Sage Journals: Discover world-class research

Retricted access

Research article

First published 1994-02

A Self-Aligned Test Fixture for Interlaminar Tensile Testing of Two-Dimensional Carbon-Carbon Composites

Ajit K. Roy

Journal of Composite Materials

Retricted access

Research article

First published 1997-03

Biaxial Testing of Unidirectional Carbon-Epoxy Composite Using Biaxial Iosipescu Test Fixture

M. V. Balakrishnan, B. Bansal, M. Kumosa

Journal of Composite Materials

Retricted access

Review article

First published 2021-10

A novel test fixture for mode III fracture characterization of monolithic laminates and composite sandwich specimens

Pietro Sabbadin, Christian Berggreen, Brian Nyvang Legarth [...]

Journal of Composite Materials

Retricted access

Research article

First published 2009-09

Development of a Modified Flat-plate Test Specimen and Fixture for Composite Materials Crush Energy Absorption

Paolo Feraboli

Journal of Composite Materials

Retricted access

Research article

First published 2026

Evaluation of a modified uniaxial tension test fixture for dynamic characterization of elastomers at moderate strain rate loading

Md Tareq Siddiqui, Suresh Keshavanarayana, Gerardo Olivares

Journal of Elastomers & Plastics

Retricted access

Research article

First published 2023-6

Methodology for testing the compressive strength of pultruded composites

Sachin R Vankar, Ameya N Kaore, Chandra S Yerramalli

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2005-10

Effects of Friction,Geometry,and Fixture Compliance on the Perceived Toughness from Three-and Four-Point Bend End-Notched Flexure Tests

Barry D. Davidson, Xuekun Sun

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2015-9

Abrasive wear response of cryotreated EN45 steel in simulated wear test rig fixture

N. B. Dhokey, A. Raskar, A. R. Hake [...]

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2007-05

Influences of Friction,Geometric Nonlinearities,and Fixture Compliance on Experimentally Observed Toughnesses from Three and Four-point Bend End-notched Flexure Tests

Barry D. Davidson, Xuekun Sun, Anthony J. Vinciquerra

Journal of Composite Materials

Retricted access

Research article

First published 2024-2

Investigation on the effect of strain rate on standard involute and asymmetric polymer gears using the newly design fixture for single tooth testing method

Mohit Jain, Santosh Patil

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results