Sage Journals: Discover world-class research

Free access

Review article

First published 1996-10

Prediction of Cutting Forces and Built-Up Edge Formation Conditions in Machining With Oblique Nose Radius Tools

J A Arsecularatne, R F Fowle, P Mathew [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2024-10

Built-up edge formation and flank wear evolution in conventional machining of AZ91 magnesium alloy

Assem Alshibi, Abdelrahman Nasreldin, Salman Pervaiz

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2019-7

Experimental and numerical investigation of perforated cold-formed steel built-up I-section columns with web stiffeners and complex edge stiffeners

Chungang Wang, Qinglin Guo, Zhuangnan Zhang [...]

Advances in Structural Engineering

Retricted access

Research article

First published 1979-1

Structure of built-up edge formed in metal cutting

J. Wallbank

Materials Science and Technology

Retricted access

Research article

First published 1981-1

Scale formation on workpiece surface from built-up edge

R. L. Aghan, G. R. Wilms

Materials Science and Technology

Retricted access

Research article

First published 1988-10

Effect of soft additives (Pb,Bi) on formation of built-up edge

H. Yaguchi

Materials Science and Technology

Retricted access

Research article

First published 2019-6

Effect of longitudinally intermittent movement of cutting tool in drilling of AISI 1045 steel: A three-dimensional numerical simulation

Mohammad Lotfi, Saeid Amini

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2024-9

Study of the influence of cutting parameters on tool wear and the state of the machined surface

Benattia Bloul, Hélène Chanal, Merzouk Meziane

Advances in Mechanical Engineering

Free access

Review article

First published 2018-10

Investigation of effects of MgO ratio on the surface quality and tool wear in turning Al–MgO composites

Muharrem Pul

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2013-8

Wear mechanism analysis in milling of Ti-6Al-4V alloy

Syed HI Jaffery, Mushtaq Khan, Nadeem A Sheikh [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results