Sage Journals: Discover world-class research

Retricted access

Research article

First published 2018-2

A weaving machine for three-dimensional Kagome reinforcements

Gang Liu, Kiju Kang

Textile Research Journal

Retricted access

Research article

First published 2020-7

Route selection for a three-dimensional elevator using deep reinforcement learning

Ahmad Hammoudeh

Building Services Engineering Research & Technology

Open access

Review article

First published 2019

Engineering of three-dimensional near-net-shape weave structures for high technical performance in carbon fibre–reinforced plastics

Stefan Schindler, Hans-Jürgen Bauder, Jürgen Wolfrum [...]

Journal of Engineered Fibers and Fabrics

Retricted access

Research article

First published 1989-08

Effect of Fiber Reinforcement Geometry on Single-Shear and Fracture Behavior of Three-Dimensionally Braided Glass/Epoxy Composite Pins

Sanjiv R. Malkan, Frank K. Ko

Journal of Composite Materials

Retricted access

Research article

First published 2024-4

Experimental and numerical study of the three-dimensional temperature field in the arch ribs of the reinforced concrete ribbed arch bridge during construction

Zhongchu Tian, Zujun Zhang, Zhengqian Wu [...]

Advances in Structural Engineering

Retricted access

Other

First published 2011-1

Modeling three-dimensional fabrics and three-dimensional reinforced composites: challenges and solutions

SV Lomov, G. Perie, DS Ivanov [...]

Textile Research Journal

Retricted access

Research article

First published 2025-6

Three-dimensional auxetic woven fabric structure with in-plane negative Poisson’s ratio for composite reinforcement: A finite-element analysis

Muhammad Zeeshan, Ehsan Etemadi, Li Li [...]

Textile Research Journal

Retricted access

Research article

First published 2000

Three-Dimensional Analysis of Continuously Reinforced Concrete Pavements

Seong-Min Kim, Moon C. Won, B. Frank McCullough

Transportation Research Record: Journal of the Transportation Research Board

Free access

Research article

First published 2020-1

An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation

Behnam Akhoundi, Amir Hossein Behravesh, Arvin Bagheri Saed

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-10

Development of three-dimensional woven weft interlock carbon-fiber-reinforced plastic composites and experimental investigation on their out-of-plane flexural performance

Yajun Liu, Hong Xia, Toshiaki Natsuki [...]

Journal of Composite Materials

Search results