Sage Journals: Discover world-class research

Free access

Research article

First published 2011-9

Estimation of minimum chip thickness in micro-milling using acoustic emission

A J Mian, N Driver, P T Mativenga

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2019-5

Analysis of the minimum chip thickness during turning of duplex stainless steel

Fredrik Schultheiss, Mathias Agmell, Volodymyr Bushlya [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2020-10

An experimental analysis of minimum chip thickness in micro-milling of two different titanium alloys

Kubilay Aslantas, Luqman KH Alatrushi, Fevzi Bedir [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

Micro milling of WAAM-CMT ER70S-6: Estimating minimum uncut chip thickness interval via surface finish and burr formation

André Luis Silva da Costa, Maksym Ziberov, Déborah de Oliveira

Journal of Micromanufacturing

Free access

Research article

First published 2008-2

Arbitrary Lagrangian Eulerian analysis on cutting with a honed tool

H A Kishawy, I M Deiab, A J Haglund

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-5

Material microstructure effects in micro-endmilling of Cu99.9E

AM Elkaseer, SS Dimov, DT Pham [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2024-9

Study on the chip shape for micromilling of Polyether-Ether-Ketone

Hao Xu, Xiang Cheng, Guangming Zheng [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2014-6

Experimental investigation of a slip-line field model for a worn cutting tool

Alper Uysal, Erhan Altan

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2011-11

Investigation of the size effect on burr formation in two-dimensional vibration-assisted micro end milling

H Ding, S-J Chen, R Ibrahim [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-1

Model of the instantaneous undeformed chip thickness in micro-milling based on tooth trajectory

Xiaohong Lu, Zhenyuan Jia, Furui Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results