Sage Journals: Discover world-class research

Free access

Research article

First published 2012-9

The effect of the blank holding force on formability in hot deep drawing of boron steel considering heat transfer phenomena and friction coefficient by simulation and experimental investigation

Yuqin Ouyang, Min-Sik Lee, JH Moon [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2012-5

Investigation of thin boron steel sheet formability in hot deep-drawing processes according to process parameters

Min-sik Lee, Seung-cheol Baeck, Chung-gil Kang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1991-6

Hot deep drawing of titanium sheet

M. H. Shipton, W. T. Roberts

Materials Science and Technology

Free access

Research article

First published 2014-4

Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al–Si and Zn-coated boron steel

Min Sik Lee, Jung Hwan Moon, Chung Gil Kang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1994-7

Influence of aluminium and thermomechanical treatment on formability and mechanical properties of type 430 stainless steel

R. Paton

Materials Science and Technology

Retricted access

Research article

First published 1976-1

Influence of composition and microstructure on mechanical working properties of copper-base alloys

R. V. Foulger, E. Nicholls

Materials Science and Technology

Retricted access

Research article

First published 1990-5

Structure,anisotropy,and properties of hot rolled AA 5083 alloy

H. B. McShane, C. P. Lee, T. Sheppard

Materials Science and Technology

Retricted access

Research article

First published 2024-4

Numerical analysis of non-isothermal warm deep drawing of an Al-Mg alloy using different yield criteria and experimental validation

Ved Prakash, D Ravi Kumar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2000-9

Effect of anisotropy in commercial purity titanium on deep drawability at elevated temperatures

Liu J.-M., Chou S.-S.

Materials Science and Technology

Retricted access

Research article

First published 2025

The effects of high strain rates on superplastic forming

Mehmet Yasin Demirel, İbrahim Karaağaç

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Search results