The objective of this study is to examine the reduction in heating and cooling loads that may be attributed to the use of attic radiant barrier and to identify environmental parameters that influence this reduction. To this end, an experimental study was conducted in Zachary, Louisiana for 8 months on two houses built in the same manner and instrumented with thermocouples to measure the temperature in each hour and each layer of the roof. Results showed that an attic radiant barrier can reduce energy loads from 8% to 25% depending on the climatic conditions. Among the evaluated climatic parameters, ambient air temperature had the greatest effect on the ceiling heat flux.
AsadiSHassanM (2011) Evaluation of the thermal performance of radiant barrier in heating and cooling load reduction of residential buildings. In: KiongWHermreckC (eds) Integrating Sustainability Practices in the Construction Industry. Kansas City, MO: ASCE, pp. 222–230.
4.
AsadiSHassanMMBeheshtiA (2013) Performance evaluation of an attic radiant barrier system using three-dimensional transient finite element method. Journal of Building Physics36: 247–264.
5.
BaldinelliG (2010) A methodology for experimental evaluations of low-e barriers thermal properties: field tests and comparison with theoretical models. Building and Environment45: 1016–1024.
6.
BudaiwiIAbdouAAl-HomoudM (2002) Variations of thermal conductivity of insulation materials under different operating temperatures: impact on envelope-induced cooling load. Journal of Architectural Engineering8: 125–132.
7.
FaireyP (1985) The measured side-by-side performance of attic radiant barrier systems in hot, humid climates. In: Proceedings of the 19th International Thermal Conductivity Conference, Tennessee Technoloical University, Cookeville, TN, October 1985.
8.
HallJA (1985) Performance testing of radiant barriers. In: Third annual symposium on improving building energy efficiency in hot and humid climates, Arlington, TX, November 18–19, pp. 55–77.
9.
HarrisKTMcCartyTARouxJA (1994) Experimental and computational tests involving R-11, R-19 and R-30 fiberglass insulations. Journal of Building Physics17: 197–218.
10.
HarrisKTRouxJAMcCartyTA (1996) Substrate barrier effects on total heat transfer for a R-30 fibrous insulation batt. Journal of Building Physics20: 158–180.
11.
HassidSSantamourisMPapanikolaouN. (2000) The effect of the Athens heat island on air conditioning load. Energy and Buildings32: 131–141.
12.
MedinaMAYoungB (2006) A perspective on the effect of climate and local environmental variables on the performance of attic radiant barriers in the United States. Building and Environment41: 1767–1778.
13.
MedinaMAYoungB (2008) Evaluating the sensitivity of attic radiant barrier performance to climate. Journal of Energy Engineering134: 2–5.
14.
MedinaMAO’NealDLTurnerWD (1998a) A transient heat and mass transfer model of residential attics used to simulate radiant barrier retrofits, part I: development. Journal of Solar Energy Engineering: Transactions of the ASME120: 32–38.
15.
MedinaMAO’NealDLTurnerWD (1998b) A transient heat and mass transfer model of residential attics used to simulate radiant barrier retrofits, part II: validation and simulations. Journal of Solar Energy Engineering: Transactions of the ASME120: 39–44.
16.
MichelsCLambertsRGuthsS (2008) Evaluation of heat flux reduction provided by the use of radiant barriers in clay tile roofs. Energy and Buildings40: 445–451.
17.
MiranvilleFBoyerHLauretP. (2008) A combined approach for determining the thermal performance of radiant barriers under field conditions. Solar Energy82: 399–410.
18.
MiranvilleFFakraAHGuichardS. (2012) Evaluation of the thermal resistance of a roof-mounted multi-reflective radiant barrier for tropical and humid conditions: experimental study from field measurements. Energy and Buildings48: 79–90.
19.
MiranvilleFLauretPMedinaM. (2011) A simplified model for radiative transfer in building enclosures with low emissivity walls: development and application to radiant barrier insulation. Journal of Solar Energy Engineering: Transactions of the ASME133: 021009.
20.
MoujaesSBrickmanR (1995) Simulation and evaluation of passive energy technology in residential space. Energy Sources17(N2): 153–160.
21.
OberDGVolckausenTW (1988) Radiant barrier insulation performance in full scale attic with soffit and ridge ventilation. In: 5th annual symposium on improving building energy efficiency in hot and humid climates, Houston, TX, 12–14 September, pp. 169–173.
22.
PetrieTWWilkesKEChildsPW. (2000) Effect of radiant barriers and attic ventilation on residential attics and attic duct systems: new tools for measuring and modeling. ASHRAE Transactions104: 1175–1192.
23.
SantamourisMPapanikolaouNLivadaI. (2001) On the impact of urban climate on the energy consumption of buildings. Energy and Buildings70: 201–216.
24.
SoubdhanTFeuillardTBadeF (2005) Experimental evaluation of insulation material in roofing system under tropical climate. Solar Energy79: 311–320.
25.
SullivanRNozariSJohnsonR. (1985) Commercial building energy performance analysis using multiple regression. ASHRAE Transactions91: 337–353.
26.
SynnefaASantamourisMAkbariH (2007) Estimating the effect of using cool coatings on energy loads and thermal comfort in residential buildings in various climatic conditions. Energy and Buildings39: 1167–1174.
27.
SynnefaASantamourisMLivadaI (2006) A study of the thermal performance of reflective coatings for the urban environment. Solar Energy80: 968–981.
28.
WiniarskiWDO’NealDL (1996) Quasi-steady model of attic heat transfer. Energy and Buildings24: 183–194.
