Sage Journals: Discover world-class research

Retricted access

Research article

First published 2021-4

Monitoring and modeling of part thickness evolution in vacuum infusion process

Baris Caglar, Mert Hancioglu, E Murat Sozer

Journal of Composite Materials

Retricted access

Research article

First published 1994-10

Cure Characterization of Thick SMC Parts Using Dielectric and Finite Difference Analysis

David R. Day

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2014-4

Solidification cracking in laser GMA hybrid welding of thick-walled parts

M. O. Gebhardt, A. Gumenyuk, M. Rethmeier

Science and Technology of Welding and Joining

Free access

Research article

First published 2018-2

Fabrication induced spring-back in thermosetting woven composite parts with variable thickness

Mumtaz Ali, Yasir Nawab, Abdelghani Saouab [...]

Journal of Industrial Textiles

Retricted access

Research article

First published 2022-12

Film Thickness in Elastohydrodynamically Lubricated Slender Elliptic Contacts: Part II – Experimental Validation and Minimum Film Thickness

Marius Wolf, Petr Sperka, Josef Fryza [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2008-9

Multilayer plug concept to enhance thickness distribution control of deep thermoformed parts

F. M. Duarte, J. A. Covas

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2017-8

Variable thickness scroll compressor performance analysis—Part II: Dynamic modeling and model validation

Peng Bin, Vincent Lemort, Arnaud Legros [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2017-8

Variable thickness scroll compressor performance analysis—Part I: Geometric and thermodynamic modeling

Peng Bin, Vincent Lemort, Arnaud Legros [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 1999-05

Curing of Thick Angle-Bend Thermoset Composite Part: Curing Cycle Effect on Thickness Variation and Fiber Volume Fraction

Malak I. Naji, Suong V. Hoa

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2015-4

An investigation into the effect of variable flash thickness on the strength of an AA7075 part obtained by hot closed-die forging

Saeed Zare Chavoshi, Mehdi Tajdari, Xichun Luo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results