Sage Journals: Discover world-class research

Free access

Research article

First published 2024-1

Experimental investigation of uncoated,single layer,and multilayer-coated TiAlN/TiN tool inserts in dry orthogonal cutting of AISI/SAE 4140 alloy steel

Faraz Akbar, Muhammad Arsalan

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2011-5

Fuzzy Logic-Based Modeling of Surface Roughness Parameters for CNC Turning of PEEK CF30 by TiN-Coated Cutting Tools

F. M. Cabrera, E. Beamud, I. Hanafi [...]

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 1992-1

Multilayer CVD Coatings of Tic+ Tin and their Effect on Cutting Tool Life

R. Porat

Surface Engineering

Free access

Research article

First published 2018-5

The effect of monolayer TiCN-,AlTiN-,TiAlN-and two layers TiCN + TiN- and AlTiN + TiN-coated cutting tools on tool wear,cutting force,surface roughness and chip morphology during high-speed milling of Ti6Al4V titanium alloy

Emel Kuram

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1986-1

Comparison between use of TiN-coated and uncoated high-speed steel and fine-grained cemented carbide tools in cutting of resulphurized 0·08 wt-%C free-cutting steel

R. Milovic, E.F. Smart, M.L.H. Wise

Materials Science and Technology

Free access

Research article

First published 2011-10

An investigation of multilayer coated (TiCN/Al 2 O 3 -TiN) tungsten carbide tools in high speed cutting using a hybrid finite element and experimental technique

M Fahad, P T Mativenga, M A Sheikh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2014-2

Corrosion behavior of TiN-coated cutting carbide tools

Nadjette Belhamra, Abdelouahed Chala

Main Group Chemistry

Free access

Research article

First published 2012-2

Multi-criteria Optimization Using Taguchi and Grey Relational Analysis in CNC Turning of PEEK CF30

F.M. Cabrera, D. Fuentes, I. Hanafi [...]

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2019-11

Preparation and characterization of electrodeposited Ni–TiC,Ni–TiN,and Ni–TiC–TiN composite coatings on tungsten carbide cutting tool

Abhineet Saini, BS Pabla, SS Dhami

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2009-9

Surface roughness prediction based on the correlation between surface roughness and cutting vibrations in dry turning with TiN-coated carbide tools

D R Salgado, I Cambero, A Marcelo [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results