Sage Journals: Discover world-class research

Retricted access

Research article

First published 2012-7

Transient liquid phase bonding of aluminium alloy using two-step heating process

X G Wang, X G Li, C G Wang

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2007-7

Effect of two step heating process on joint microstructure and properties during transient liquid phase bonding

X. G. Wang, X. G. Li, Q. Yan

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2019-6

Processing and characterization of high strength dual-phase steel by two-step intercritical heat treatment process

Praveen Singh, Satnam Singh, Sanchit Mewar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2025-9

Sintering of alumina using a modified two-step sintering process

SG Savio, Sarabjit Singh, B Ramakrishna [...]

Advances in Applied Ceramics: Structural,Functional and Bioceramics

Retricted access

Research article

First published 2021-9

Dynamic deformation behaviour of 0.51C–1.72Si–0.83Mn–0.56Co high-strength steel

Minqiang Zou, Chengcong Huang, Liang Qi [...]

Materials Science and Technology

Free access

Research article

First published 2025-12

Comparative study of single-step and two-step thermal recycling for near 100% carbon fiber recovery from T800 CFRP waste

Bilal Shabbir Chohan, Zewei Yuan, Ali Riaz [...]

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2011-5

Heat treatment method for making high strength and conductivity Cu–Cr–Zr alloy

G B Lin, Z D Wang, M K Zhang [...]

Materials Science and Technology

Retricted access

Research article

First published 2012-8

Flowsheet development,process simulation and economic feasibility analysis for novel suspension ironmaking technology based on natural gas: Part 1 – Flowsheet and simulation for ironmaking with reformerless natural gas

H K Pinegar, M S Moats, H Y Sohn

Ironmaking & Steelmaking: Processes,Products and Applications

Retricted access

Research article

First published 2017-3

Effect of heating rate on microstructural evolution and mechanical properties of cold-rolled quenching and partitioning steel

G. Liu, S. G. Zhang, Q. G. Meng [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Retricted access

Research article

First published 2002-6

Effects of isothermal heating procedure and strontium addition on semisolid forming of AZ91 magnesium alloy

J.-M. Kim, K.-T. Kim, W.-J. Jung

Materials Science and Technology

Search results