Sage Journals: Discover world-class research

Retricted access

Research article

First published 2002-6

Effect of nitrogen content on simulated heat affected zone toughness of titanium containing thermomechanically controlled rolled steel

K.-S. Bang, H.-S. Jeong

Materials Science and Technology

Retricted access

Research article

First published 2005-9

Microstructural characterisation of stir zone containing residual ferrite in friction stir welded 304 austenitic stainless steel

S. H. C. Park, Y. S. Sato, H. Kokawa [...]

Science and Technology of Welding and Joining

Free access

Research article

First published 2020-4

Recast layer and heat-affected zone structure of ultra-fined grained low-carbon steel machined by electrical discharge machining

Mohammad Sajjad Mahdieh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2012-7

Effects of pin diameter on microstructures and mechanical properties of friction stir spot welded AZ31B magnesium alloy joints

J Shen, D Wang, K Liu

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2010-8

Study of microstructural evolution of friction taper plug welded joints of C–Mn steels

J.S. Unfried, M. T. P. Paes, T. F. C. Hermenegildo [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2011-5

Microstructure and mechanical properties of friction stir welded 7136–T76 aluminium alloy

I Kalemba, S Dymek, C Hamilton [...]

Materials Science and Technology

Retricted access

Research article

First published 2012-1

On microstructure and mechanical properties of linear friction welded dissimilar Ti–6Al–4V and Ti–6·5Al–3·5Mo–1·5Zr–0·3Si joint

T J Ma, B Zhong, W-Y Li [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2013-5

Thermomechanical fatigue behaviour and mode of failure of laser welded single crystal Ni based superalloy

J Durocher, J R Cahoon, N L Richards

Materials Science and Technology

Retricted access

Research article

First published 2007-7

Piercing/extrusion and FSW nugget microstructure formation in Al alloys

H. J. McQueen, M. Cabibbo, E. Evangelista

Materials Science and Technology

Retricted access

Research article

First published 2015-6

Investigation of friction stir welding tool parameters using FEM and neural network

Mohammad Hasan Shojaeefard, Abolfazl Khalkhali, Mostafa Akbari [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results