Sage Journals: Discover world-class research

Retricted access

Research article

First published 2017-7

Feasibility study on using thioether as an emergency backup lubrication system on a large helicopter main gearbox

Fang Duan, Shy Chuan Tee, Michael Corsar [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2015-12

Design and application on experimental platform for high-speed bearing with grease lubrication

He Qiang, Li Anling, Shen Yuan [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2000-6

Leakage characteristics of non-contact seal types for high-speed spindles

K J Chun, B C Na, D-C Han

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1964-6

Paper 14: Initial Experiences with an Oil-Mist Lubrication System and Some Thoughts on the Possibilities of Further Developments

D. W. Bell, H. Rushforth

Proceedings of the Institution of Mechanical Engineers,Conference Proceedings

Retricted access

Research article

First published 2013-12

Experimental investigations on influence of mist cooling using nanofluids on machining parameters in turning AISI 1040 steel

M Amrita, RR Srikant, AV Sitaramaraju [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Open access

Research article

First published 2021-11

Analysis on the escape phenomenon of oil mist from turbine lower guide bearing based on VOF model

Jiayang Pang, Huizi Liu, Xiaobing Liu [...]

Advances in Mechanical Engineering

Open access

Research article

First published 2019-1

Parameter optimization of a motorized spindle lubrication system using biogeography-based optimization

Lixiu Zhang, Shiyao Yu, Yuhou Wu [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2017-1

Tool design effect on microlubrication spray efficiency in milling using inner channels

Arnaud Duchosal, Roger Serra, René Leroy [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2011-8

Investigation of cutting force and temperature of end-milling Ti–6Al–4V with different minimum quantity lubrication (MQL) parameters

Z Q Liu, X J Cai, M Chen [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2014-3

Preparation and characterization of properties of nanographite-based cutting fluid for machining operations

M Amrita, RR Srikant, AV Sitaramaraju [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Search results