It is found that heat treatment can improve the microstructure and properties of the coating. In this paper, the Fe-Cr-Mo-B-C amorphous composite coatings fabricated by laser cladding technology were heat treated at different temperatures. The effects of heat treatment temperature on the crystallisation, porosity, microhardness, and corrosion resistance of coatings were investigated. The experimental results show that the amorphous content and porosity after heat treatment, the comprehensive properties are improved, and the coating defects are solved. Both the amorphous content and the porosity affect the corrosion resistance of the coatings. The smaller the porosity, the higher the amorphous content, and the stronger the corrosion resistance of the coating. When the difference in amorphous content is small, the porosity of the coating becomes the dominant factor affecting the corrosion resistance of the coating. The experimental results shows that the best optimum heat treatment temperature for the coatings is 200°C.
LuoQSunYJJiaoJFormation and tribological behavior of AC-HVAF-sprayed nonferromagnetic Fe-based amorphous coatings. Surf Coat Tech. 2018;334:253–260.
2.
LiYCZhangCXingWDesign of Fe-based bulk metallic glasses with improved wear resistance. ACS Appl Mater Inter. 2018;10(49):43144–43155.
3.
Sharma RKDas RKKumar SR.Effect of chromium–titanium on corrosion and erosion of HVOF coating. Surf Eng. 2022;38(4):366–374.
4.
SharmaRKDasRKKumarSR.Microstructure, mechanical and tribological properties of high velocity oxy fuel thermal spray coating: A review. Materialwiss Werkst. 2023;54(1):90–97.
5.
SharmaRKDasRKKumarSR.Effect of varying chromium and titanium content on corrosion, mechanical and solid particle erosion properties of iron alloy based coating. Materialwiss Werkst. 2022;53(6):675–685.
6.
Al-AbboodiHFanHQMhmoodIAThe dry sliding wear rate of a Fe-based amorphous coating prepared on mild steel by HVOF thermal spraying. J Mater Res Technol. 2022;18:1682–1691.
7.
LiangDDZhouYHLiuXDWettability and corrosion performance of arc-sprayed Fe-based amorphous coatings. Surf Coat Tech. 2022;433:128129.
8.
CuiSZhaiHMLiWSMicrostructure and corrosion resistance of Fe-based amorphous coating prepared by detonation spray. Surf Coat Tech. 2020;399:126096.
9.
LiKYLiangJZhouJS.Preparation and characterization of laser cladded FeCrMoBSi amorphous composite coatings. Surf Coat Tech. 2021;423:127520.
10.
SharmaRKDasRKKumarSR.Microstructure, adhesion and erosion properties of Fe-Cr-Ti-Mo-C-Si coating with varying titanium. Mater Today Commun. 2021;26:101826.
11.
QuaziMMFazalMAHaseebASMAEffect of rare earth elements and their oxides on tribo-mechanical performance of laser claddings: A review. J Rare Earth. 2016;34(6):549–564.
12.
LiuJYuHChenC. Research and development status of laser cladding on magnesium alloys: a review. Opt Laser Eng. 2017;93:195–210.
13.
WangSLZhangZYGongYBMicrostructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding. J Alloy Compd. 2017;728:1116–1123.
14.
ZhuQJQuSYWangXHSynthesis of Fe-based amorphous composite coatings with low purity materials by laser cladding. Appl Surf Sci. 2007;253(17):7060–7064.
DaiNWZhangLCZhangJDistinction in corrosion resistance of selective laser melted Ti-6Al-4 V alloy on different planes. Corros Sci. 2016;111:703–710.
17.
JiaoJLuoQWeiXInfluence of sealing treatment on the corrosion resistance of Fe-based amorphous coatings in HCl solution. J Alloy Compd. 2017;714:356–362.
18.
WangHZChengYHYangJY.Influence of laser remelting on organization, mechanical properties and corrosion resistance of Fe-based amorphous composite coating. Surf Coat Tech. 2021;414:127081.
19.
GhotbiMYAbbasiF.Effect of the second heat treatment on the porosity and conductivity of a template-synthesized carbon material for use in supercapacitor electrodes. Solid State Sci. 2022;128:106871.
20.
Al-ShelkamySAAbu HashishHMSalamaE.Influence of heat treatment on the mechanical and the lubricant wear characteristics of stainless-steel grades against 5 wt% NaCl as industrial shielding materials. Appl Radiat Isotopes. 2022;188:110361.
21.
MiaoYSFangCXShiDCoupling effects of boron nitride and heat treatment on crystallization, mechanical properties of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV). Polymer. 2022;252:12496.
22.
LiZZLuanYHuJBBamboo heat treatments and their effects on bamboo properties. Constr Build Mater. 2022;331:127320.
23.
ChenJZhaoGLZhangYGMetastable phase evolution and nanoindentation behavior of amorphous Ni-Cu-P coating during heat treatment process. J Alloy Compd. 2019;805:597–608.
24.
HuangFKangJJYueWEffect of heat treatment on erosion-corrosion of Fe-based amorphous alloy coating under slurry impingement. J Alloy Compd. 2020;820:153132.
25.
ZhengZBZhengYGSunWHEffect of heat treatment on the structure, cavitation erosion and erosion-corrosion behavior of Fe-based amorphous coatings. Tribol Int. 2015;90:393–403.
26.
LiCYWangHBDingJQEffects of heat treatment on HVOF-sprayed Fe-based amorphous coatings. Surf Eng. 2021;37(5):590–598.
27.
CoimbrãoDDZeponGKogaGYCorrosion properties of amorphous, partially, and fully crystallized Fe68Cr8Mo4Nb4B16 alloy. J Alloy Compd. 2020;826:154123.
28.
NayakSKKumarAPathakAMulti-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying. J Alloy Compd. 2020;825:154120.
29.
LiCYZhaiJSTianLFabrication of Fe-based amorphous composite coating by laser cladding. J Non-Cryst Solids. 2022;589:121648.
30.
BorregoJMBlázquezJSLozano-PérezSStructural relaxation in Fe(Co)SiAlGaPCB amorphous alloys. J Alloy Compd. 2014;584:607–610.
31.
KangYHChenYMWenYXEffects of structural relaxation and crystallization on the corrosion resistance of an Fe-based amorphous coating. J Non-Cryst Solids. 2020;550:120378.
32.
LiuWHShieuFSHsiaoWT.Enhancement of wear and corrosion resistance of iron-based hard coatings deposited by high-velocity oxygen fuel (HVOF) thermal spraying. Surf Coat Tech. 2014;249:24–41.
33.
KumarANayakSKBijalwanPOptimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating. Surf Coat Tech. 2019;370:255–268.
34.
ShuFYLiuSZhaoHYStructure and high-temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high-entropy alloy powder. J Alloy Compd. 2018;731:662–666.
35.
YangYZhangCPengYEffects of crystallization on the corrosion resistance of Fe-based amorphous coatings. Corros Sci. 2012;59:10–19.
36.
GuoRQZhangCYangYCorrosion and wear resistance of a Fe-based amorphous coating in underground environment. Intermetallics. 2012;30:94–99.
37.
ZhouSFXuYBLiaoBQEffect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding. Opt Laser Technol. 2018;103:8–16.
38.
YangYJFanXDWangFLEffect of Nb content on corrosion behavior of Ti-based bulk metallic glass composites in different solutions. Appl Surf Sci. 2019;471:108–117.
39.
RenLChengYFengSExperimental study on corrosion-fouling relationship of Ni-W-P composite coating surface of heat exchanger. Surf Topogr-Metrol. 2019;7(1):15011.
40.
ZhangCChanKCWuYPitting initiation in Fe-based amorphous coatings. Acta Mater. 2012;60(10):4152–4159.
41.
QinYJWuYPZhangJFLong-term corrosion behavior of HVOF sprayed FeCrSiBMn amorphous/nanocrystalline coating. T Nonferr Metal Soc. 2015;25(4):1144–1150.
42.
HeXSongRGKongDJ.Microstructure and corrosion behaviours of composite coatings on S355 offshore steel prepared by laser cladding combined with micro-arc oxidation. Appl Surf Sci. 2019;497:143703.
43.
WeiJDongJHZhouYTInfluence of the secondary phase on micro galvanic corrosion of low carbon bainitic steel in NaCl solution. Mater Charact. 2018;139:401–410.
44.
WangHZChengYHZhangXCEffect of laser scanning speed on microstructure and properties of Fe based amorphous/ nanocrystalline cladding coatings. Mater Chem Phys. 2020;250:123091.
