Sage Journals: Discover world-class research

Abstract

This paper presents an experimental rig for measuring the incident radiation heat flux distribution surrounding a jet fire. The methodology uses a line of surface thermocouples attached to a steel bar. The thermocouples measure the temperature time history of the steel bar in response to an imposed incident heat flux. The theoretical basis of the methodology is an energy balance for any point on the steel bar. The energy balance is formulated as a lumped capacitance model. All of the assumptions in the theory are shown to be valid and the accuracy of the experimental methodology is demonstrated. Finally the educational value of the rig is discussed with an indication of how it can be used to enhance the educational experience of an undergraduate engineer taking an advanced heat transfer module.

Keywords

radiation heat flux jet fires lumped capacitance model

Get full access to this article

View all access options for this article.

References

Onokpe

Cumber

P. S.

, ‘Modelling lifted hydrogen jet fires using the boundary layer equations’, J. Applied Thermal Engineering, 29 (2009), 1383–1390.

Cumber

P. S.

Spearpoint

, ‘A computational flame length methodology for propane jet fires’, Fire Safety Journal, 41 (2006), 215–228.

Cumber

P. S.

, ‘Accelerating ray convergence in jet fire radiation modelling using Sobol sequences’, Int. J. Thermal Science, 48 (2009), 1338–1347.

Jeng

S. M.

Chen

L. D.

Faeth

G. M.

, ‘The structure of buoyant methane and propane diffusion flames’, in Proc. 19th Int. Symposium Combustion (Combustion Institute, Pittsburgh, 1982), pp. 349–358.

Fairweather

Jones

W. P.

Lindstedt

R. P.

, ‘Predictions of radiative heat transfer from a turbulent reacting jet in a cross-wind’, Combust. Flame, 89 (1992), 45–63.

Siegel

Howell

J. R.

, Thermal Radiation Heat Transfer, 3rd edition (Hemisphere Publishing, Washington, DC, 1992).

Moran

M. J.

Shapiro

H. N.

Munson

B. R.

DeWitt

D. P.

, Introduction to Thermal Systems Engineering (John Wiley and Sons Inc., London, 2003).

Cumber

P. S.

Passarelli

K. S.

, ‘The numerical analysis of precision quartz oscillator simulation – an area corrected flux finite volume scheme’, J. Num. Heat Transfer, Part B, 52 (2007), 201–230.

Press

W. H.

Teukolsky

S. A.

Vetterling

W. T.

Flannery

B. P.

, Numerical Recipes in Fortran 77, 2nd edition (Cambridge University Press, Cambridge, 1992).

10.

Cumber

P. S.

Fairweather

Ledin

, ‘Application of wide band radiation models to non-homogeneous combustion systems’, Int. J. Heat Mass Transfer, 41 (1998), 1573–1584.

11.

Fairweather

Jones

W. P.

Ledin

Lindstedt

, ‘Predictions of soot formation in turbulent non-premixed propane flames’, in Proc. 22nd Int. Symposium Combustion (Combustion Institute, Pittsburgh, 1992), pp. 1067–1074.

12.

Jones

W. P.

Launder

B. E.

, ‘The prediction of laminarization with a two-equation turbulence model’, Int. J. Heat Mass Transfer, 15 (1972), 301–314.

13.

Cumber

P. S.

, ‘Improvements to the discrete transfer method of calculating radiative heat transfer’, Int. J. Heat Mass Transfer, 38 (1995), 2251–2258.

14.

Grosshandler

W. L.

, ‘Radiative heat transfer in non-homogeneous gases: A simplified approach’, Int. J. Heat Mass Transfer, 23 (1980), 1447–1459.

15.

Cumber

P. S.

, ‘Ray effect mitigation in jet fire radiation modelling’, Int. J. Heat and Mass Transfer, 43 (2000), 935–943.

Simple Rig for Measuring Radiation Heat Fluxes from a Jet Fire

Abstract

Keywords

Get full access to this article

References