The phase transformation from austenite to acicular ferrite in the simulated coarse grained heat affected zone of a high strength low alloy steel was investigated by means of analytical characterisation techniques such as in situ microscopy, transmission electron microscopy and electron backscattered diffraction analysis. The acicular ferrite grains nucleated on inclusions (Zr–Ti oxides) in coarse austenite grain grew in different directions and effectively partitioned coarse austenite grain into several finer and separate regions. The crystallographic grain size became small for coarse austenite grains due to the effective partitioning by acicular ferrite laths or plates.
BhadeshiaH. K. D. H. and HoneycombeR. W. K.: ‘Steels microstructure and properties’, 3rd edn.2006, Oxford, Elsevier Ltd.
2.
KojimaA., YoshiiK., HadaT., SaekiO., IchikawaK., YoshidaY., ShimuraY. and AzumaK.: ‘Development of high HAZ toughness steel plates for box columns with high heat input welding’, Nippon Steel Tech. Rep., 2004, 90, 39–44.
3.
WanX. L., WeiR. and WuK. M.: ‘Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone’, Mater. Charact., 2010, 61, 726–731.
4.
WanX. L., WuK. M., HuangG., WeiR. and ChengL.: ‘In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels’, Int. J. Miner. Metal. Mater., 2014, 21, 878–893.
5.
WanX. L., WuK. M., HuangG. and WeiR.: ‘In situ observations of the formation of fine-grained mixed microstructures of acicular ferrite and bainite in the simulated coarse-grained heated-affected zone’, Steel Res. Int., 2014, 85, 243–250.
6.
RicksR. A., HowellP. R. and BarritteG. S.: ‘The nature of acicular ferrite in HSLA steel weld metals’, J. Mater. Sci., 1982, 17, 732–740.
7.
BabuS. S. and BhadeshiaH. K. D. H.: ‘Stress and the acicular ferrite transformation’, Mater. Sci. Eng. A, 1992, 156, 1–9.
8.
WuK. M.: ‘Three-dimensional analysis of acicular ferrite in a low-carbon steel containing titanium’, Scr. Mater., 2006, 54, 569–574.
9.
GourguesA. F., FlowerH. M. and LindleyT. C.: ‘Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures’, Mater. Sci. Technol., 2000, 16, 26–40.
10.
MiyamotoG., ShinyoshiT., YamaguchiJ., FuruharaT., MakiT. and UemoriR.: ‘Crystallography of intragranular ferrite formed on (MnS+V(C,N)) complex precipitate in austenite’, Scr. Mater., 2003, 48, 371–377.
11.
YukioT., NaokiS., TakeshiT., YoshikuniT. and KentaroO.: ‘Improvement in HAZ toughness of steel by TiN–MnS addition’, ISIJ Int., 1994, 34, 829–835.
12.
ShimJ. H., ByunJ. S., ChoY. W., OhY. J., ShimJ. D. and LeeD. N.: ‘Mn absorption characteristics of Ti2O3 inclusions in low carbon steels’, Scr. Mater., 2001, 44, 49–54.
13.
ZhangS., HattoriN., EnomotoM. and TaruiT.: ‘Ferrite nucleation at ceramic/austenite interfaces’, ISIJ Int., 1996, 36, 1301–1309.
14.
GuoA. M., LiS. R., GuoJ., LiP. H., DingQ. F., WuK. M. and HeX. L.: ‘Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel’, Mater. Charact., 2008, 59, 134–139.
15.
LiN., WuK. M., HeT. Q., WangH. H., AnatoliiT., YuH. W. and XiongY. Z.: ‘Effect of feeding Ca–Mg–RE–Zr composite cored wire during refining of liquid steel on weldability of ultrahigh strength wear resistant steels’, Sci. Technol. Weld. Join., 2014, 19, 265–270.
16.
ChengL. and WuK. M.: ‘New insights into intragranular ferrite in a low-carbon low alloy steel’, Acta Mater., 2009, 57, 3754–3762.
17.
FuentesM. D. and GutiérrezI.: ‘Analysis of different acicular ferrite microstructures generated in a medium carbon molybdenum steel’, Mater. Sci. Eng. A, 2003, 363, 316–324.
18.
BhadeshiaH. K. D. H.: ‘Bainite in steels’, 3rd edn; 2006, Oxford, Elsevier Ltd.
19.
KomizoY. and TerasakiH.: ‘Optical observation of real materials using laser scanning confocal microscopy. Part 1: techniques and observed examples of microstructural changes’, Sci. Technol. Weld. Join., 2011, 16, 56–60.
20.
TakadaA., TerasakiH. and KomizoY.: ‘Effect of aluminium content on acicular ferrite formation in low carbon steel weld metals’, Sci. Technol. Weld. Join., 2013, 18, (2), 91–97.
21.
ZhangD., TerasakiH. and KomizoY.: ‘In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C–Mn steel’, Acta Mater., 2010, 58, 1369–1378.
22.
BlahaP., SchwarzK., MadsenG. K. H., KvasnickaD. and LuitzJ.: ‘An augmented plane wave+local orbitals program for calculating crystal properties’; 2012, Vienna, Vienna University of Technology.
23.
PerdewJ. P., BurkeK. and ErnzerhofM.: ‘Generalized gradient approximation made simple’, Phys. Rev. Lett., 1996, 77, 3865–3868.
24.
PerdewJ. P., KurthS., ZupanA. and BlahaP.: ‘Accurate density functional with correct formal properties: a step beyond the generalized gradient approximation’, Phys. Rev. Lett., 1999, 82, 2544–2547.
25.
ZhangZ. and FarrarR. A.: ‘Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals’, Mater. Sci. Technol., 1996, 12, 237–260.
26.
WanX. L., WangH. H., ChengL. and WuK. M.: ‘The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals’, Mater. Charact., 2012, 67, 41–51.
27.
LajavardiM., KenneyD. J., LinS. H. and ChinJ.: ‘Time-resolved phase transitions of the nanocrystalline cubic to submicron monoclinic phase in Mn2O3–ZrO2’, J. Chin. Chem. Soc., 2000, 47, 1055–1064.
28.
LiY., WanX. L., ChengL. and WuK. M.: ‘First-principles calculation of the interaction of Mn with ZrO2 and its effect on the formation of ferrite in high-strength low-alloy steels’, Scr. Mater., 2014, 75, 78–81.
