Spark Plasma Sintering (SPS) is an innovative sintering technique, whereby many of the beneficial effects of this process on sintering are still elusive. To allow for the detailed investigations of the SPS process, a custom experimental set-up and a corresponding finite element (FE) model was developed. The miniaturised setup allows for very high current intensities, custom pulse patterns, a wide pressure range and dilatometric measurements. The FE model was employed to calculate the temperature field in the set-up and the sintering specimen itself. A very good correlation of the temperature, current and voltage over the entire process was observed. Our investigations show that the contact conductivities have a significant impact on the process temperature. Also, the imperfect contacts at the interfaces between the graphite foil and the real specimen may lead to a significant variance of the currents necessary to obtain the desired sintering temperature.
OrrùR, LicheriR, LocciAM, . Consolidation/synthesis of materials by electric current activated/assisted sintering. Mater Sci Eng R Rep. 2009;63:127–287. doi:10.1016/j.mser.2008.09.003.
5.
MunirZA, Anselmi-TamburiniU, OhyanagiM.The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. J Mater Sci. 2006;41:763–777. doi:10.1007/s10853-006-6555-2.
6.
CollardC, TrzaskaZ, DurandL, . Theoretical and experimental investigations of local overheating at particle contacts in spark plasma sintering. Powder Technol. 2017;321:458–470. doi:10.1016/j.powtec.2017.08.033.
7.
MamedovV.Spark plasma sintering as advanced PM sintering method. Powder Metall. 2002;45:322–328. doi:10.1179/003258902225007041.
8.
ZadraM, CasariF, GirardiniL, . Spark plasma sintering of pure aluminium powder: mechanical properties and fracture analysis. Powder Metall. 2007;50(1):40–45. doi:10.1179/174329007X186417.
9.
YamanogluR, BradburyW, KarakulakE, . Characterisation of nickel alloy powders processed by spark plasma sintering. Powder Metall. 2014;57(5):380–386. doi:10.1179/1743290114Y.0000000088.
10.
TrappJ, SemenovAS, NötheM, . Fundamental principles of spark plasma sintering of metals: part III – densification by plasticity and creep deformation. Powder Metall. 2020;63(5):329–337. doi:10.1080/00325899.2020.1834748.
11.
HulbertDM, AndersA, DudinaDV, . The absence of plasma in spark plasma sintering. J Appl Phys2008;104(3):033305–7. doi:10.1063/1.2963701.
12.
FabrègueD, PiallatJ, MaireE, . Spark plasma sintering of pure iron nanopowders by simple route. Powder Metall. 2012;55:76–79. doi:10.1179/1743290111Y.0000000004.
13.
ZavaliangosA, ZhangJ, KrammerM, . Temperature evolution during field activated sintering. Mater Sci Eng. A. 2004;379:218–228. doi:10.1016/j.msea.2004.01.052.
14.
VanmeenselK, LaptevA, HennickeJ, . Modelling of the temperature distribution during field assisted sintering. Acta Mater. 2005;53:4379–4388. doi:10.1016/J.ACTAMAT.2005.05.042.
15.
Anselmi-TamburiniU, GennariS, GarayJE, . Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions. Mater Sci Eng A. 2005;394:139–148. doi:10.1016/J.MSEA.2004.11.019.
16.
MuñozS, Anselmi-TamburiniU.Parametric investigation of temperature distribution in field activated sintering apparatus. Int J Adv Manuf Technol. 2013;65:127–140. doi:10.1007/s00170-012-4155-7.
17.
PaviaA, DurandL, AjustronF, . Electro-thermal measurements and finite element method simulations of a spark plasma sintering device. J Mater Process Technol. 2013;213:1327–1336. doi:10.1016/j.jmatprotec.2013.02.003.
18.
AchenaniY, SaâdaouiM, CheddadiA, . Finite element modeling of spark plasma sintering: application to the reduction of temperature inhomogeneities, case of alumina. Mater Des. 2017;116:504–514. doi:10.1016/j.matdes.2016.12.054.
19.
GiuntiniD, OlevskyEA, Garcia-CardonaC, . Localized overheating phenomena and optimization of spark-plasma sintering tooling design. Materials (Basel). 2013;6:2612–2632. doi:10.3390/ma6072612.
20.
ExnerHE.Grundlagen von sintervorgängen. Berlin/Stuttgart: Gebrüder Borntraeger; 1978.
21.
FreiJM, Anselmi-TamburiniU, MunirZA.Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method. J Appl Phys. 2007;101:114914, doi:10.1063/1.2743885.
22.
SchütteP, HillH, MollH, . Densification of high wear and corrosion resistant steels by electro discharge sintering. Proceedings of HIP 2011, Kobe, Japan; Editor: Prof. Kozo Ishizaki, 12–14 April 2011; pp. 145–150.
23.
SaundersT, GrassoS, ReeceMJ.Plasma formation during electric discharge (50 V) through conductive powder compacts. J Eur Ceram Soc. 2015;35:871–877. doi:10.1016/j.jeurceramsoc.2014.09.022.
24.
TrappJ, KiebackB.Temperature distribution in metallic powder particles during initial stage of field-activated sintering. J Am Ceram Soc. 2015;98:3547–3552. doi:10.1111/jace.13757.
25.
RogachevAS, VadchenkoSG, KudryashovVA, . Direct observation of processes at particle-to-particle contacts during electric pulse consolidation of a titanium powder. Dokl Phys Chem. 2019;488:151–153. doi:10.1134/S001250161910004X.
26.
TrappJ, SemenovAS, EberhardtO, . Fundamental principles of spark plasma sintering of metals: part II – about the existence or non-existence of the ‘spark plasma effect’. Powder Metall. 2020;63:312–328. doi:10.1080/00325899.2020.1829349.
27.
TrappJ, KiebackB.Fundamental principles of spark plasma sintering of metals: part I – joule heating controlled by the evolution of powder resistivity and local current densities. Powder Metall. 2019;62:297–306. doi:10.1080/00325899.2019.1653532.
28.
SemenovAS, TrappJ, NötheM, . Experimental and numerical analysis of the initial stage of field-assisted sintering of metals. J Mater Sci. 2017;52(3):1486–1500. doi:10.1007/s10853-016-0444-0.
29.
SemenovAS, TrappJ, NötheM, . Thermo-electro-mechanical modeling, simulation and experiments of field-assisted sintering. J Mater Sci. 2019;54(15):10764–10783. doi:10.1007/s10853-019-03653-y.
30.
ZinovievVE.Thermo-physical properties of metals at high temperatures. Moscow: Metalurgia; 1989.
VanmeenselK, LaptevA, HennickeJ, . Modelling of the temperature distribution during field assisted sintering. Acta Mater. 2005;53:4379–4388. doi:10.1016/j.actamat.2005.05.042.
33.
SergeevOA, ShashkovAG, UmanskiiAS.Thermophysical properties of quartz glass. J Eng Phys. 1982;43:1375–1383. doi:10.1007/BF00824797.
34.
SemenovAS, TrappJ, NötheM, . Thermo-electro-mechanical modeling of spark plasma sintering processes accounting for grain boundary diffusion and surface diffusion. Comput Mech. 2021;67(5):1395–1407. doi:10.1007/s00466-021-01994-7.
35.
SemenovAS, TrappJ, NötheM, . Multi-physics simulation and experimental validation of the densification of metals by spark plasma sintering. Adv Eng Mater. 2023 (submitted).
