Sage Journals: Discover world-class research

Free access

Research article

First published 2022-7

Comparison of machinability of nickel alloys using WEDM

Ales Polzer, Katerina Mouralova, Libor Benes [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2024-4

Enhancing low-speed WEDM machining capabilities on Nitronic-50 with a constant frequency ultrasonic hybrid method

C Balasubramaniyan, K Rajkumar

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2022-5

Multicut technology used in WEDM machining of Mar-M247

Katerina Mouralova, Ales Polzer, Libor Benes [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-10

Influence of different wire materials on the machining of Albromet W130 by WEDM

Katerina Mouralova, Libor Benes, Josef Bednar [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-3

Surface burn prevention based on the probability control of pulses with ignition delay in WEDM

Hongwei Pan, Zhidong Liu, Cong Deng

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-10

Experimental analysis of microhardness changes of subsurface areas affected by WEDM

Katerina Mouralova, Stefan Michna, Radim Zahradnicek [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2025-6

Modeling and analysis of WEDM with a new deep neural network

Aybars Mahmat, Gurkan Dogan, Burhan Ergen [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2024

Precision machining of DMLS Cu electrodes via WEDM: Parameter optimization and predictive modelling for enhanced performance

Thangarajan Sivasankaran Senthilkumar, Mohan Sridharan, Rengarajan Muralikannan [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2023-9

Analysis of the effect of material thickness during the WEDM processon cutting speed,topography and morphology

Katerina Mouralova, Libor Benes, Tomas Prokes [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021

Experimental investigation and optimization of machining performance characteristics during WEDM of inconel 718: On evaluation of wire electrodes and advanced parameter techniques

Anshuman Kumar, Chandramani Upadhyay

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results