Sage Journals: Discover world-class research

Free access

Research article

First published 2023-1

Investigation of the effect of FDM process parameters on mechanical properties of 3D printed PA12 samples using Taguchi method

Menderes Kam, Ahmet İpekçi, Ömer Şengül

Journal of Thermoplastic Composite Materials

Open access

Research article

First published 2022

Mechanical properties and morphology of HDPE/PA12 blends compatibilized with HDPE-alt-MAH

Geovane de Almeida Santos da Silva, José Roberto Moraes d’Almeida

Polymers and Polymer Composites

Open access

Research article

First published 2021-11

Ageing of laser sintered glass-filled Polyamide 12 (PA12) parts at elevated temperature and humidity

Thomas Dooher, Edward Archer, Tom Walls [...]

Polymers and Polymer Composites

Retricted access

Research article

First published 2023-10

Optimization of Selective Laser Sintering Process Parameters Based on PA12 Powders for Bone Tissue Scaffolds

Ran Yan, Changjiang Xie, Ze Zhao [...]

3D Printing and Additive Manufacturing

Free access

Research article

First published 2005-01

A Novel Polyamide 12 Polymerization System and its Use for a LCM-process to Produce CFRP

Patrick Rosso, Klaus Friedrich, Andreas Wollny [...]

Journal of Thermoplastic Composite Materials

Free access

Review article

First published 2024-10

Effect of process parameters on tensile properties of 3D printed continuous aramid fiber reinforced nylon 12 composites

Xibin Jiang, Zhongde Shan, Yong Zang [...]

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2012-4

Analytical Methodology for Evaluating Tape Laid Carbon Fibre Reinforced Pa12 Components

W. Michaeli, C. Hopmann, R. Schöldgen

International Polymer Science and Technology

Retricted access

Research article

First published 2023-12

Effect of build orientation on the green tribological properties of multi-jet fusion manufactured PA12 parts

Beyza Gavcar, Emir Halit Sumer, Binnur Sagbas [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024-9

Influence of post-processing treatment on the surface roughness of polyamide PA12 samples manufactured using additive methods in the context of the production of orthoses

Paweł Turek, Anna Bazan, Andrzej Zakrecki

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2021-08

Mechanical and Structural Evaluation of the PA12 Desktop Selective Laser Sintering Printed Parts Regarding Printing Strategy

Magdalena Tomanik, Matylda Żmudzińska, Magdalena Wojtków

3D Printing and Additive Manufacturing

Search results