Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-6

Minimization of weld line movement in heat-assisted forming of tailor welded blanks

VVN Satya Suresh, Srinivasa Prakash Regalla, Amit Kumar Gupta

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2011-11

Influence of weld geometry and mismatch on formability of aluminium tailor welded blanks: numerical and experimental analysis

C Leitao, B K Zhang, R Padmanabhan [...]

Science and Technology of Welding and Joining

Free access

Research article

First published 2014-9

Influence of anisotropy parameter on deep drawing of tailor welded blanks of low-carbon steels

Vysakh Vasudevan, Kaushik Bandyopadhyay, Sushanta K Panda

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2012-5

Analysis of weld location effect and thickness ratio on formability of tailor welded blank

M Riahi, A Amini, J Sabbaghzadeh [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2010-2

Application of a few necking criteria in predicting the forming limit of unwelded and tailor-welded blanks

B Srinivas Naik, P Janaki Ramulu, R Ganesh Narayanan

The Journal of Strain Analysis for Engineering Design

Free access

Research article

First published 2017-1

Theoretical and experimental investigation of deep drawing of tailor-welded IF steel blanks with non-uniform blank holder forces

Mohammad Hossein Asadian-Ardakani, Mohammad Reza Morovvati, Mohammad Javad Mirnia [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2018-10

Experimental and numerical investigations on springback in V-bending of tailor-welded blanks of interstitial free steel

Vijay Gautam, D Ravi Kumar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2018-4

Analytical prediction of springback in bending of tailor-welded blanks incorporating effect of anisotropy and weld zone properties

Vijay Gautam, Vinayak Manohar Raut, D Ravi Kumar

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2018-11

Production of tailor-welded blanks by vertical compensation friction stir welding technique

Mohamed Abu–Okail, Moataz H. Ata, Ahmed Abu-oqail [...]

Materials Science and Technology

Retricted access

Research article

First published 2024-3

Effect of strain rate on tensile behavior of tailor welded blanks

Ahmad Amini, Ali Alavi Nia

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results