The mechanical properties of thermoplastic HDPE composites filled with CF and CNT were studied. Coupling agent surface-treated CF-filled HDPE composites increased their tensile strength and impact strength, which is further increased with the addition of CNT. Coupling agent was proved to play an important role in the improvement of the interfacial adhesion of the CF/HDPE composite. SEM showed that CNT coating-treated CF/HDPE composites show better dispersion of the filler into the matrix.
LiJ. Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites. Appl Surf Sci. 2008Dec 30;255(5), Part 2:2822–2824. doi: 10.1016/j.apsusc.2008.08.013
2.
SongW, GuA, LiangG, . Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites. Appl Surf Sci. 2011Feb 15;257(9):4069–4074. doi: 10.1016/j.apsusc.2010.11.177
3.
BijweJ, RattanR. Influence of weave of carbon fabric in polyetherimide composites in various wear situations. Wear. 2007Sep 10;263(7–12):984–991. doi: 10.1016/j.wear.2006.12.030
4.
SharmaM, BijweJ, MitschangP. Wear performance of PEEK-carbon fabric composites with strengthened fiber–matrix interface. Wear. 2011Jul 29;271(9–10):2261–2268. doi: 10.1016/j.wear.2010.11.055
5.
SharmaM, BijweJ. Influence of fiber–matrix adhesion and operating parameters on sliding wear performance of carbon fabric polyethersulphone composites. Wear. 2011Sep 2;271(11–12):2919–2927. doi: 10.1016/j.wear.2011.06.012
6.
ZhangX, HuangY, WangT. Plasma activation of carbon fibres for polyarylacetylene composites. Surf Coat Technol. 2007Feb 26;201(9–11):4965–4968. doi: 10.1016/j.surfcoat.2006.07.170
7.
WangJ, LiK-X, HeH-W, . Kinetic and thermodynamics analysis of water absorption in unidirectional fiber reinforced composites by polyethersulphone and polyphenylene sulfide. Colloid Surf A. 2011Mar 5;377(1–3):330–335. doi: 10.1016/j.colsurfa.2011.01.009
8.
ZhouXH, SunYS, WangWS. Influences of carbon fabric/epoxy composites fabrication process on its friction and wear properties. J Mater Process Technol. 2009May 1;209(9):4553–4557. doi: 10.1016/j.jmatprotec.2008.10.038
9.
Modesto-LopezLB, BiswasP. Role of the effective electrical conductivity of nanosuspensions in the generation of TiO2 agglomerates with electrospray. J Aerosol Sci. 2010Aug;41(8):790–804. doi: 10.1016/j.jaerosci.2010.04.010
10.
MerinskaD, KubisovaH, KalendovaA, . Processing and properties of polyethylene/montmorillonite nanocomposites. J Thermoplast Compos. 2012Feb;25:115–131. doi: 10.1177/0892705711404939
11.
WuG, TangY, WengR. Dispersion of nano-carbon filled polyimide composites using self-degraded low molecular poly(amic acid) as impurity-free dispersant. Polym Degrad Stabil. 2010Sep;95(9):1449–1455. doi: 10.1016/j.polymdegradstab.2010.06.026
12.
GuptaAP, GuptaV, SaroopUK. Morphological and impact properties of thermo-oxidative degraded polypropylene/metallocene linear low density polyethylene blend systems. Polym-Plast Technol. 2007Aug;46(8):759–766. doi: 10.1080/03602550701274094
13.
SreenivasanPV, KurianP. Mechanical properties and morphology of nitrile rubber toughened polystyrene. Int J Polym Mater. 2007Aug;56(11):1041–1050. doi: 10.1080/00914030701215701
