Sage Journals: Discover world-class research

Free access

Research article

First published 2016-1

Machining of curved geometries with constant engagement tool paths

K A Desai, P V M Rao

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2009-11

The Effect of Tool Geometry on the Machinability of Polyamide During Precision Turning

Leonardo R. Silva, J. Paulo Davim

Journal of Composite Materials

Free access

Research article

First published 2012-9

Investigation on tooling geometrical effects of micro tools and the associated micro milling performance

Tao Wu, Kai Cheng, Richard Rakowski

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

The effects of tool geometry on surface integrity in hard turning of ball bearing inner raceways

Gökhan Sağır, Adem Çiçek, Ozan Müştak [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2003-8

The effects of tool geometry change on shearing edge finish in fine-blanking of different materials

Y C Leung, L C Chan, C H Cheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2016-1

Experimental analysis of special tool geometries when drilling woven and multidirectional CFRPs

Norberto Feito, Antonio Diaz-Álvarez, José L Cantero [...]

Journal of Reinforced Plastics and Composites

Free access

Research article

First published 2012-4

Friction stir welding of aluminum alloy with varying tool geometry and process parameters

P Biswas, D A Kumar, N R Mandal

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-1

The influence of tool geometry on the thermo-mechanical and microstructural behaviour in friction stir welding of AA5086

H Jamshidi Aval, S Serajzadeh, A H Kokabi

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2019-8

Investigation of tool geometry in nanoscale cutting single-crystal copper by molecular dynamics simulation

Houfu Dai, Hao Du, Jianbin Chen [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2013-5

Analysis of tool geometry in dissimilar Al alloy friction stir welds using optical microscopy and serial sectioning

H Izadi, J Fallu, A Abdel-Gwad [...]

Science and Technology of Welding and Joining

Search results