Sage Journals: Discover world-class research

Open access

Research article

First published 2016-3

Springback prediction of three-dimensional variable curvature tube bending

Shen Zhang, Jianjun Wu

Advances in Mechanical Engineering

Open access

Research article

First published 2021-5

Wall thinning behaviors of high strength 0Cr21Ni6Mn9N tube in numerical control bending considering variation of elastic modulus

Jun Fang, Fang Ouyang, Shiqiang Lu [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2022-10

Wall thinning characteristics and prediction in numerical control bending of high strength Ti-3Al-2.5V tube

Jun Fang, Shiqiang Lu, Kelu Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2021-11

Variation of elastic modulus of high strength 21-6-9 tube and its influences on forming quality in numerical control rotary draw bending

Jun Fang, Fang Ouyang, Shiqiang Lu [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2015

Springback law of high-strength 21-6-9 stainless steel tube in numerical control bending under different process parameters

Jun Fang, Shiqiang Lu, Kelu Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2026-2

Effect of mandrel position on bending quality in the rotary draw bending process

Bahadır Ozcan, Zafer Evis, Fahrettin Ozturk

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2025-12

Defect control for the stretch-bending forming of tube profile

Zhong Xi, Zhuangkun Zhao, Ruixue Zhai [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2014-11

Optimal design of process parameters of rotary-draw bending process for thin-walled rectangular tube of aluminum alloy

Gangyao Zhao, Yuli Liu, Ranyang Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2002-3

Out of roundness distortion of bearing rings owing to internal stresses from tube bending

A. Thuvander

Materials Science and Technology

Free access

Research article

First published 2012-2

Rotary draw bending of small diameter copper tubes: predicting the quality of the cross-section

A Mentella, M Strano

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results