The relationship between the particle size and porosity of an Fe-based amorphous coating that is fabricated using a high-velocity oxygen fuel (HVOF) process was revealed by both numerical and experimental methods. A computational fluid dynamics model was implemented in order to understand the gas-flow field and the behaviour of in-flight particles with different particle sizes during the HVOF spray process. By analysing both particle velocity and temperature, the optimal particle size range (20–30 μm) to achieve low-porosity coatings was predicted. These calculations were experimentally verified by the production of a low porosity (0.95%), Fe-based amorphous coating that was fabricated by HVOF using the predicted optimal particle size.
PawlowskiL.The science and engineering of thermal spray coatings. 2nd ed. Chichester
: John Wiley & Sons; 2008.
6.
DavisJR.Handbook of thermal spray technology. Materials Park (OH)
: ASM International; 1997.
7.
ZhangC, GuoRQ, YangY, Influence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating. Electrochim Acta. 2011;56:6380–6388. doi: 10.1016/j.electacta.2011.05.020
8.
ZhangSD, ZhangWL, WangaSG, Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behavior. Corros Sci. 2015;93:211–221. doi: 10.1016/j.corsci.2015.01.022
9.
ZhangSD, WuJ, QiWB, Effect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel. Corros Sci. 2016;110:57–70. doi: 10.1016/j.corsci.2016.04.021
HansonTC, SettlesGS.Particle temperature and velocity effects on the porosity and oxidation of an HVOF corrosion-control coating. J Therm Spray Technol2003;12:403–415. doi: 10.1361/105996303770348276
12.
LiMH, ChristofidesPD.Computational study of particle in-flight behavior in the HVOF thermal spray process. Chem Eng Sci. 2006;61:6540–6552. doi: 10.1016/j.ces.2006.05.050
13.
ChengD, XuQ, TrapagaG, The effect of particle eize and morphology on the in-flight behavior of particles during high-velocity oxyfuel thermal spraying. Metall Mater Trans B. 2001;32:525–535. doi: 10.1007/s11663-001-0037-3
14.
KamnisS, GuS, ZeoliN.Mathematical modelling of inconel 718 particles in HVOF thermal spraying. Surf Coat Technol. 2008;202:2715–2724. doi: 10.1016/j.surfcoat.2007.10.006
15.
PanJJ, HuSS, YangLJ, Numerical analysis of flame and particle behavior in an HVOF thermal spray process. Mater Des. 2016;96:370–376. doi: 10.1016/j.matdes.2016.02.008
16.
ShiD, LiMH, ChristofidesPD.Diamond jet hybrid HVOF thermal spray: rule-based modeling of coating microstructure. Ind Eng Chem Res. 2004;43:3653–3665. doi: 10.1021/ie030560h
17.
LiMH, ShiD, ChristofidesPD.Modeling and control of HVOF thermal spray processing of WC-Co coatings. Powder Technol. 2005;156:177 –1194. doi: 10.1016/j.powtec.2005.04.011
18.
Ghafouri-AzarR, MostaghimiJ, ChandraS, A stochastic model to simulate the formation of a thermal spray coating. J Therm Spray Technol. 2003;12:53–69. doi: 10.1361/105996303770348500
19.
MostaghimiJ, ChandraS, Ghafouri-AzarR, Modeling thermal spray coating processes: a powerful tool in design and optimization. Surf Coat Technol. 2003;163–164:1–11. doi: 10.1016/S0257-8972(02)00686-2
OtsuboF, KishitakeK.Corrosion resistance of Fe-16%Cr-30%Mo-(C,B,P) amorphous coatings sprayed by HVOF and APS processes. Mater Trans. 2005;46:80–83. doi: 10.2320/matertrans.46.80
22.
BranaganDJ, SwankWD, MeachamBE.Maximizing the glass fraction in iron-based high velocity oxy-fuel coatings. Metall Mater Trans A. 2009;40A:1307–1313.
23.
MaHR, ChenXY, LiJW, Fe-based amorphous coating with high corrosion and wear resistance. Surf Eng. 2017;33:56–62. doi: 10.1080/02670844.2016.1176718
24.
ZoisaD, LekatouaA, VardavouliasbM.Preparation and characterization of highly amorphous HVOF stainless steel coatings. J Alloys Compd. 2010;504:S283–S287. doi: 10.1016/j.jallcom.2010.02.062
25.
FarmerJC, HaslamJJ, DaySD, Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe49.7Cr17.7Mn1.9Mo7.4 W1.6B15.2C3.8Si2.4. J Mater Res. 2007;22:2297–2311. doi: 10.1557/jmr.2007.0291
26.
ZhouZ, WangL, WangFC, Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying. Surf Coat Technol. 2009;204:563–570. doi: 10.1016/j.surfcoat.2009.08.025
27.
FarmerJ, ChoiJ-S, SawC, Iron-based amorphous metals: high-performance corrosion-resistant material development. Metall Mater Trans A. 2009;40:1289–1305. doi: 10.1007/s11661-008-9779-8
28.
LiML, ShiD, ChristofidesPD.Diamond jet hybrid HVOF thermal spray: gas-phase and particle behavior modeling and feedback control design. Ind Eng Chem Res. 2004;43:3632–3652. doi: 10.1021/ie030559i
KamnisS, GuS.Numerical modelling of propane combustion in a high velocity oxygen-fuel thermal spray gun. Chem Eng Process. 2006;45:246–253. doi: 10.1016/j.cep.2005.06.011
31.
LiML, ChristodesPD.Feedback control of HVOF thermal spray process accounting for powder size distribution. J Therm Spray Technol. 2004;13:108–120. doi: 10.1007/s11666-004-0055-1
32.
KhanMN, ShamimT.Investigation of a dual-stage high velocity oxygen fuel thermal spray system. Appl Energy. 2014;130:853–862. doi: 10.1016/j.apenergy.2014.03.075
33.
MontavonG, CoddetC, BerndtCC, Microstructure index to quantify thermal spray deposit microstructures using image analysis. J Therm Spray Technol. 1998;7:229–241. doi: 10.1361/105996398770350972
34.
DeshpandeS, KulkarniA, SampathS, Application of image analysis for characterization of porosity in thermal spray coatings and correlation with small angle neutron scattering. Surf Coat Technol. 2004;187:6–16. doi: 10.1016/j.surfcoat.2004.01.032
35.
TabbaraH, GuS.A study of liquid droplet disintegration for the development of nanostructured coatings. Aiche J. 2012;58:3533–3544. doi: 10.1002/aic.13755
36.
VoggenreiterHF, HuberS, BeyerS, Influence of particle velocity and molten phase on the chemical and mechanical properties of HVOF-sprayed structural coatings of alloy 316L. Materials Park (OH)
: ASM International; 1995.
37.
VoggenreiterHF, HuberH, SpiesHJ, HVOF sprayed alloy In718 -the influence of process parameters on the microstructure and mechanical properties. Materials Park (OH)
: ASM International; 1997.
38.
GilL, StaiaMH.Influence of HVOF parameters on the corrosion resistance of NiWCrBSi coatings. Thin Solid Films. 2002;446:420–421.
39.
HearleyJA, LittleJA, SturgeonJA.The effect of spray parameters on the properties of high velocity oxy-fuel NiAl intermetallic coatings. Surf Coat Technol. 2000;123:210–218. doi: 10.1016/S0257-8972(99)00511-3
