Search results: Sage Journals

Open accessResearch articleFirst published February, 2024

A method for fast reconstruction of closed section workpiece surface using point clouds

Pei-Yao Li, De-Ning Song, Jing-Hua Li [...]

Advances in Mechanical Engineering

Open accessResearch articleFirst published May, 2020

Binocular stereovision omnidirectional motion handling robot

Bo Tang, Li Jiang

International Journal of Advanced Robotic Systems

Free accessResearch articleFirst published March, 2019

Error compensation in the five-axis flank milling of thin-walled workpieces

Hao Si, Liping Wang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published June, 2024

Adaptive backstepping dynamic sliding mode control for maglev turning motor spindle based on limited time preset performance

Houcai Liu, Zheng Cao, Huimin Kang [...]

Journal of Vibration and Control

Free accessResearch articleFirst published January, 2019

Systematic study of the prediction methods for machined surface topography and form error during milling process with flat-end cutter

Xing Zhang, Wei Zhang, Jun Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published May, 2013

Computed tomography in quality control: chances and challenges

Albert Weckenmann, Philipp Krämer

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published January, 2022

Springback prediction and compensation method for anisotropy sheet in multi-point forming

Chunguo Liu, Ming Li, Erhu Qu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published August 30, 2017

Multi-material linearization beam hardening correction for computed tomography

J.J. Lifton

Journal of X-Ray Science and Technology

Open accessResearch articleFirst published May, 2026

Study on residual stress and deformation of titanium alloy thin-walled parts by ultrasonic shot peening

Dou Yan-Tao, Zhang Hong-Wei, Chen Bo-Yu [...]

Advances in Mechanical Engineering

Restricted accessResearch articleFirst published April, 2026

Surface roughness prediction in turning processes using CEEMD-based vibration signal denoising and LSTM networks

Andrews Athisayam, Manisekar Kondal

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Open accessResearch articleFirst published February, 2024

A method for fast reconstruction of closed section workpiece surface using point clouds

Pei-Yao Li, De-Ning Song, Jing-Hua Li [...]

Advances in Mechanical Engineering

Open accessResearch articleFirst published May, 2020

Binocular stereovision omnidirectional motion handling robot

Bo Tang, Li Jiang

International Journal of Advanced Robotic Systems

Free accessResearch articleFirst published March, 2019

Error compensation in the five-axis flank milling of thin-walled workpieces

Hao Si, Liping Wang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published June, 2024

Adaptive backstepping dynamic sliding mode control for maglev turning motor spindle based on limited time preset performance

Houcai Liu, Zheng Cao, Huimin Kang [...]

Journal of Vibration and Control

Free accessResearch articleFirst published January, 2019

Systematic study of the prediction methods for machined surface topography and form error during milling process with flat-end cutter

Xing Zhang, Wei Zhang, Jun Zhang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free accessResearch articleFirst published May, 2013

Computed tomography in quality control: chances and challenges

Albert Weckenmann, Philipp Krämer

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Restricted accessResearch articleFirst published January, 2022

Springback prediction and compensation method for anisotropy sheet in multi-point forming

Chunguo Liu, Ming Li, Erhu Qu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Restricted accessResearch articleFirst published August 30, 2017

Multi-material linearization beam hardening correction for computed tomography

J.J. Lifton

Journal of X-Ray Science and Technology

Open accessResearch articleFirst published May, 2026

Study on residual stress and deformation of titanium alloy thin-walled parts by ultrasonic shot peening

Dou Yan-Tao, Zhang Hong-Wei, Chen Bo-Yu [...]

Advances in Mechanical Engineering

Restricted accessResearch articleFirst published April, 2026

Surface roughness prediction in turning processes using CEEMD-based vibration signal denoising and LSTM networks

Andrews Athisayam, Manisekar Kondal

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering