Abstract
Insufficient micro-lubricant supply during drilling operations results in inadequate heat dissipation and ineffective friction reduction at elevated temperatures, thereby limiting machining efficiency. This study addresses the issue by preparing nanocapsules via a wet chemical method. Chlorinated paraffin (T301), a lubricating agent, was encapsulated within carbon nanotubes (CNTs) to form nanocapsules, which were subsequently used as additives in nanofluids. During drilling, these nanocapsules release T301, enabling a self-lubricating effect that enhances penetration and retention in the cutting zone, thereby improving both cooling and lubrication performance. The mechanical and thermodynamic properties of the nanofluids were characterized, and a series of drilling tests were conducted using these enhanced fluids. The study also analyzed heat transfer in the drilling area and the formation of a lubrication layer influenced by the nanofluids. The nanocapsules demonstrated excellent thermal conductivity and dispersion stability. When drilling 45 steel, the inclusion of nanocapsules resulted in significant improvements: torque was reduced by 35.6%, drilling temperature by 19.3%, surface roughness of the inner hole by 22.7%, and tool wear by 25.5%, compared to the use of commercial emulsions. Surface composition analysis of the drill bit revealed that the self-lubricating effect was due to the rupture of multi-walled carbon nanotubes (MWCNTs) during metal cutting and drilling, which released the T301 lubricant directly into the drilling zone.
Get full access to this article
View all access options for this article.