High-strength low-alloy steels subjected to high heat input welding are susceptible to failure due to low toughness caused by grain coarsening. The effect of TiN on grain refinement in the simulated heat-affected zone (HAZ) was investigated. Because of small amount of Ti addition, abundant dispersed nanoscale TiN precipitates were formed. The TiN precipitates tended to be stable at high temperature and effectively retarded the austenite grain growth by refining the grain size during thermal cycle. Furthermore, the TiN also covered on the surface of Al–Ti complex oxide with MnS and caused low interface energy with ferrite. The acicular ferrite grains nucleated on complex inclusion in austenite grains at intermediate temperature and induced the austenite grain transform to the fine-grained mixed microstructure of acicular ferrite and bainite. The crystallographic grain size became small in the simulated HAZ due to the effective pinning effect and acicular ferrite formation.
KojimaA, YoshiiK, HadaT, . Development of high HAZ toughness steel plates for box columns with high heat input welding. Nippon Steel Tech Rep. 2004; 90:39–44.
3.
RiosPR. Overview no. 62: a theory for grain boundary pinning by particles. Acta Metall. 1987; 35(12):2805–2814. doi: 10.1016/0001-6160(87)90280-X
4.
SasakiM, MatsuuraK, OhsasaK, . Effects of addition of titanium and boron on columnar austenite grain in carbon steel. ISIJ Int. 2009; 49(9):1367–1371. doi: 10.2355/isijinternational.49.1367
5.
BakerTN. Titanium technology in microalloyed steels. 2nd edn. London: The Institute of Materials, Minerals and Mining; 1997.
6.
GladmanT. The physical metallurgy of microalloyed steels. London: The Institute of Materials, Minerals and Mining; 1997.
7.
AkselsenOM, GrongØ, RyumN, . HAZ grain growth mechanisms in welding of low carbon microalloyed steels. Acta Metall. 1986; 34(9):1807–1815. doi: 10.1016/0001-6160(86)90125-2
8.
LeeS, KimBC, LeeDY. Fracture mechanism in coarse grained HAZ of HSLA steel welds. Scripta Metall. 1989; 23(6):995–1000. doi: 10.1016/0036-9748(89)90284-6
9.
PanY-T, LeeJ-L. Development of TiOx-bearing steels with superior heat-affected zone toughness. Mater Des1994; 15(6):331–338. doi: 10.1016/0261-3069(94)90027-2
10.
WanXL, WeiR, WuKM. Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone. Mater Charact. 2010; 61:726–731. doi: 10.1016/j.matchar.2010.04.004
11.
ShiM-H, ZhangP-Y, ZhuF-X. Toughness and microstructure of coarse grain heat affected zone with high heat input welding in Zr-bearing low carbon steel. ISIJ Int. 2014; 54(1):188–192. doi: 10.2355/isijinternational.54.188
12.
KomizoY, TerasakiH. Optical observation of real materials using laser scanning confocal microscopy Part 1 – techniques and observed examples of microstructural changes. Sci Technol Weld Join. 2011; 16:56–60.
13.
WanX-L, WuK-M, HuangG, . In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels. Int J Min Metall Mater. 2014; 21(9):878–885. doi: 10.1007/s12613-014-0984-8
14.
SugiyamaM, ShigesatoG. Development of in situ microstructure observation technique in steel. Nippon Steel Tech Rep. 2005; 91:13–17.
15.
MoonJ, LeeC, UhmS, . Coarsening kinetics of TiN particle in a low alloyed steel in weld HAZ: considering critical particle size. Acta Mater. 2006; 54(4):1053–1061. doi: 10.1016/j.actamat.2005.10.037
16.
NagataMT, SpeerJG, MatlockDK. Titanium nitride precipitation behavior in thin-slab cast high-strength low-alloy steels. Metall Mater Trans A. 2002; 33(10):3099–3110. doi: 10.1007/s11661-002-0294-z
17.
InoueK, OhnumaI, OhtaniH, . Solubility product of TiN in austenite. ISIJ Int. 1998; 38(9):991–997. doi: 10.2355/isijinternational.38.991
18.
MabuchiH, UemoriR, FujiokaM. The role of Mn depletion in intra-granular ferrite transformation in the heat affected zone of welded joints with large heat input in structural steels. ISIJ Int. 1996; 36:1406–1412. doi: 10.2355/isijinternational.36.1406
RicksRA, HowellPR, BarritteGS. The nature of acicular ferrite in HSLA steel weld metals. J Mater Sci. 1982; 17:732–740. doi: 10.1007/BF00540369
21.
ShimJ-H, ByunJ-S, ChoY-W, . Mn absorption characteristics of Ti2O3 inclusions in low carbon steels. Scripta Mater. 2001; 44:49–54. doi: 10.1016/S1359-6462(00)00560-1
22.
ShigesatoG, SugiyamaM. Development of in situ observation technique using scanning ion microscopy and demonstration of Mn depletion effect on intragranular ferrite transformation in low-alloy steel. J Electron Microsc. 2002; 51:359–367. doi: 10.1093/jmicro/51.6.359
23.
JinH-H, ShimJ-H, ChoY-W, . Formation of intragranular acicular ferrite grains in a Ti-containing low carbon steel. ISIJ Int. 2003; 43:1111–1113. doi: 10.2355/isijinternational.43.1111
24.
YamamotoK, HasegawaT, TakamuraJ-I. Effect of boron on intra-granular ferrite formation in Ti-oxide bearing steels. ISIJ Int. 1996; 36(1):80–86. doi: 10.2355/isijinternational.36.80
25.
TomitaY, SaitoN, TsuzukiT, . Improvement in HAZ toughness of steel by TiN-MnS addition. ISIJ Int. 1994; 34(10):829–835. doi: 10.2355/isijinternational.34.829
