Theoretical aspects of kinetics and transport phenomena during the hillocks formation and growth in thin Al films are discussed. Following the suggested methodology, the conceptual relationship of step by step linear and/or parabolic law for hillock volume changes ΔV with time t:
(where n = 1 and/or ½; K is the changeable coefficient and (i) is the appropriate time sequence) is proposed.
Finally, using the experimental measurements from S. J. Hwang, Y. D. Lee, Y. B. Park, J. H. Lee, C. O. Jeong, and Y. C. Joo: Scripta Mater., 2006, 54, 1841–1846, illustrative calculation results of the proposed concept are presented.
ZhongZ. W., WangJ. H.: ‘Uniformity and characterisation of PVD aluminium films’, Surf. Eng., 2005,
21, 119–124. doi: 10.1179/174329405X40939
2.
ParkI. M., HwangS. J., LeeJ. H., and JooY. C.: ‘Effect of effective modulus on hillock formations in Al lines on glass’, Met. Mater. Int., 2009,
15, 661–664. doi: 10.1007/s12540-009-0661-z
3.
ChaudhariP.: ‘Hillock growth in thin films’, J. Appl. Phys., 1974,
45, 4339–4346. doi: 10.1063/1.1663054
4.
IwamuraE., OhnishiT., YoshikawaK.: ‘A study of hillock formation on Al-Ta alloy films for interconnections of TFT-LCDs’, Thin Solid Films, 1995,
270, 450–455. doi: 10.1016/0040-6090(96)80076-9
5.
KimD. K., NixW. D., DealM. D. and PlummerJ. D.: ‘Creep-controlled diffusional hillock formation in blanket aluminum thin films as a mechanism of stress relaxation’, J. Mater. Res., 2000,
15, 1709–1718. doi: 10.1557/JMR.2000.0246
6.
HwangS. J., LeeY. D., ParkY. B., LeeJ. H., JeongC. O., and JooY. C.: ‘In situ study of stress relaxation mechanisms of pure Al thin films during isothermal annealing’, Scripta Mater., 2006,
54, 1841–1846. doi: 10.1016/j.scriptamat.2006.02.024
7.
HwangS. J., LeeY. D., JeongC. O. and JooY. C.: ‘Effect of film thickness and annealing temperature on hillock distributions in pure Al films’, Scripta Mater., 2007,
56, 17–20. doi: 10.1016/j.scriptamat.2006.09.001
8.
HwangS. J., NixW. D. and JooY. C.: ‘A model for hillock growth in Al thin films controlled by plastic deformation’, Acta Mater., 2007,
55, 5297–5301. doi: 10.1016/j.actamat.2007.05.046
9.
BerlaA., JooY. C. and NixW. D.: ‘A model for power law creep controlled hillock growth’, Mater. Sci. Eng. A, 2008,
488, 594–600. doi: 10.1016/j.msea.2007.11.049
10.
ChristianJ.: ‘The theory of transformations in metals and alloys, part I’, 1981, New York
, Pergamon Press.
11.
GottsteinG.: ‘Physical foundations of materials science’, 2004, Berlin
, Springer.
12.
KolmogorovA. N.: ‘On the statistic theory of metal crystallization’, Izv. Akad. Nauk. USSR-Ser.Matemat., 1937,
1, 355–359.
13.
JohnsonW. A. and MehlR. F.: ‘Reaction kinetics in processes of nucleation and growth’, Trans. AIME., 1939,
135, 396–415.
14.
AvramiM.: ‘Granulation, phase change, and microstructure kinetics of phase change. III’, J. Chem. Phys., 1941,
9, 177–184. doi: 10.1063/1.1750872
15.
VandermeerR. A. and JensenD. J.: ‘Microstructural path and temperature dependence of recrystallization in commercial aluminum’, Acta Mater., 2001,
22, 2083–2094. doi: 10.1016/S1359-6454(01)00074-X
16.
WuS., GuoQ., WuS. and ZhaoC.: ‘Modified curvature method for residual thermal stress estimation in coatings’, Surf. Eng., 2014,
30, 866–870. doi: 10.1179/1743294414Y.0000000343
17.
SarobolP., BlendellJ. E. and HandwerkerC. A.: ‘Whisker and hillock growth via coupled localized Coble creep, grain boundary sliding, and shear induced grain boundary migration’, Acta Mater., 2013,
61, 1991–2003. doi: 10.1016/j.actamat.2012.12.019
18.
AmramD., KlingerL., GazitN., GluskaH. and RabkinE.: ‘Grain boundary grooving in thin films revisited: the role of interface diffusion’, Acta Mater., 2014,
69, 386–396. doi: 10.1016/j.actamat.2014.02.008
19.
OhC., NagaoS., SugaharaT. and SuganumaK.: ‘Hillock growth dynamics for Ag stress migration bonding’, Mater. Lett., 2014,
137, 170–173. doi: 10.1016/j.matlet.2014.09.006
20.
PoirierD. R. and GeigerG. H.: ‘Transport phenomena in materials processing’, 1994, Warrendale
, TMS.
21.
RaićK. T.: ‘An approach to laminar phenomena occurring on external and internal surfaces of solid specimens’, Interface Sci., 2000,
8, 85–94. doi: 10.1023/A:1008791522694
22.
RaićK. T.: ‘Parallel glide: flow of dislocations with internal stress source/sink distribution’, Sci. Technol. Adv. Mater., 2008,
9, 015008. doi: 10.1088/1468-6996/9/1/015008
23.
SinghS., GuptaD., JainV. and SharmaA. K.: ‘Microwave processing of materials and applications in manufacturing industries: a review’, Mater.Manuf. Proc., 2015,
30, 1–29. doi: 10.1080/10426914.2014.952028
