Sage Journals: Discover world-class research

Retricted access

Research article

First published 2004-10

Influence of TiO 2,Cr 2 O 3 and ZrO 2 on sintering and machinability of fluorophlogopite glass ceramics

B. Eftekhari Yekta, S. Hasheminia, P. Alizadeh

Advances in Applied Ceramics: Structural,Functional and Bioceramics

Free access

Research article

First published 2009-1

Numerical simulation of single pulse discharge machining insulating Al 2 O 3 ceramic

Y H Liu, L L Yu, Y L Xu [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2020-10

Effect of the Al 2 O 3 powder addition on the metal removal rate and the surface roughness of the electrochemical grinding machining

Hossam M Yehia, Mohamed Hakim, Ahmed El-Assal

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2024-6

Influence of self-lubricating elements (SrSO 4,Mo,and CaF 2 ) on machining performance of Al 2 O 3 -ZrO 2 (Y 2 O 3 )-NiCr-Ag cutting tool over a wide cutting speed range

Bagadi Pradeep Kumar, Pujari Srinivasa Rao, Dora Siva Prasad [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2020-5

Study on hole machining for the constant feed rate of Al 2 O 3 engineering ceramics through low-frequency axial vibration

Lei Zheng, Chen Zhang, Xianglong Dong [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-6

Effects of hybrid Al 2 O 3 - SiO 2 nanoparticles in deionized water on the removal rate and surface roughness during electrical discharge machining of Ti-6Al-4V

Saeed Oskueyan, Vahid Abedini, Alireza Hajialimohammadi

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2011-7

Experimental robust optimal machining of hardened AISI 420 stainless steel with Al 2 O 3 + TiCN mixed ceramic tool

E Acar, N Camuşcu, A O Er [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2011-3

Effect of minimum quantity lubrication with Al 2 O 3 nanoparticles on surface roughness,tool wear and temperature dissipation in machining Inconel 600 alloy

V Vasu, G Pradeep Kumar Reddy

Proceedings of the Institution of Mechanical Engineers,Part N: Journal of Nanomaterials,Nanoengineering and Nanosystems

Free access

Research article

First published 2015-9

Machinability experimental study of sintered alumina (Al 2 O 3 ) ceramics material by chemical vapor deposition diamond coating milling tools

Jiancheng Liu, Robert Camfield

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-12

Wire EDM machining characteristics of squeeze cast Al-Zn-Mg-Cu/(SiC + Al 2 O 3 ) hybrid composite by TOPSIS approach

M Karthikraja, S Selvaraj, M Uthayakumar [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Search results