Sage Journals: Discover world-class research

Free access

Research article

First published 2002-12

Chondrocyte Damage following Osteochondral Grafting Using Metal and Plastic Punches: Comparative Study in an Animal Model

A Nabavi-Tabrizi, A Turnbull, Q Dao [...]

Journal of Orthopaedic Surgery

Open access

Research article

First published 2023-3

Analysis of the punch motion curve for the springback of U-shaped sheet metal

Tsung-Chia Chen, Shi-Xun Chen, Cheng-Chi Wang [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2022-8

The effects of punch angle in noise and force formation for sheet metal blanking process

Onur Cavusoglu, Hakan Gurun, Fırat Kafkas [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2001-7

Investigation into a new incremental forming process using an adjustable punch set for the manufacture of a doubly curved sheet metal

S J Yoon, D Y Yang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2002-8

Ductile—brittle transition of steel electron beam weld metal in small punch test

X. Gai, Y. S. Sato, H. Kokawa [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2011-4

Numerical Modelling for Sensitivity Analysis of Wood Joints Made with Double-Sided Punched Metal Plate Fasteners

Tinozivashe Zhou, Zhongwei Guan

Advances in Structural Engineering

Retricted access

Research article

First published 2021-7

Experimental investigation of quasi-static behavior of composite and fiber metal laminate panels modified by graphene nanoplatelets

Azadeh Fathi, Gholamhossein Liaghat, Hadi Sabouri [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2023-5

The experimental investigation of springback and roughness parameters in the three-point forming process using terpolymer punch

T Arunkumar, M Ravichandran, M Varatharajulu [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1984-4

A Theoretical Analysis of the Bending into Cylindrical Dies of Metal Strips

T X Yu, W Johnson

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2020-2

Effect of punch geometry on hole expansion ratio

Surajit Kumar Paul

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results