Sage Journals: Discover world-class research

Retricted access

Research article

First published 2003-8

Automatic drilling control based on minimum drilling specific energy using PDC and WC bits

A. Ersoy

Mining Technology: Transactions of the Institutions of Mining and Metallurgy

Retricted access

Research article

First published 2004-12

A methodology for estimation of the specific rock energy index using corrected down-the-hole drill monitoring data

Luis E. Izquierdo, Luciano E. Chiang

Mining Technology: Transactions of the Institutions of Mining and Metallurgy

Retricted access

Research article

First published 2025

Mechanical specific energy-based optimization of drilling operations in Changning: Methodology and practical implications

Yongxing Sun

Journal of Computational Methods in Sciences and Engineering

Free access

Research article

First published 2016-9

Effect of drilling parameters on specific cutting energy and delamination of a composite made of unsaturated polyester resin and chopped glass fibres

Anant B Marathe, Anil M Javali

Journal of Thermoplastic Composite Materials

Retricted access

Review article

First published 1995-6

Investigation of Factors Affecting Wear Characteristics in Rubber–Metal Sliding Contact

S Mok, D G Gorman

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024-4

Evaluation of delamination in drilling of SiC p /sisal fiber reinforced epoxy composites by the analysis of acoustic emission and cutting force: Influence of tool condition

Muthusamy Kamaraj, Muniyandi Prakash, Abburi Lakshmankumar [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2005-05

Influence of Consolidation Process on the Drilling Performance and Machinability of PIXA-M and PEEK Thermoplastic Composites

D. Kim, M. Ramulu, X. Doan

Journal of Thermoplastic Composite Materials

Retricted access

Research article

First published 2005-08

Machining of Fiber-reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling

N. S. Mohan, A. Ramachandra, S. M. Kulkarni

Journal of Reinforced Plastics and Composites

Open access

Research article

First published 2022-11

The influence of tool quality on the machining of additive manufactured and powder metallurgy titanium alloys

Junhui Ma, Tanny Tran, Olufisayo A. Gali [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2020-7

A new approach to evaluate rock drillability of polycrystalline diamond compact bits using scratch test data

Yannong Han, Xiaorong Li, Yongcun Feng

Energy Exploration & Exploitation

Search results