The effect of stress on the crevice corrosion of P110 carbon steel in the CO2-saturated 3.5 wt-% NaCl solution with a small amount of thiosulphate/H2S was investigated. The results showed that the composition of corrosion products on the steel surface did not change with elastic stress while the mackinawite film formed at the crevice mouth was more easily spalled off under higher stresses. Further, the elastic stress likely promoted localised corrosion but inhibited uniform corrosion both inside and outside crevice. Increasing the applied stress led to a deeper and sharper corrosion groove covering with corrosion products at the crevice mouth, suggesting the crevice corrosion was promoted by the applied stress. This is likely due to the peeling of mackinawite film and stress concentration at the crevice mouth.
ZhuSDWeiJFBaiZQ. Failure analysis of P110 tubing string in the ultra-deep oil well. Eng Fail Anal. 2011; 18: 950–962. doi: 10.1016/j.engfailanal.2010.11.013.
2.
ZhuSDWeiJFCaiR. Corrosion failure analysis of high strength grade super 13Cr-110 tubing string. Eng Fail Anal. 2011; 18: 2222–2231. doi: 10.1016/j.engfailanal.2011.07.017.
3.
DongLJZhangXLLiYF. Effect of thiosulphate/H2S on crevice corrosion behaviour of P110 carbon steel in CO2-saturated solution. Corros Eng Sci Techn. 2020; 55: 253–267. doi: 10.1080/1478422X.2020.1721945.
4.
LiYZXuNGuoXP. The role of acetic acid or H+ in initiating crevice corrosion of N80 carbon steel in CO2-saturated NaCl solution. Corros Sci. 2017; 128: 9–22. doi: 10.1016/j.corsci.2017.08.028.
5.
LiYZXuNLiuGR. Crevice corrosion of N80 carbon steel in CO2-saturated environment containing acetic acid. Corros Sci. 2016; 112: 426–437. doi: 10.1016/j.corsci.2016.08.002.
6.
ZhuSDFuAQMiaoJ. Corrosion of N80 carbon steel in oil field formation water containing CO2 in the absence and presence of acetic acid. Corros Sci. 2011; 53: 3156–3165. doi: 10.1016/j.corsci.2011.05.059.
7.
HuQZhangGQiuY. The crevice corrosion behaviour of stainless steel in sodium chloride solution. Corros Sci. 2011; 53: 4065–4072. doi: 10.1016/j.corsci.2011.08.012.
8.
TanY-JBaileySKinsellaB.Mapping non-uniform corrosion using the wire beam electrode method. II. Crevice corrosion and crevice corrosion exemption. Corros Sci. 2001; 43: 1919–1929. doi: 10.1016/S0010-938X(00)00191-8.
9.
TanY-JFwuYBhardwajK.Electrochemical evaluation of under-deposit corrosion and its inhibitionusing the wire beam electrode method. Corros Sci. 2011; 53: 1254–1261. doi: 10.1016/j.corsci.2010.12.015.
10.
HuQGuoXPZhangGA. The corrosion behavior of carbon steel in CO2-saturated NaCl crevice solution containing acetic acid. Mater Corros. 2012; 63: 720–728. doi: 10.1002/maco.201006027.
11.
LiYZXuNGuoXP. Inhibition effect of imidazoline inhibitor on the crevice corrosion of N80 carbon steel in the CO2-saturated NaCl solution containing acetic acid. Corros Sci. 2017; 126: 127–141. doi: 10.1016/j.corsci.2017.06.021.
12.
ZouJPangXLGaoKW.Crevice corrosion of X70 and 3Cr low alloy steels under supercritical CO2 condition. Acta Metall Sin. 2018; 54: 537–546. doi: 10.11900/0412.1961.2017.00353.
13.
ChenXWangGFGaoFJ. Effects of sulphate-reducing bacteria on crevice corrosion in X70 pipeline steel under disbonded coatings. Corros Sci. 2015; 101: 1–11. doi: 10.1016/j.corsci.2015.06.015.
14.
YinKLiuHChengYF.Microbiologically influenced corrosion of X52 pipeline steel in thin layers of solution containing sulfate-reducing bacteria trapped under disbonded coating. Corros Sci. 2018; 145: 271–282. doi: 10.1016/j.corsci.2018.10.012.
15.
WuTQYanMCYuLB. Stress corrosion of pipeline steel under disbonded coating in a SRB-containing environment. Corros Sci. 2019; 157: 518–530. doi: 10.1016/j.corsci.2019.06.026.
16.
KappesMA. Evaluation of thiosulfate as a substitute for hydrogen sulfide in sour corrosion fatigue studies, Ph.D. Dissertation, Ohio State University, Ohio, 2011.
17.
ZafarMNRihanRAl-HadhramiL.Evaluation of the corrosion resistance of SA-543 and X65 steels in emulsions containing H2S and CO2 using a novel emulsion flow loop. Corros Sci. 2015; 94: 275–287. doi: 10.1016/j.corsci.2015.02.013.
18.
BaoMYRenCQLeiMY. Electrochemical behavior of tensile stressed P110 steel in CO2 environment. Corros Sci. 2016; 112: 585–595. doi: 10.1016/j.corsci.2016.08.021.
19.
YangH-QZhangQTuS-S. Effects of inhomogeneous elastic stress on corrosion behaviour of Q235 steel in 3.5% NaCl solution using a novel multi-channel electrode technique. Corros Sci. 2016; 110: 1–14. doi: 10.1016/j.corsci.2016.04.017.
20.
LiYZGuoXPZhangGA.Synergistic effect of stress and crevice on the corrosion of N80 carbon steel in the CO2-saturated NaCl solution containing acetic acid. Corros Sci. 2017; 123: 228–242. doi: 10.1016/j.corsci.2017.05.005.
21.
LiYZWangXZhangGA.Corrosion behaviour of 13Cr stainless steel under stress and crevice in 3.5 wt.% NaCl solution. Corros Sci2020; 163: 108290, doi: 10.1016/j.corsci.2019.108290.
22.
PohjannePLeinonenHScoppioL. Crevice corrosion induced SSC of 25Cr tungsten alloyed super duplex stainless steel tubing exposed to H 2S/CO 2 sour environment, in: Proceedings of CORROSION 2011, NACE International, Houston, Texas. https://www.onepetro.org/conference-paper/NACE-11097.
23.
ZhaoJMLuYLiuHX.Corrosion and control of P110 oil tube steel in CO2-saturated solution. Corros Eng Sci Techn. 2008; 43: 313–519. doi: 10.1179/174327808X315650.
24.
ZhuSDZhouGSMiaoJ. Mechanical properties of CO2 corrosion scale formed at different temperatures and their relationship to corrosion rate. Corros Eng Sci Techn. 2012; 47: 171–177. doi: 10.1179/1743278211Y.0000000023.
25.
LiuZYLiHJiaZJ. Failure analysis of P110 steel tubing in low-temperature annular environment of CO2 flooding wells. Eng Fail Anal. 2015; 60: 296–306. doi: 10.1016/j.engfailanal.2015.11.041.
26.
RihanRAl-WakaaBTanoliN. The susceptibility of P110 downhole tubular steel to sulfide stress cracking in H2S and NaCl. J Petrol Sci Eng. 2019; 174: 1034–1041. doi: 10.1016/j.petrol.2018.10.102.
27.
MajchrowiczKBrynkTWieczorekM. Exploring the susceptibility of P110 pipeline steel to stress corrosion cracking in CO2-rich environments. Eng Fail Anal. 2019; 104: 471–479. doi: 10.1016/j.engfailanal.2019.06.016.
28.
ASTM G39-99. Standard practice for preparation and use of bent-beam stress-corrosion test specimens. West Conshohocken (PA): ASTM International; 2016 doi: 10.1520/G0039-99R16.
29.
KappesMFrankelGSSridharN. Reaction paths of thiosulfate during corrosion of carbon steel in acidified brines. J Electrochem Soc. 2012; 159: C195–C204. doi: 10.1149/2.085204jes.
30.
KappesMFrankelGSSridharN. Corrosion behavior of carbon steel in acidified, thiosulfate-containing brines. Corrosion. 2012; 68: 872–884. doi: 10.5006/0610.
31.
LiuZGaoXDuL. Comparison of corrosion behaviour of low-alloy pipeline steel exposed to H2S/CO2-saturated brine and vapour-saturated H2S/CO2 environments. Electrochim Acta. 2017; 232: 528–541. doi: 10.1016/j.electacta.2017.02.114.
32.
SunJBSunCZhangGA. Effect of O2 and H2S impurities on the corrosion behavior of X65 steel in water-saturated supercritical CO2 system. Corros Sci. 2016; 107: 31–40. doi: 10.1016/j.corsci.2016.02.017.
33.
ChoiY-SHassaniSVuTN. Effect of H2S on the corrosion behavior of pipeline steels in supercritical and liquid CO2 environments. Corrosion. 2016; 72: 999–1009. doi: 10.5006/2026.
34.
LiDPZhangLYangJW. Effect of H2S concentration on the corrosion behavior of pipeline steel under the coexistence of H2S and CO2. Int J Min Met Mater. 2014; 21: 388–394. doi: 10.1007/s12613-014-0920-y.
35.
HuangXBYinZFLiHL. Corrosion of N80 tubing steel in brine at 1.2 MPa CO2 containing trace amounts of H2S. Corros Eng Sci Techn. 2012; 47: 78–83. doi: 10.1179/1743278211Y.0000000019.
36.
WeiLPangXLGaoKW.Corrosion of low alloy steel and stainless steel in supercritical CO2/H2O/H2S systems. Corros Sci. 2016; 111: 637–648. doi: 10.1016/j.corsci.2016.06.003.
37.
WeiLPangXLGaoKW.Effect of small amount of H2S on the corrosion behavior of carbon steel in the dynamic supercritical CO2 environments. Corros Sci. 2016; 103: 132–144. doi: 10.1016/j.corsci.2015.11.009.
38.
OhBHJangSY.Prediction of diffusivity of concrete based on simple analytic equations. Cement Concrete Res. 2004; 34: 463–480. doi: 10.1016/j.cemconres.2003.08.026.
39.
XuLYChengYF.An experimental investigation of corrosion of X100 pipeline steel under uniaxial elastic stress in a near-neutral pH solution. Corros Sci. 2012; 59: 103–109. doi: 10.1016/j.corsci.2012.02.022.
40.
XuJBaiYLWuTQ. Effect of elastic stress and alternating current on corrosion of X80 pipeline steel in simulated soil solution. Eng Fail Anal. 2019; 100: 192–205. doi: 10.1016/j.engfailanal.2019.02.059.
41.
SkMHAbdullahAMKoM. Local supersaturation and the growth of protective scales during CO2 corrosion of steel: effect of pH and solution flow. Corros Sci. 2017; 126: 26–36. doi: 10.1016/j.corsci.2017.05.026.
42.
BarkerRBurkleDCharpentierT. A review of iron carbonate (FeCO3) formation in the oil and gas industry. Corros Sci. 2018; 142: 312–341. doi: 10.1016/j.corsci.2018.07.021.
43.
SongG-L.Potential and current distributions of one-dimensional galvanic corrosion systems. Corros Sci. 2010; 52: 455–480. doi: 10.1016/j.corsci.2009.10.003.
