Sage Journals: Discover world-class research

Open access

Research article

First published 2025-3

On the effects of tool nose radius in alleviating parasitic mechanisms for cutting of aluminum alloy

Sweta Baruah, James B. Mann, Srinivasan Chandrasekar [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2025

Optimization of turning nose radius for Haynes 230: A hybrid RSM and deep learning approach

Ranganath KJ, H Shivananda Nayaka

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2018-1

A Study of Cutting Temperatures in Turning Carbon-Fiber-Reinforced-Plastic (CRFP) Composites with Nose Radius Worn Tools

Chung-Shin Chang

Polymers and Polymer Composites

Retricted access

Research article

First published 2023-3

Effect of nose radius on the chip morphology,cutting force and tool wear during dry turning of Inconel 718

A. Shailesh Rao

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 1987-5

Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning

H T Young, P Mathew, P L B Oxley

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2016-9

An investigation of optimum cutting conditions in turning nodular cast iron using carbide inserts with different nose radius

Essam Ali Al Bahkali, Adham Ezzat Ragab, Ehab Adel El Danaf [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Review article

First published 1996-10

Prediction of Cutting Forces and Built-Up Edge Formation Conditions in Machining With Oblique Nose Radius Tools

J A Arsecularatne, R F Fowle, P Mathew [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2003-8

The effects of tool geometry change on shearing edge finish in fine-blanking of different materials

Y C Leung, L C Chan, C H Cheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-8

Numerical simulation of the influence of tool geometry on energy consumption during micro turning of titanium alloy

JR Nijin, T Jagadesh

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 1995-8

Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining with Nose Radius Tools

J A Arsecularatne, P Mathew, P L B Oxley

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results