Sage Journals: Discover world-class research

Abstract

The interlaminar tensile testing of two-dimensional carbon-carbon laminates requires special attention on aligning the specimen with the test fixture. A selfaligned test fixture is designed to efficiently carry out such tests. The self-alignment of the two pull rods of the test fixture is achieved by holding the threaded pull rods by means of a nut prior to gripping the pull rods with the loading frame. It is demonstrated that the fixture can easily be used to measure interlaminar tensile stiffness and strength of thin carbon-carbon specimens. The interlaminar tensile stiffness and strength of three carbon-carbon laminates ([0/90]_2s, [0/90/ ±45]_s, and [0/90/ ±45]_3s) measured by the present test fixture are reported.

Get full access to this article

View all access options for this article.

References

1. Chou, T.-W and F. K. Ko . 1989. Chapter 7, Textile Structural Composites, Elsevier.

2. Jortner, J. 1986. 'A Model for Nonlinear Stress-Strain Behavior of 2D Composites with Brittle Matrices and Wavy Yarns," ASME AMD-82, pp. 135-146.

3. Jortner, J. 1989. "Nonlinear and Bimodular Stress-Strain Behavior of Elastic Unidirectional Composites at Small Strain," Proc. 4th Japan-U.S. Conference on Composite Materials, Lancaster, PA: Technomic Publishing Co., Inc., pp. 857-866.

4. Stanton, S. L. and T. E. Kipp . "Nonlinear Mechanics of Two-Dimensional Carbon-Carbon Composite Structures and Materials," AIAA Journal, 23(4):1278-1284.

5. Yurgartis, S. W. et al. 1993. "Measurement of Yarn Shape and Nesting in Plain-Weave Composites," Composites Science and Technology, 46:39-50.

6. Yurgartis, S. W. et al. 1992. "Quantification of Microcracking in Brittle-Matrix Composites," Journal of Materials Science, 27:6679-6686.

7. Jortner, J. 1989. "Effects of Crimp Angle on the Tensile Strength of a Carbon-Carbon Laminate," Proc. Symposium on High Temperature Composites, American Society for Composites, Dayton, OH, June 1989, pp. 243-251.

8. Pollock, P. B. 1990. "Tensile Failure in 2-D Carbon-Carbon Composites," Carbon, 28(5):717-732.

9. Yurgartis, S. W. et al. 1992. "Damage Representation and Evaluation Based on in-situ Microstructural Measurements in Tensile Loading of Carbon-Carbon Composites," in Constitutive Behavior of High Temperature Materials, ASME Winter Annual Meeting, December 1992.

10.

10. Gupta, V. et al. 1992. "Failure Mechanisms of 2D Laminated Carbon-Carbon Composites under Uniaxial Compression," 7th Technical Conference, American Society for Composites, Penn State University, October 13-15, 1992, pp. 481-492.

11.

11. Anand, K. et al. "Shear Fracture of Laminated Carbon-Carbon Composites," 7th Technical Conference, American Society for Composites, Penn State University, October 13-15, 1992, pp. 493-505.

12.

12. Thorp, K. 1993. University of Dayton Research Institute, unpublished data.

13.

13. Kim, R. Y. , F Abrams and M. Knight . 1988. "Mechanical Characterization of a Thick Composite Laminate," Proceedings of the American Society, for Composites, 3rd Technical Conference, Seattle, Washington, September 25-29, 1988.

14.

14. Roy, A. K. and R. Y. Kim . "Interlaminar Normal Stiffness and Strength of Thick Orthotropic Laminates: An Experimental Study," to appear in the Journal of Reinforced Plastics and Composites.

15.

15. Hageman, D. 1992. "Finite Element Analysis of Interlaminar Tensile Test Specimens," Final Report, AFOSR Summer Research Program, Wright Laboratory.

A Self-Aligned Test Fixture for Interlaminar Tensile Testing of Two-Dimensional Carbon-Carbon Composites

Abstract

Get full access to this article

References