Sage Journals: Discover world-class research

Retricted access

Research article

First published 2007-3

Comparison of height replication properties of micro-injection moulding and micro-injection–compression moulding for production of microstructures on lightguiding plates

Y. K. Shen

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2011-11

Simulation of the micro-injection moulding process: effect of the thermo-rheological status on the morphology

T Nguyen-Chung, C Löser, G Jüttner [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2008-9

The finite element analysis of melt flow behaviour in micro-injection moulding

C A Griffiths, S S Dimov, E B Brousseau [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2014-6

Design and fabrication of a three-dimensional microfluidic device for blood separation using micro-injection moulding

Usama M Attia, Silvia Marson, Jeffrey R Alcock

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2010-9

One- and two-component micro powder injection moulding derived from thermoplastic microreplication

V. Piotter, T. Mueller, K. Plewa [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2008-6

Gate positioning design of injection mould using bi-objective micro genetic algorithm

J Lee, J Lee

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2005-6

Replication of sub-micrometre features using microsystems technology

J. Pirskanen, J. Immonen, V. Kalima [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2012-4

Micro-stereolithography tools for small-batch manufacture of polymer micro-parts

C A Griffiths, S S Dimov, S Fischer [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2018-3

Mechanical characterisation and replication quality analysis of micro-injected parts made of carbon nanotube/polyoxymethylene nanocomposites

Claudia Pagano, Rossella Surace, Vincenzo Bellantone [...]

Journal of Composite Materials

Free access

Research article

First published 2024-1

The effect of microstructure on the tensile and impact behaviour of short-glass fibre-reinforced polyamide 6.6 as assessed by micro-computed tomography

N. Rosic, M. Mollo, C. Bernal [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results