014. Rock anchor corrosion potential determination in US underground coal mines. 6th South African Rock Engineering Symposium; 05/12/2014; Misty Hills, Muldersdrift, South Africa.
31.
SpearingAJS, MondalK, BylapudiG.2010a. The corrosion of rock anchors in U.S. coal mines. SME Annual Meeting; Phoenix (AZ).
32.
SpearingAJS, MondalK, BylapudiG.2010b. The corrosion of rock bolts and a method to quantify the corrosion potential in mines. Can Inst Min. 1(3):213–220.
33.
SpearingAJS, MondalK, BylapudiG.2010c. Experimental studies on corrosion of rock anchors in U.S. underground coal mines. Trans Soc Min Metall Explor. 328:556–563.
34.
SpearingAJS, MondalK, BylapudiG, WeberJ.2013. Experimental research on rock anchor corrosion in US underground coal mines [Transactions of SME]. Trans Soc Min Metall Eng. 334:410–419.
35.
TadoliniSC, MazzoniRA.2006. Twenty four conferences; more than one-hundred and seventy papers; understanding roof bolt selection and design still remains priceless. 25th International Conference on ground control in mining; Morgantown.
36.
VandermaatDP, EliasE, CraigP, SaydamS, CroskyA, HaganP, HebblewhiteB.2012. Experimental protocol for stress corrosion cracking of rock bolts. Coal Operators’ Conference; NSW.
37.
VandermaatDP, EliasE, CroskyA, TangZ, CraigP, SaydamS, HebblewhiteB.2012. Coupon testing for field assessment of stress corrosion cracking of rock bolts. International Conference on ground control in mining;; Morgantown (WV).
38.
WuS, ChenH, CraigP, RamandiHL, TimmsW, HaganPC, CroskyA, HebblewhiteB, SaydamS.2018. An experimental framework for simulating stress corrosion cracking in cable bolts. Tunneling Undergr Space Technol. 76:121–132. doi: 10.1016/j.tust.2018.03.004
